1. Unified Parallel C Kathy Yelick EECS, U.C. Berkeley and NERSC/LBNL NERSC Team: Dan Bonachea, Jason Duell, Paul Hargrove, Parry Husbands, Costin Iancu, Mike Welcome, Christian Bell

2. Outline Global Address Space Languages in General –Programming models Overview of Unified Parallel C (UPC) –Programmability advantage –Performance opportunity Status –Next step Related projects

3. Programming Model 1: Shared Memory Program is a collection of threads of control. –Many languages allow threads to be created dynamically, Each thread has a set of private variables, e.g. local variables on the stack. Collectively with a set of shared variables, e.g., static variables, shared common blocks, global heap. –Threads communicate implicitly by writing/reading shared variables. –Threads coordinate using synchronization operations on shared variables Pn P1 P0... x =... y =..x... Shared Private

4. Programming Model 2: Message Passing Program consists of a collection of named processes. –Usually fixed at program startup time –Thread of control plus local address space -- NO shared data. –Logically shared data is partitioned over local processes. Processes communicate by explicit send/receive pairs –Coordination is implicit in every communication event. –MPI is the most common example Pn P1 P0... send P0,X recv Pn,Y X Y

5. Tradeoffs Between the Models Shared memory +Programming is easier Can build large shared data structures –Machines don’t scale SMPs typically < 16 processors (Sun, DEC, Intel, IBM) Distributed shared memory < 128 (SGI) –Performance is hard to predict and control Message passing +Machines easier to build from commodity parts –Can scale (given sufficient network) –Programming is harder Distributed data structures only in the programmers mind Tedious packing/unpacking of irregular data structures

6. Global Address Space Programming Intermediate point between message passing and shared memory Program consists of a collection of processes. –Fixed at program startup time, like MPI Local and shared data, as in shared memory model –But, shared data is partitioned over local processes –Remote data stays remote on distributed memory machines –Processes communicate by reads/writes to shared variables Examples are UPC, Titanium, CAF, Split-C Note: These are not data-parallel languages –heroic compilers not required

7. GAS Languages on Clusters of SMPs Cluster of SMPs (CLUMPs)hb –IBM SP: 16-way SMP nodes –Berkeley Millennium: 2-way and 4-way nodes What is an appropriate programming model? –Use message passing throughout Most common model Unnecessary packing/unpacking overhead –Hybrid models Write 2 parallel programs (MPI + OpenMP or Threads) –Global address space Only adds test (on/off node) before local read/write

8. Support for GAS Languages Unified Parallel C (UPC) –Funded by the NSA –Compaq compiler for Alpha/Quadrics –HP, Sun and Cray compilers under development –Gcc-based compiler for SGI (Intrepid) –Gcc-based compiler (SRC) for Cray T3E –MTU and Compaq effort for MPI-based compiler –LBNL compiler based on Open64 Co-Array Fortran (CAF) –Cray compiler –Rice and UMN effort based on Open64 SPMD Java (Titanium) –UCB compiler available for most machines

9. Parallelism Model in UPC UPC uses an SPMD model of parallelism –A set if THREADS threads working independently Two compilation models –THREADS may be fixed at compile time or –Dynamically set at program startup time MYTHREAD specifies thread index (0..THREADS-1) Basic synchronization mechanisms –Barriers (normal and split-phase), locks What UPC does not do automatically: –Determine data layout –Load balance – move computations –Caching – move data These are intentionally left to the programmer

10. UPC Pointers Pointers may point to shared or private variables Same syntax for use, just add qualifier shared int *sp; int *lp; sp is a pointer to an integer residing in the shared memory space. sp is called a shared pointer (somewhat sloppy). Shared Global address space x: 3 Private sp: lp:

11. Shared Arrays in UPC Shared array elements are spread across the threads shared int x[THREADS] /*One element per thread */ shared int y[3][THREADS] /* 3 elements per thread */ shared int z[3*THREADS] /* 3 elements per thread, cyclic */ In the pictures below –Assume THREADS = 4 –Elements with affinity to processor 0 are red x y blocked z cyclic Of course, this is really a 2D array

12. Overlapping Communication in UPC Programs with fine-grained communication require overlap for performance UPC compiler does this automatically for “relaxed” accesses. –Accesses may be designated as strict, relaxed, or unqualified (the default). –There are several ways of designating the ordering type. A type qualifier, strict or relaxed can be used to affect all variables of that type. Labels strict or relaxed can be used to control the accesses within a statement. strict : { x = y ; z = y+1; } A strict or relaxed cast can be used to override the current label or type qualifier.

13. Performance of UPC Reason why UPC may be slower than MPI –Shared array indexing is expensive –Small messages encouraged by model Reasons why UPC may be faster than MPI –MPI encourages synchrony –Buffering required for many MPI calls Remote read/write of a single word may require very little overhead Cray t3e, Quadrics interconnect (next version) Assuming overlapped communication, the real issues is overhead: how much time does it take to issue a remote read/write?

14. UPC vs. MPI: Sparse MatVec Multiply Short term goal: –Evaluate language and compilers using small applications Longer term, identify large application Show advantage of t3e network model and UPC Performance on Compaq machine worse: -Serial code -Communication performance -New compiler just released

15. UPC versus MPI for Edge detection a. Execution time b. Scalability Performance from Cray T3E Benchmark developed by El Ghazawi’s group at GWU

16. UPC versus MPI for Matrix Multiplication a. Execution time b. Scalability Performance from Cray T3E Benchmark developed by El Ghazawi’s group at GWU

17. Implementing UPC UPC extensions to C are small –< 1 person-year to implement in existing compiler Simplest approach –Reads and writes of shared pointers become small message puts/gets –UPC has “relaxed” keyword for nonblocking communication –Small message performance is key Advanced optimizations include conversions to bulk communication by either –Application programmer –Compiler

18. Overview of NERSC Compiler 1)Compiler –Portable compiler infrastructure (UPC->C) –Explore optimizations: communication, shared pointers –Based on Open64: plan to release sources 2)Runtime systems for multiple compilers –Allow use by other languages (Titanium and CAF) –And in other UPC compilers, e.g., Intrepid –Performance of small message put/get are key –Designed to be easily ported, then tuned –Also designed for low overhead (macros, inline functions)

19. Compiler and Runtime Status Basic parsing and type-checking complete Generates code for small serial kernels –Still testing and debugging –Needs runtime for complete testing UPC runtime layer –Initial implementation should be done this month –Based on processes (not threads) on GASNet GASNet –Initial specification complete –Reference implementation done on MPI –Working on Quadrics and IBM (LAPI…)

20. Benchmarks for GAS Languages EEL – End to end latency or time spent sending a short message between two processes. BW – Large message network bandwidth Parameters of the LogP Model –L – “Latency”or time spent on the network During this time, processor can be doing other work –O – “Overhead” or processor busy time on the sending or receiving side. During this time, processor cannot be doing other work We distinguish between “send” and “recv” overhead –G – “gap” the rate at which messages can be pushed onto the network. –P – the number of processors

21. LogP Parameters: Overhead & Latency Non-overlapping overhead Send and recv overhead can overlap P0 P1 o send L o recv P0 P1 o send o recv EEL = o send + L + o recv EEL = f(o send, L, o recv )

22. Benchmarks Designed to measure the network parameters –Also provide: gap as function of queue depth –Measured for “best case” in general Implemented once in MPI –For portability and comparison to target specific layer Implemented again in target specific communication layer: –LAPI –ELAN –GM –SHMEM –VIPL

23. Results: EEL and Overhead

24. Results: Gap and Overhead

25. Send Overhead Over Time Overhead has not improved significantly; T3D was best –Lack of integration; lack of attention in software

26. Summary Global address space languages offer alternative to MPI for large machines –Easier to use: shared data structures –Recover users left behind on shared memory? –Performance tuning still possible Implementation –Small compiler effort given lightweight communication –Portable communication layer: GASNet –Difficulty with small message performance on IBM SP platform