1. CCNA 1 v3.0 Module 7 Ethernet Technologies

2. Purpose of This PowerPoint This PowerPoint primarily consists of the Target Indicators (TIs) of this module in CCNA version 3.0. It was created to give instructors a PowerPoint to take and modify as their own. This PowerPoint is: NOT a study guide for the module final assessment. NOT a study guide for the CCNA certification exam. Please report any mistakes you find in this PowerPoint by using the Academy Connection Help link.

3. To Locate Instructional Resource Materials on Academy Connection: Go to the Community FTP Center to locate materials created by the instructor community Go to the Tools section Go to the Alpha Preview section Go to the Community link under Resources See the resources available on the Class home page for classes you are offering Search http://www.cisco.comhttp://www.cisco.com Contact your parent academy!

4. Objectives 10-Mbps and 100-Mbps Ethernet Gigabit and 10-Gigabit Ethernet

5. Types of Ethernet

6. Parameters for 10 Mbps Ethernet Operation

7. 10BASE5 Architecture Example

8. 10BASE2 Network Design Limits

9. 10BASE-T Modular Jack Pinouts

10. 10BASE-T Repeated Network Design Limits

11. Parameters for 100-Mbps Ethernet Operation

12. 100BASE-TX Modular Jack Pinout

13. 1000BASE-FX Pinout

14. Example of Architecture Configuration and Cable Distances

15. Parameters for Gigabit Ethernet Operation

16. Outbound (Tx) 1000Base-T Signal

17. 1000BASE-SX and LX

18. Gigabit Ethernet Media Comparison

19. Gigabit Ethernet Architecture Maximum 1000BASE-SX Cable Distances Maximum 1000BASE-LX Cable Distances

20. Parameters for 10-Gbps Ethernet Operation

21. 10-Gigabit Ethernet Implementations

22. Future of Ethernet The Expanding Scope of Ethernet