1. Using Java MINISTRY OF EDUCATION & HIGHER EDUCATION COLLEGE OF SCIENCE AND TECHNOLOGY KHANYOUNIS- PALESTINE Lecture 9 & 10 Repetition Statements

2.  Essentials of Counter-Controlled Repetition  while Repetition Statement  Example: The average problem  for Repetition Statement  Example: Summing the Even Integers from 2 to 20  do...while Repetition Statement  break and continue Statements  Emank X Mezank 2 Presented & Prepared by: Mahmoud R. Alfarra

3.  A repetition statement (also called a looping statement or a loop) allows the programmer to specify that a program should repeat an action while some condition remains true. 3 Presented & Prepared by: Mahmoud R. Alfarra What is repetition statement ? While there are more items on my shopping list Purchase next item and cross it off my list

4.  Counter-controlled repetition requires: 1. A control variable (or loop counter) 2. The initial value of the control variable 3. The increment (or decrement) by which the control variable is modified each time through the loop (also known as each iteration of the loop) 4. The loop-continuation condition that determines whether looping should continue. 4 Presented & Prepared by: Mahmoud R. Alfarra Essentials of Counter-Controlled Repetition

5.  A program can test multiple cases by placing if...else statements inside other if...else statements to create nested if...else statements. 5 Presented & Prepared by: Mahmoud R. Alfarra While Repetition Statement int x = number; while (Condition) { // actions x--; } int x = number; while (Condition) { // actions x--; } Initial variable The loop-continuation condition, Can be any other operators Has a close relation with the operators and the initial value of x

6. 6 Presented & Prepared by: Mahmoud R. Alfarra Be care Not providing, in the body of a while statement, an action that eventually causes the condition in the while to become false normally results in a logic error called an infinite loop, in which the loop never terminates. Set a semi colon after the condition results a logic error

7. 7 Presented & Prepared by: Mahmoud R. Alfarra While Repetition Statement true false Actions Condition Start End  The while loop is used when you want to test a condition before entering into the loop.  The while loop is considered a pretest loop, this allows you to stop entering the loop even once if the condition is not true.

8.  A class of ten students took a quiz. The grades (integers in the range 0 to 100) for this quiz are available to you. Determine the class average on the quiz. 8 Presented & Prepared by: Mahmoud R. Alfarra Example: The average problem Write the pseudo code and flowchart of the above example HW 8.1

9. 9 Presented & Prepared by: Mahmoud R. Alfarra Example: The average problem

10.  If you want to execute a certain block of code a specified number of times, use a for loop.  The syntax of the for loop is as follows: 10 Presented & Prepared by: Mahmoud R. Alfarra for Repetition Statement

11. Presented & Prepared by: Mahmoud R. Alfarra11 How to perform repetition using for ? System.out.println (counter * 10); System.out.println (counter * 10);

12. 12 Presented & Prepared by: Mahmoud R. Alfarra Be care Using an incorrect relational operator or an incorrect final value of a loop counter in the loop-continuation condition of a repetition statement can cause an off-by-one error. Using commas instead of the two required semicolons in a for header is a syntax error. When a for statement's control variable is declared in the initialization section of the for's header, using the control variable after the for's body is a compilation error. Placing a semicolon immediately to the right of the right parenthesis of a for header makes that for's body an empty statement. This is normally a logic error.

13.  Use a for statement to sum the even integers from 2 to 20 and store the result in an int variable called total. 13 Presented & Prepared by: Mahmoud R. Alfarra Example: Summing the Even Integers Write the pseudo code and flowchart of the above example HW 8.2

14. 14 Presented & Prepared by: Mahmoud R. Alfarra Example: Summing the Even Integers Not using the proper relational operator in the loop- continuation condition of a loop that counts downward (e.g., using i = 1 in a loop counting down to 1) is usually a logic error.

15. 15 Presented & Prepared by: Mahmoud R. Alfarra  A person invests $1,000 in a savings account yielding 5% interest. Assuming that all the interest is left on deposit, calculate and print the amount of money in the account at the end of each year for 10 years. Use the following formula to determine the amounts: where p is the original amount invested (i.e., the principal) r is the annual interest rate (e.g., use 0.05 for 5%) n is the number of years a is the amount on deposit at the end of the nth year. Home Work HW 8.3 a = p(1+r) n

16.  If you would prefer that the testing of the loop condition is done after executing the loop’s code, you would use the post-test version of the while loop, called the do … while loop. 16 Presented & Prepared by: Mahmoud R. Alfarra do...while Repetition Statement Using do.. While statement, the body always executes at least once, but using while statement does not.

17. 17 Presented & Prepared by: Mahmoud R. Alfarra do...while Repetition Statement int x = number; do { // actions x--; } while (Condition) int x = number; do { // actions x--; } while (Condition) Initial variable The loop-continuation condition, Can be any other operators Has a close relation with the operators and the initial value of x

18. 18 Presented & Prepared by: Mahmoud R. Alfarra do...while Repetition Statement true false Actions Condition Start End

19. 19 Presented & Prepared by: Mahmoud R. Alfarra What is the difference between them ?  a pretest condition  can be executed for 0 or more times  does not end with semicolon !!!  a pretest condition  can be executed for 0 or more times  does not end with semicolon !!!  a posttest condition  can be executed for 1 or more times  must end with semicolon !!!  a posttest condition  can be executed for 1 or more times  must end with semicolon !!! while do…while while (condition) { // actions } while (condition) { // actions } do { // actions } while (condition); do { // actions } while (condition);

20.  Java provides statements break and continue to alter the flow of control. 20 Presented & Prepared by: Mahmoud R. Alfarra break and continue Statements. break;. break; Before loop’s block After loop’s block. continue ;. continue ; Before loop’s block After loop’s block

21.  The break statement, when executed in a while, for, do...while or switch, causes immediate exit from that statement.  Execution continues with the first statement after the control statement.  Common uses of the break statement are to escape early from a loop or to skip the remainder of a switch. 21 Presented & Prepared by: Mahmoud R. Alfarra break Statement

22. 22 Presented & Prepared by: Mahmoud R. Alfarra Example: break Statement All the iterations are completed from 1 to 4 and in 5’th iteration the loop is broken

23.  The continue statement, when executed in a while, for or do...while, skips the remaining statements in the loop body and proceeds with the next iteration of the loop. 23 Presented & Prepared by: Mahmoud R. Alfarra continue Statement In while and do...while statements, the program evaluates the loop-continuation test immediately after the continue statement executes. In a for statement, the increment expression executes, then the program evaluates the loop-continuation test.

24. 24 Presented & Prepared by: Mahmoud R. Alfarra Example: continue Statement All the iterations are completed except iteration number 5

25. قال بن تيمية: الإسناد من الدين و لولا الإسناد لقال من شاء ما شاء 25 Presented & Prepared by: Mahmoud R. Alfarra

26. Practices 26 Presented & Prepared by: Mahmoud R. Alfarra