1. Panasonic KX-TDE With SIP Trunking
TDE SIP presentation
Notes
Specifications subject to change without notice

2. Press the Activation Key
Install Sip Card
Press the Activation Key
Install a V-SIPGW16 Card in an available slot and take the card out of service

3. Activation Key Do Not Activate this key
The Sip Trunk will use the 4-Channel IP Trunk License

4. Shelf Property-Virtual SIP Gateway
This will be the customers Static IP Address

5. Card Property- Virtual SIP Gateway
Enter the Preferred and Alternate DNS Server IP. This can be found in the CMD prompt by typing Ipconfig /all

6. Port Property- Virtual SIP Gateway
Change the first bin to Basic Channel. You may purchase up to 16 Additional Channels. The DSP16 comes with a license for 4, and the DSP comes with a license for 16. Each additional bin would be listed as Additional Channel for CH1

7. Port Property- Virtual SIP Gateway
Enter the IP Address given to you by the provider

8. Enter the Extension Number given to you by the Provider

9. Port Property- Register
Re-enter the IP Address given to you by the Provider

10. Select the Codec the Provider is using
Port Property
Select the Codec the Provider is using

11. IPCMPR Card Property
The IPCMPR Card must have the correct IP Address, Subnet Mask and Default Gateway entered

12. Place the SIP Trunks in a Trunk Group by themselves
10.1 CO Line Settings
Place the SIP Trunks in a Trunk Group by themselves

13. Change the DID setting to DIL and assign the correct Ring Group
10.2 CO DIL Table
Change the DID setting to DIL and assign the correct Ring Group