1. 11 CS716 Advanced Computer Networks By Dr. Amir Qayyum

2. 2 Lecture No. 27

3. 3 Multicast

4. 4 Internetworking Basics of internetworking (heterogeneity) –IP protocol, address resolution, control messages … Routing Global internets (scale) –Virtual geography and addresses –Hierarchical routing Future internetworking: IPv6 Multicast traffic MPLS

5. 5 Internet Multicast Outline Motivation and challenges Support strategy IP multicast service model Multicast in the Internet Routing –Review of ELAN techniques –Multicast routing Limitations

6. 6 Multicast Unicast: one destination Broadcast: all destinations Multicast: subset of destinations When is multicast useful ? –Send data to multiple receivers at once Videoconferencing, video-on-demand, telecollaboration Software update to group of customers –Limited broadcast/self-defined multicast Send question to unknown receiver Resource discovery; Distributed database

7. 7 Multicast Why not just use broadcast/unicast ? –Broadcast not supported outside of LAN –Unicast sends multiple copies across common links Multicast support –Often supported by hardware in LAN’s (as broadcast, if not multicast) –But difficult to extend in scalable manner Multicast challenges –Efficient distribution on an internetwork –Specification of recipient group (abstraction must support self-definition)

8. 8 Multicast Support Strategy IPv4 used as basis for experimental solutions –Use class D addresses (1110 ) –Demonstrated with MBone –Uses tunneling Multicast integrated into IPv6 Internet Group Management Protocol (IGMP) Several routing/forwarding schemes: –Distance-vector –Link-state –Protocol-independent

9. 9 IP Multicast Service Model Each group uses a single address –Class D addresses (1110 ) –Some are well-known, some are dynamically assigned Group membership –Members located anywhere in the Internet –Number of receivers is arbitrary –Members can join/leave dynamically –Hosts can belong to more than one group

10. 10 IP Multicast Service Model Senders simply use group address as destination –Sender need not be in group –LAN loopback needed for sender in group Multicast scope –LAN (local scope) –Administrative scope (e.g. campus), may overlap, can assign group addresses dynamically –TTL scope (no more than N hops) Scope is exposed to protocols and applications (by exposing IP TTL)

11. 11 IP Multicast Service Model Multicast reception requires membership in group –Internet Group Management Protocol (IGMP), RFC 1112 –New operations to join and leave group –LAN routers track local membership –Forwarding depends on routing scheme –Last hop typically uses LAN broadcast Packet reception same as IP unicast

12. 12 Internet Multicast Backbone - MBone Existing infrastructure for multicast in the Internet Multicast route propagation using DVMRP Problem: most IP routers do not support multicast Solution: tunneling by multicast-capable routers –Encapsulate multicast traffic in IP packets –Send to other multicast-capable routers –Recipients unpack & forward original multicast packet Passes through multicast-incapable areas of Internet

13. 13 ELAN Multicast Techniques Direct support (Ethernet) –Application subscribes to group –IP layer notifies Ethernet card to listen to packets with group address Support through broadcast (LANE) Flooding in ELANs –Each packet sent on all but incoming link –Switches must remember each packet! Spanning tree: every host gets one copy

14. 14 ELAN Multicast Techniques Spanning tree selection –Elect a leader; spanning tree is shortest path to leader (Perlman) –Distribute topology everywhere, compute in parallel (link-state) Problems with spanning trees –Bandwidth wasted for groups with few receivers; Solution: prune LAN’s with no receivers from tree –For very large ELAN’s, no single tree is efficient; Solution: define tree per group or tree per source The same solutions are used in the Internet!

15. 15 Spanning Tree Tradeoffs Tree per group or tree per source ? Per group advantage –One routing entry per group Per source advantages –More efficient distribution –Spreads load better across links –Leverage unicast routing tables

16. 16 Multicast Routing in the Internet Multicast Open Shortest Path First (MOSPF) Distance-Vector Multicast Routing Protocol (DVMRP, used in MBONE) Protocol-Independent Multicast (PIM) –Deals with scalability issues of above protocols –Dense Mode (PIM-DM) –Sparse Mode (PIM-SM)

17. 17 Multicast Routing in the Internet How do senders find receivers? –Receivers inform all senders of interest (MOSPF) –Send to all receivers; uninterested receivers prune (DVMRP, PIM-DM) –Agree on set of rendezvous points (PIM-SM) Types of distribution trees –Separate tree from each sender (DVMRP, MOSPF, PIM-DM, PIM-SM) –Tree rooted at rendezvous point (PIM-SM)

18. 18 Link State Multicast (MOSPF) Each host on a LAN –Periodically announces its group memberships, via Internet Group Management Protocol (IGMP) Extend LSP to include set of groups with members on a given LAN MOSPF routing extends OSPF –Uses Dijkstra’s algorithm –Computes shortest-path spanning tree for source- group pairs –Forward packet on local portion of tree

19. 19 Link State Multicast (MOSPF) Tree computation –Can’t precompute for all source-group pairs –Compute on demand when first packet from a source S to a group G arrives –Cache trees for active source-group pairs –Recompute when link-state changes Scalability limitations –Reasonable intra-AS scalability –But meaningless for inter-AS –Source-group pairs scale with sources (needs to be hierarchical)

20. 20 Distance Vector Multicast (DVMRP) Idea –Graph of directed next-hop edges to a destination S form a tree –Use reverse edges to broadcast from S Implementation (Reverse Path Broadcast, or RPB) –Forward multicast packet on all links –If and only if packet came from next hop for packet source Avoid repetition on LAN’s –Assign parent router for each LAN –Has shortest path to source, ties broken by ID –Track parenthood via vector exchanges

21. 21 RPB and RPM M M M M M M M M Member of multicast group G Unicast route to S RPB from S RPM from S to G Pruned G S S

22. 22 RPB to RPM (reverse path multicast) Identify leaf networks –Only one router on network –Thus no distance packets received on interface Prune leaf networks –Without hosts in a group –Hosts must self-identify using IGMP Forward pruning information –Extend distance vector with group information –Forward packets only to interested parties –Only when multicast source active

23. 23 Distance Vector Multicast RPM Implementation Assume that everyone is interested Respond to unwanted packets with prune requests Prune requests –Canceled by graft request –Time out periodically Need ARQ for prune or graft ?

24. 24 Distance Vector Multicast - Scalability Packets are periodically broadcast (thus guaranteed to reach all interested members) High overhead for sparse groups, consider: –Multicast group of 10 members –Scattered around the world –Packets periodically reach all routers in Internet High overhead for routers –All off-tree routers maintain pruning state –And periodically retransmit

25. 25 Protocol Independent Multicast (PIM) Approach –Define rendezvous points (RP) for each group –Need multiple RP’s to handle failures Two versions –Dense mode Explicit prune messages Shared tree –Sparse mode Explicit join messages Shared or source-specific tree

26. 26 Protocol Independent Multicast (PIM) Rendezvous points (RP) for each multicast group S S RP Specific multicast tree

27. 27 Protocol Independent Multicast Joins –Receiver: send packet to one RP –Source: send to all RP’s Tree selection –Rooted at rendezvous points –Shared for infrequent traffic –Source-specific if merited by traffic level

28. 28 Limitations on Multicast Scalability (addressed to some extent by PIM) –Explosive growth of the Internet population –Explosive growth of multicast, multimedia applications Control of network resources –Applications have different performance needs –Different resource commitments by clients and/or organizations –Different ASs provide different QoS …