Presentation is loading. Please wait.

Presentation is loading. Please wait.

P LATE -T YPE D IVERTOR 3D P RINTING X.R. Wang D. Navaei ARIES-Pathways Project Meeting Gaithersburg, MD May 31-June 1, 2012.

Published byRosamund Anthony Modified over 8 years ago

Similar presentations

Presentation on theme: "P LATE -T YPE D IVERTOR 3D P RINTING X.R. Wang D. Navaei ARIES-Pathways Project Meeting Gaithersburg, MD May 31-June 1, 2012."— Presentation transcript:

1 P LATE -T YPE D IVERTOR 3D P RINTING X.R. Wang D. Navaei ARIES-Pathways Project Meeting Gaithersburg, MD May 31-June 1, 2012

2 H E - COOLED W P LATE -T YPE D IVERTOR C ONCEPT Plate size: 20 cm (tor.)x 100 cm(pol.) Impinging-jet cooling Allowable heat flux ~9 MW/m 2 ~750 plate units for a power plant like the ARIES-AT(~0.55 million finger unit) Design features: (the poloidal length is not scaled) ODS-steel cartridge W front plate W side plates 700 ͦ C 10 MPa He 800 ͦ C He rad. tor. pol. rad. W back plate

3 F ABRICATION Brazing the front, side and back plates together to form 9 identical channels Brazing the transition joints and sliding the cartridges into the channels Exploded view of the plate-type divertor ½ of the plate 50 cm 20 cm

4 P RINTED M ODULES  Only one cartridge has been printed this time, and need 8 cartridges more.  Printing time: ~51 hours  Material cost:~$250  3D printer cost: $25 per hour (for ucsd rate) x 51 hours=~$1275 (free for us ) Side and back plate Front plate Transition joints 3D printing assembly Cartridge Printing scale: ½ of ~20 cm (tor.) x 50 cm (pol.) plate 25 cm 10 cm 12.5 cm 25 cm 10 cm

Download ppt "P LATE -T YPE D IVERTOR 3D P RINTING X.R. Wang D. Navaei ARIES-Pathways Project Meeting Gaithersburg, MD May 31-June 1, 2012."

Similar presentations

P OSSIBILITY OF THE H E -C OOLED S I C-C OMPOSITE D IVERTOR X.R. Wang 1, S. Malang 2, M. S. Tillack 1 1 University of California, San Diego, CA 2 Fusion.

P OSSIBILITY OF THE H E -C OOLED S I C-C OMPOSITE D IVERTOR X.R. Wang 1, S. Malang 2, M. S. Tillack 1 1 University of California, San Diego, CA 2 Fusion.
Ss Hefei, China July 19, 2011 Nuclear, Plasma, and Radiological Engineering Center for Plasma-Material Interactions Contact: Flowing.

Ss Hefei, China July 19, 2011 Nuclear, Plasma, and Radiological Engineering Center for Plasma-Material Interactions Contact: Flowing.
Prisms A prism is a solid that is the same shape all the way a long its length.

Prisms A prism is a solid that is the same shape all the way a long its length.
Brazing By: Aubrey Lewis. Brazing  method of joining metals  uses heat and a filler  similar to soldering.

Brazing By: Aubrey Lewis. Brazing  method of joining metals  uses heat and a filler  similar to soldering.
CFD and Thermal Stress Analysis of Helium-Cooled Divertor Concepts Presented by: X.R. Wang Contributors: R. Raffray and S. Malang University of California,

CFD and Thermal Stress Analysis of Helium-Cooled Divertor Concepts Presented by: X.R. Wang Contributors: R. Raffray and S. Malang University of California,
High Performance Divertor Target Plate, a Combination of Plate and Finger Concepts S. Malang, X.R. Wang ARIES-Pathway Meeting Georgia Institute of Technology,

High Performance Divertor Target Plate, a Combination of Plate and Finger Concepts S. Malang, X.R. Wang ARIES-Pathway Meeting Georgia Institute of Technology,
Page 1 of 15 Tungsten Structures for High Heat Flux Components: Opportunities & Challenges M. S. Tillack and the ARIES Team Japan-US Workshop on Fusion.

Page 1 of 15 Tungsten Structures for High Heat Flux Components: Opportunities & Challenges M. S. Tillack and the ARIES Team Japan-US Workshop on Fusion.
U PDATES ON D ESIGN AND A NALYSES OF THE P LATE -T YPE D IVERTOR X.R. Wang 1, S. Malang 2, M. S. Tillack 1 1 University of California, San Diego, CA 2.

U PDATES ON D ESIGN AND A NALYSES OF THE P LATE -T YPE D IVERTOR X.R. Wang 1, S. Malang 2, M. S. Tillack 1 1 University of California, San Diego, CA 2.
D ESIGN I MPROVEMENTS OF THE W-B ASED D IVERTOR C ONCEPTS X.R. Wang 1, S. Malang 2, M. S. Tillack 1, J. Burke 1 University of California, San Diego, CA.

D ESIGN I MPROVEMENTS OF THE W-B ASED D IVERTOR C ONCEPTS X.R. Wang 1, S. Malang 2, M. S. Tillack 1, J. Burke 1 University of California, San Diego, CA.
Page 1 of 14 External Transition Joints for Tungsten Divertors D. Navaei, X. R. Wang, M. S. Tillack and the ARIES Team Japan-US Workshop on Fusion Power.

Page 1 of 14 External Transition Joints for Tungsten Divertors D. Navaei, X. R. Wang, M. S. Tillack and the ARIES Team Japan-US Workshop on Fusion Power.
October 16-19, 2000 A. R. Raffray, et al., ARIES-AT Blanket and Divertor, ANS Top. Meet. On TOFE 2000 1 ARIES-AT Blanket and Divertor A. R. Raffray 1,

October 16-19, 2000 A. R. Raffray, et al., ARIES-AT Blanket and Divertor, ANS Top. Meet. On TOFE ARIES-AT Blanket and Divertor A. R. Raffray 1,
Exploring Capability to Calculate Heat Loads on Divertors and Walls T.K. Mau UC-San Diego ARIES Pathways Project Meeting September 6-7, 2007 Idaho Falls,

Exploring Capability to Calculate Heat Loads on Divertors and Walls T.K. Mau UC-San Diego ARIES Pathways Project Meeting September 6-7, 2007 Idaho Falls,
P ROGRESS ON THE O VERALL P OWER C ORE C ONFIGURATION OF THE ARIES-ACT X.R. Wang 1, M. S. Tillack 1, S. Malang 2 1 University of California, San Diego,

P ROGRESS ON THE O VERALL P OWER C ORE C ONFIGURATION OF THE ARIES-ACT X.R. Wang 1, M. S. Tillack 1, S. Malang 2 1 University of California, San Diego,
1 Lane Carlson, Xueren Wang ARIES Pathways Project Meeting Gaithersburg, MD, Oct 13-14, 2011 3D Divertor Model.

1 Lane Carlson, Xueren Wang ARIES Pathways Project Meeting Gaithersburg, MD, Oct 13-14, D Divertor Model.
June 14-15, 2006/ARR 1 ARIES-CS Power Core Engineering: Updating Power Flow, Blanket and Divertor Parameters for New Reference Case (R = 7.75 m, P fusion.

June 14-15, 2006/ARR 1 ARIES-CS Power Core Engineering: Updating Power Flow, Blanket and Divertor Parameters for New Reference Case (R = 7.75 m, P fusion.
Experimental Validation of Thermal Performance of Gas-Cooled Divertors By S. Abdel-Khalik, M. Yoda, L. Crosatti, E. Gayton, and D. Sadowski International.

Experimental Validation of Thermal Performance of Gas-Cooled Divertors By S. Abdel-Khalik, M. Yoda, L. Crosatti, E. Gayton, and D. Sadowski International.
Japan considerations on design and qualification of PFC's for near term machines (ITER) Satoshi Suzuki 1, Satoshi Konishi 2 1 Japan Atomic Energy Agency.

Japan considerations on design and qualification of PFC's for near term machines (ITER) Satoshi Suzuki 1, Satoshi Konishi 2 1 Japan Atomic Energy Agency.
June19-21, 2000Finalizing the ARIES-AT Blanket and Divertor Designs, ARIES Project Meeting/ARR ARIES-AT Blanket and Divertor Design (The Final Stretch)

June19-21, 2000Finalizing the ARIES-AT Blanket and Divertor Designs, ARIES Project Meeting/ARR ARIES-AT Blanket and Divertor Design (The Final Stretch)
Status of the ARIES-CS Power Core Configuration and Maintenance Presented by X.R. Wang Contributors: S. Malang, A.R. Raffray ARIES Meeting PPPL, NJ Sept.

Status of the ARIES-CS Power Core Configuration and Maintenance Presented by X.R. Wang Contributors: S. Malang, A.R. Raffray ARIES Meeting PPPL, NJ Sept.
Forschungszentrum Karlsruhe in der Helmholtz-Gemeinschaft 02/24/2005 T. Ihli PL FUSION FZK - EURATOM ASSOCIATION 1 He-cooled Divertor Development in the.

Forschungszentrum Karlsruhe in der Helmholtz-Gemeinschaft 02/24/2005 T. Ihli PL FUSION FZK - EURATOM ASSOCIATION 1 He-cooled Divertor Development in the.

Similar presentations

Ads by Google