Presentation is loading. Please wait.

Presentation is loading. Please wait.

Mining and Mineral Resources. B. Describe the different types of mining and associated processes a. First step: Find an ore deposit! Companies use instruments.

Similar presentations


Presentation on theme: "Mining and Mineral Resources. B. Describe the different types of mining and associated processes a. First step: Find an ore deposit! Companies use instruments."— Presentation transcript:

1 Mining and Mineral Resources

2 B. Describe the different types of mining and associated processes a. First step: Find an ore deposit! Companies use instruments that measure gravity, magnetism, and radioactivity and pictures from satellites and planes b.Next: Take samples c.Determine how much ore is present d. Open a mine ?? A mineral deposit must have 100 to 1000 times the concentration of the mineral than ordinary rocks do to be feasible to mine!

3 Surface mining Main Types of Surface Mining –Strip Mining Removal of large strips of overlying rock and soil to reveal coal. –Open-Pit Mining Removal of rock and soil creating a vast pit where coal can be extracted. –Mountaintop Removal Mining Removal of mountain tops with explosives. Land made flat after reclamation. –Highwall Mining A continuous miner cuts holes horizontally into the coal formation.

4 1. Room-and-pillar mining. Gigantic areas are excavated and small areas remain untouched to hold up the ceiling

5 2. Longwall Mining In this type of mining, a machine moves along the face of rock and shears off the stone onto a conveyer Hydraulic arms hold up the ceiling until the machine moves forward then the ceiling collapses

6 3. Solution Mining Hot water is used to dissolve the ores and bubbles lift it to the surface

7 B3. Describe three methods of surface mining 1. Strip mining This mining occurs when the ore is near the surface and layers of rock covering it, called overburden, can be stripped away by machines

8 2. Quarrying Method of cutting larger sections of rock out of the ground Granite, limestone, and marble

9 3. Solar Evaporation This is done by placing seawater into enormous shallow ponds, the sun then evaporates the water and leaves the sodium chloride behind.

10 B4. Define placer deposit, and explain how placer deposits form. Placer deposits are minerals concentrated by wind and water into surface locations Areas of the river where the current slows collect more dense minerals like gold and silver

11 Where does the coal go after it leaves the mine? The coal is shipped by train or barge to its destination. The coal may be refined before shipping –Washing with water or a chemical bath to remove some impurities When the coal arrives at the power plant, it is pulverized into a heavy powder that is suitable for burning.

12 How is coal used at a power plant?

13 B5. Describe the steps that take place in smelting an ore. 1.The ore is mined and then melted at a smelter~ 1000-3000 degrees in furnaces 2.A material called flux is added which bonds to the useless minerals (slag) and floats to the surface 3.The valuable mineral sinks to the bottom and then poured off and cooled to form ingots pollution

14 C. Describe the environmental impacts of mining and what we can do to change them. 1. Air and Noise Pollution

15 2. Water Pollution Acid mine drainage Can kill fish, other aquatic animals and plants for hundreds of miles downstream

16 3. Displacement of wildlife Mining, especially open-pit, disrupts huge areas of land 4. Erosion and sedimentation Large piles of excess rock called tailings litter large areas near the mine Some tailing piles are so large that they fill valleys!!

17 5. Soil degradation Soil removed by the mining process is often damaged and not used in the reclaiming process. The reclaiming process returns the land to nearly its original condition once mining has ceased

18 6. Subsidence This collapsing occurs at ground level when the tunnels or rooms below ground cave in and the layers of rock above collapse into the vacated space

19 7. Underground mine fires Usually in coal mines or seams, coal catches fire from lightning or chemical reactions. These may burn for centuries!! Coal seams Smoke from coal seam fire Coal seam on fire

20 C2. Name four federal laws that relate to mining and reclaiming mined land Mining operations are governed by these laws: 1. Clean Water Act 2. Safe Drinking Water Act These acts protect water quality 3. Comprehensive Response Compensation and Liability Act This act prevents hazardous wastes from being released 4. Endangered Specie Act Protects endangered plants and animals

21 C3. Define the term “reclamation” Reclamation is a process that returns the land to pre-mining conditions

22 Most of the time, when the mining company is done with it, the pit is used as a landfill. A landfill is used as a dump to get rid of our garbage. When it is filled with garbage, it is covered over with layers of dirt. After the garbage rots a long time, the land can be used again. Some times the crater is filled with water – a lake is born.

23 C4. Describe two ways in which state governments regulate mining 1. States regulate mining through a permitting process 2. States assess fines for noncompliance

24


Download ppt "Mining and Mineral Resources. B. Describe the different types of mining and associated processes a. First step: Find an ore deposit! Companies use instruments."

Similar presentations


Ads by Google