1. Jewelry box By: Byran Tavon Lee PLTW Mr. Yates January 9, 2009

2. Introduction The purpose of this particular project was to challenge our engineering abilities to build a presentable Jewelry Box. The purpose of this particular project was to challenge our engineering abilities to build a presentable Jewelry Box. This jewelry box had to be made of 2 machinable wax with a dimension of 3 by 2 by.75. This jewelry box had to be made of 2 machinable wax with a dimension of 3 by 2 by.75. This jewelry box first had to be designed on inventor and transferred to EdgeCam to receive its G&M codes. This jewelry box first had to be designed on inventor and transferred to EdgeCam to receive its G&M codes. Finally we used the G&M codes to cut the block out on the CNC machine. Finally we used the G&M codes to cut the block out on the CNC machine.

3. Jewelry Box Top Projected View

4. Jewelry Box Bottom Projected View

5. EdgeCam Top

6. EdgeCam Bottom

7. CNC Base Top

8. CNC Base Bottom

9. Top and Bottom

10. Conclusion With this project I learned how to use inventor and EdgeCam together to design different things. My project didn’t really solve the problem presented. I say this because my project wasn’t that good looking. The one thing I done well on this project was my design on inventor. The one thing I could have done better was with the EgdeCam process. The one thing I would do different with this project is my design.