Presentation is loading. Please wait.

Presentation is loading. Please wait.

Benefits of the New Reference Frames Dru Smith Joe Evjen 60 minutes April 13, 20152015 Geospatial Summit1.

Similar presentations


Presentation on theme: "Benefits of the New Reference Frames Dru Smith Joe Evjen 60 minutes April 13, 20152015 Geospatial Summit1."— Presentation transcript:

1 Benefits of the New Reference Frames Dru Smith Joe Evjen 60 minutes April 13, 20152015 Geospatial Summit1

2 Outline Needed repairs Benefits of new frames: – Repairs – Improvements April 13, 20152015 Geospatial Summit2

3 What is a repair? A fix to something in the current system that is currently causing NGS to: – Fail to provide heights, or – Provide inaccurate heights, or – Put undue burden on users, or – Waste resources April 13, 20152015 Geospatial Summit3

4 What is an improvement? A change to something in the current system that by itself is not causing significant problems, but whose cost/benefit ratio is worthwhile and which helps NGS to provide: – Better service and/or – Better accuracy and/or – Better sustainability and/or – Better efficiency April 13, 20152015 Geospatial Summit4

5 Needed Repairs April 13, 20152015 Geospatial Summit5

6 Needed Repairs: NAVD 88 Inherent weaknesses of passive marks – Fragility, convenience, movement – Cost-prohibitive maintenance Adjustment issues – Minimally constrained, Helmert approximation, inconsistent surface gravity surveys Sparseness Bias and Tilt – WRT GRACE/GOCE geoid models April 13, 20152015 Geospatial Summit 6

7 Needed Repairs: NAD 83 NAD83 frame ≠ GPS navigation frame NAD83 frame ≠ WAAS navigation frame NAD83 frame ≠ satellite orbits frame NAD83 frame ≠ satellite product frame NAD83 frame ≠ international geodetic frame – International flights take off & land on different datums – Many geodetic tools assume ITRF as default April 13, 20152015 Geospatial Summit7

8 map how you navigate? 1.3 2.5 3.8 5.0 6.3 meters Your GNSS frame, ITRF Your map datum, NAD 83 * As GNSS un-augmented user range error improves over time …

9

10 NAD 83(2011) to IGS08 at epoch 2022.0

11

12 NAD 83(PA11) to IGS08 at epoch 2022.0

13

14

15 Needed Repairs: Island datums (PRVD02, ASVD02, NMVD03, GUVD04, VIVD09) April 13, 20152015 Geospatial Summit15 Many of the same issues as NAVD 88 – Fragility, convenience, movement, MCA, sparseness, bias, tilt Normal orthometric heights

16 Needed Repairs: Hawaii April 13, 20152015 Geospatial Summit16 No vertical datum exists!

17 Needed Repairs: IGLD 85 Many of the same issues as NAVD 88 – They were co-defined from the same leveling and gravity data Thirty years of GIA have changed the levels of the lakes April 13, 20152015 Geospatial Summit17

18 Repairs that come with the new reference frames April 13, 20152015 Geospatial Summit18

19 Repairing NAVD 88 April 13, 20152015 Geospatial Summit19

20 Repairing NAVD 88* Problem: Fragility of bench marks Repair: In the new geopotential reference frame, orthometric heights are available to GNSS receivers without need for any bench marks April 13, 20152015 Geospatial Summit20 * and PRVD02, ASVD02, NMVD03, GUVD04, VIVD09

21 Repairing NAVD 88* Problem: Inconvenient bench mark locations Repair: In the new geopotential reference frame, orthometric heights are equally available to GNSS receivers everywhere in the USA April 13, 20152015 Geospatial Summit21 * and PRVD02, ASVD02, NMVD03, GUVD04, VIVD09

22 Repairing NAVD 88* Problem: Unchecked movement of bench marks Repair: In the new geopotential reference frame, orthometric heights at the epoch of the survey, are available to GNSS receivers because of time- dependent geoid models and time-dependent CORS positions April 13, 20152015 Geospatial Summit22 * and PRVD02, ASVD02, NMVD03, GUVD04, VIVD09

23 Repairing NAVD 88* Problem: Minimally Constrained Adjustment (absolute accuracy of heights is dependent on distance from origin) Repair: In the new geopotential reference frame, the absolute accuracy of orthometric heights will have greater consistency throughout the country. April 13, 20152015 Geospatial Summit23 * and PRVD02, ASVD02, NMVD03, GUVD04, VIVD09

24 Repairing NAVD 88 Problem: Helmert Approximation (heights rely on a first-order approximation which doesn’t propagate into accuracy statistics) Repair: In the new geopotential reference frame, approximations are being quantified and bounded and will be reflected in accuracy statistics. April 13, 20152015 Geospatial Summit24

25 Repairing NAVD 88 Problem: Inconsistent surface gravity surveys (heights rely 2 million surface gravity measurements which span decades and reflect no time dependency) Repair: In the new geopotential reference frame, the gravity field will be consistent, and epoch dependent, directly influencing the time dependent geoid and time dependent orthometric heights April 13, 20152015 Geospatial Summit25

26 Repairing NAVD 88* Problem: Sparseness (bench mark spatial distribution tends to cluster around population clusters) Repair: In the new geopotential reference frame, orthometric heights are equally available to GNSS receivers everywhere in the USA April 13, 20152015 Geospatial Summit26 * and PRVD02, ASVD02, NMVD03, GUVD04, VIVD09

27 Benefits of repairs: NAVD 88* Problem: Bias and Tilt (“zero height surface” of datum is not the geoid) Repair: In the new geopotential reference frame, the geoid will be the zero height surface, and will be built upon global satellite models April 13, 20152015 Geospatial Summit27 * and PRVD02, ASVD02, NMVD03, GUVD04, VIVD09

28 Repairing NAD 83 April 13, 20152015 Geospatial Summit28

29 Repairing NAD 83 1)Align US frame with ITRF, GPS, WAAS 2)Remove non-geocentricity 3)Move beyond cascade of NAD83 realizations 4)Better agreement across USA – Mexico border 5)Velocities everywhere, so we use similar techniques everywhere April 13, 20152015 Geospatial Summit29

30 Repairing Island datums (PRVD02, ASVD02, NMVD03, GUVD04, VIVD09) April 13, 20152015 Geospatial Summit30

31 Repairing Island datums (PRVD02, ASVD02, NMVD03, GUVD04, VIVD09) Problem: Normal Orthometric Heights (heights do not rely on actual gravity measurements) Repair: In the new geopotential reference frame, orthometric heights will be available to GNSS receivers, not normal orthometric heights April 13, 20152015 Geospatial Summit31

32 Repairing Hawaii April 13, 20152015 Geospatial Summit32

33 Repairing Hawaii Problem: No Vertical Datum (NGS has never officially defined a vertical datum for Hawaii) Repair: In the new geopotential reference frame, orthometric heights will be available to GNSS receivers in Hawaii, consistent with heights across the North American continent April 13, 20152015 Geospatial Summit33

34 Repairing IGLD 85 April 13, 20152015 Geospatial Summit34

35 Repairing IGLD 85 Problem: GIA changes aren’t reflected in IGLD 85 Repair: In the new geopotential reference frame, dynamic heights at the epoch of the survey, are available to GNSS receivers because of time- dependent geoid models, time-dependent CORS positions and time dependent gravity field models April 13, 20152015 Geospatial Summit35

36 Improvements that come with the new reference frames April 13, 20152015 Geospatial Summit36

37 Improving Heights Continental consistency In the new geopotential reference frame, heights will be consistent from pole to equator and Aleutians to Greenland. April 13, 20152015 Geospatial Summit37

38 Extent of 2022 geoid model used for new geopotential reference frame April 13, 20152015 Geospatial Summit38

39 Hawaii Many US Pacific Territories (not Guam, CNMI nor American Samoa) April 13, 20152015 Geospatial Summit39

40 April 13, 20152015 Geospatial Summit40 Canada Alaska, including entire Aleutian Island Chain CONUS (USA)

41 Mexico All Central American Countries All Caribbean Countries Bermuda April 13, 20152015 Geospatial Summit41

42 Improving Heights Time-dependent heights on passive control In the new geopotential reference frame, heights on passive control will eventually be stored at and distributed by NGS, and changes over time will be reflected as actual changes April 13, 20152015 Geospatial Summit42

43 1975 1980 1985 1990 1995 2000 2005 2010 2015 2020 2025 2030 2.000 2.050 2.100 2.150 2.200 2.250 2.300 2.350 H time Assume “H” was determined four different times: 1990: 2.100 1994: 2.110 2002: 2.190 2009: 2.180

44 1975 1980 1985 1990 1995 2000 2005 2010 2015 2020 2025 2030 2.000 2.050 2.100 2.150 2.200 2.250 2.300 2.350 H time In standard NGS procedure, a height is held fixed until replaced. So plotting the height as seen on a datasheet over time would look like this: Height unknown before first survey

45 1975 1980 1985 1990 1995 2000 2005 2010 2015 2020 2025 2030 2.000 2.050 2.100 2.150 2.200 2.250 2.300 2.350 H time This will change in the future. First, error bars will be shown. Shown here are the same values of “H”, but with error bars representing their standard deviations. 1990: 2.100 +/- 0.0375 (3.75 cm) 1994: 2.110 +/- 0.0250 (2.50 cm) 2002: 2.190 +/- 0.0200 (2.00 cm) 2009: 2.180 +/- 0.0250 (2.50 cm)

46 1975 1980 1985 1990 1995 2000 2005 2010 2015 2020 2025 2030 2.000 2.050 2.100 2.150 2.200 2.250 2.300 2.350 H time Using least squares, we could fit a line, using appropriate weights to fit to the data

47 1975 1980 1985 1990 1995 2000 2005 2010 2015 2020 2025 2030 2.000 2.050 2.100 2.150 2.200 2.250 2.300 2.350 H time Using a simple H = mt+b fitting, we get: m = 0.00505 m/y (+5.05 cm uplift per year) b(1970) = 2.004 m H = (0.00505)(t-1970) + 2.004

48 1975 1980 1985 1990 1995 2000 2005 2010 2015 2020 2025 2030 2.000 2.050 2.100 2.150 2.200 2.250 2.300 2.350 H time Now, we can find H at various time intervals.

49 1975 1980 1985 1990 1995 2000 2005 2010 2015 2020 2025 2030 2.000 2.050 2.100 2.150 2.200 2.250 2.300 2.350 H time And propagating the actual measurement error forward and backward in time, we see that there is a strong dependence on higher accuracy height estimates occurring near the actual surveys.

50 1975 1980 1985 1990 1995 2000 2005 2010 2015 2020 2025 2030 2.000 2.050 2.100 2.150 2.200 2.250 2.300 2.350 H time Compare this with current NGS procedures… Height unknown before first survey

51 1975 1980 1985 1990 1995 2000 2005 2010 2015 2020 2025 2030 2.000 2.050 2.100 2.150 2.200 2.250 2.300 2.350 H time Compare this with current NGS procedures… The only place current NGS procedures match the predicted heights 5 cm 10 cm* (*and growing)

52 Improving Dynamic Heights In the new geopotential reference frame, dynamic heights will be available from GNSS surveys, rather than just leveling surveys April 13, 20152015 Geospatial Summit52

53 Improving Clarity “All coordinates are referenced to the North American Datum of 1983 (NAD 83) which is equivalent to the World Geodetic System 1984 (WGS 84)” - U.S. Supreme Court, Dec 15, 2014 In the new geopotential reference frame, the name “NAD 83” will be gone, and issues such as this will hopefully be left behind as well. April 13, 20152015 Geospatial Summit53

54 Thank You! April 13, 20152015 Geospatial Summit54 http://www.ngs.noaa.gov/datums/newdatums/

55 Extra Slides April 13, 20152015 Geospatial Summit55

56 April 13, 20152015 Geospatial Summit56

57 April 13, 20152015 Geospatial Summit57

58 Needed Repairs: IGSN 71 Most NGS surface gravity is in IGSN 71, an international network, not under NGS control Based on pre-microGal absolute meters No maintenance April 13, 20152015 Geospatial Summit58


Download ppt "Benefits of the New Reference Frames Dru Smith Joe Evjen 60 minutes April 13, 20152015 Geospatial Summit1."

Similar presentations


Ads by Google