1. 8/1/20051 MetaDAQ A Networked Meta Data Acquisition System Jason P. Hanley SEESL University at Buffalo

2. 8/1/2005SEESL - University at Buffalo2 Requirements Provide a common interface to setup and control multiple data acquisition devices Require only one person to operate all the data acquisition devices during a test Provide real-time viewing and analysis capabilities of test data from any data acquisition device –Allow any networked workstation to access this data Produce one integrated file with data from all channels regardless of what data acquisition system was used to collect them –Have all test data immediately available over network for researchers after the test concludes Reduce the occurrence of human error leading to loss of non-reproducible experimental data

3. 8/1/2005SEESL - University at Buffalo3 Development Develop a software program to control any data acquisition device –Provide a common user interface –Only require a networked workstation Addition drivers for DAQ devices may be needed Interface major data acquisition systems in the lab to this software

4. 8/1/2005SEESL - University at Buffalo4 Scope of Work Develop a generic interface for data acquisition system Develop a module for each data acquisition system to implement this interface Build a GUI to configure and control these data acquisition devices through this interface

5. 8/1/2005SEESL - University at Buffalo5 Software Components

6. 8/1/2005SEESL - University at Buffalo6 MetaDAQ This is the META data acquisition program that will control all the others It will be a GUI application with three major tasks –Discover devices and configure them –Control the acquisition –Archive and preview the data Each data acquisition device will be accessed through a standard interface –There will be standard dialogs for configuration, control, and data viewing/archiving –A device can extend or override these dialogs for device specific configuration

7. 8/1/2005SEESL - University at Buffalo7 Pacific 6000 Interface Use the Pacific CMD DLL –A library for interfacing with the device –Provides common configuration dialogs that will be reused –Control and data handling will be fully integrated at the application level and use the common UI elements Networking will be transparent with the use of the GPIB-ENET interface

8. 8/1/2005SEESL - University at Buffalo8 Krypton K600 Interface DMM Online system for accessing the Krypton over the network –Use the Geoloc software as a standalone application for device configuration –Load this configuration into the interface –Control and data handling will be fully integrated at the application level and use the common UI elements

9. 8/1/2005SEESL - University at Buffalo9 DVR Interface Extend the current DVR software to be accessible over the network –Provide full integration of configuration and control –Data archiving and streaming may be handled locally on the device because of the huge bandwidth requirements Low resolution previews may be implemented

10. 8/1/2005SEESL - University at Buffalo10 Implementation Schedule Complete Design Implement General DAQ interface Interface Pacific Interface Krypton Interface and extend DVR Develop GUI Test System 1 week 1 weeks 2 weeks 1 week Total Time 3 months

11. 8/1/2005SEESL - University at Buffalo11 Work Distribution Jason –Design –DAQ Interface –Pacific –Krypton –Testing Goran –DVR –GUI –Testing Total Time: 2 months

12. 8/1/2005SEESL - University at Buffalo12 Work Plan and Needs Start development the beginning of August and complete by the beginning of October Will need access to DAQ systems during development –In between tests in the lab Use in real lab test as soon as possible to catch bugs and validate operation