1. Task Force 3: Electrolyte leakage Last update- 01/06/2015 1

2. Scope: Issues related to electrolyte leakage (except venting) Objective : Reply all the queries on this issue, provide justification for the requirements in GTR draft and if required propose test procedure. Organization of Task force: Scope & Objective 2

3. Acceptance criteria in present GTR draft : 3 Test itemLeakageRuptureFireExplosionIsolation Resistance Retention Vibration√√√√√- Thermal shock√√√√√- Fire resistance---√-- External short circuit√√√√√- Over discharge√√√√√- Over charge√√√√√- Over temperature√√√√√- REESS- Mechanical shock√-√√√- REESS- Mechanical integrity√-√√√- Vehicle – Post Crash√-√√√√ The fire test does not require leakage criteria and hence out of scope of this TF The ‘flammability aspect’ and the ‘electric shock aspect’ of electrolyte is already covered in the GTR draft Hence the objective of the task force is to look in to the chemical risk (corrosive & toxic nature of electrolytes) In-use Crash

4. Test itemsPurpose of the testPresent Requirements : draft GTR Vibration-The user is supposed to continue to use the vehicle after the event. -In this case, stringent requirements should be applied -No evidence of electrolyte leakage Thermal shock and cycling External short circuit protection -The proposed test procedure is to confirm the operation of protective function. -In this case, stringent requirements should be applied Overcharge protection Over-discharge protection Over-temperature protection Mechanical integrity-Same as vehicle post-crash-No evidence of electrolyte leakage Mechanical shock REESS requirements for whole vehicle post-crash -The user is supposed to stop using the vehicle until certain repair/maintenance is conducted once subject to the event, presuming the battery would not be re- used for any other purpose than vehicle propulsion. -In this case, the requirement relevant to the accident situation, in order to avoid additional risk to the occupants and the surrounding people, should be applied. -Until 30 min after the impact, there shall be no electrolyte leakage from the REESS into the passenger compartment -no more than 7 % by volume of the REESS electrolyte capacity spilled from the REESS to the outside of the passenger compartment. Electrolyte Leakage: Present requirement & Purpose In-use Post-crash

5. Prepare a list of potential risks associated with existing electrolytes => discussion completed TF members agreed to distinguish the REESS in to two categories based on the types of electrolytes Aqueous electrolyte Non-aqueous electrolyte TF member agreed to distinguish in-use and post-crash requirements The discussions will be in two steps: first complete the discussion on REESS based on aqueous electrolytes (by end March) => discussion completed and then discuss the particularities of REESS with non-aqueous electrolytes. => still under discussion Approach : 5

6. Proposal : Definitions Insert the following new definitions (II. Text of Regulation ; 3. Definitions) 3.38 Electrolyte leakage: Escape of electrolyte from the REESS in the form of liquid. 3.39 Aqueous electrolyte: An aqueous electrolyte is an electrolyte based on water solvent for the compounds (e.g. acids, bases) providing conducting ions after its dissociation. 3.40 Non-aqueous electrolyte: A non-aqueous electrolyte is an electrolyte not based on water as the solvent.

7. IssuePotential RiskUpdate 1Leakage in liquid form Flammable, Toxic, Corrosive Small amounts, order of millilitres, expected Need further discussion for final draft 2Vapor from leakage Toxic / flammable gas Need further research data and field data TF3 suggestion => next slide 3Volatile gas Not expected in normal operation Discussed in Venting group 4Leakage in liquid form Flammable, Toxic, Corrosive Small amounts, order of millilitres, expected Need further discussion for final draft 5Vapor from leakage Toxic / flammable gas Need further field data and research data TF3 suggestion => next slide Non-Aqueous Electrolytes : Issues In-use Post-crash

8. Proposal : Potential risk related to non-aqueous electrolyte REESS Potential risk related to the release and evaporation of non-aqueous electrolyte and the potential formation of a toxic atmosphere was discussed in TF3. Theoretically this can be possible during in-use test as well as post-crash test. As of now, and although the topic is mentioned in various standards: UL 2580, SAE J2464, SAE J2289, SAE J2990, ISO 6469, some of which even recommend gas/analytical detection techniques, there is no clear measurement procedure suitable for all scenarios (component/vehicle level, in-use/post-crash). Even with consideration of the huge amount of electric- and hybrid vehicles that are already on the street in Europe, USA and Asia, incidents of evaporation (resulting in occupant injury) especially during in use are not documented until today. More field or research data is required to define an analytical technique suitable for detection of evaporated species from leaked electrolyte. Based on the outcome of this research, modifications to the requirements and methods with respect to leakage and evaporation of non-aqueous electrolyte may be necessary in the future. TF3 propose to precise this in the preamble of the GTR. If agreed, final wording will be provided to the secretary after the next TF3 meeting

9. Annex

10. Electrolyte Leakage: Issues raised during last EVS meeting 10  Two category of questions 1.Leakage detection: How to distinguish leakage? What is an appropriate coating? 2.Leakage (spillage) amount measurement : How is leakage measured? How to quantify electrolyte leakage amount (7 % volume or 5 litters)? How to differentiate ‘electrolyte leakage’ from ‘coolant’? How to measure the electrolyte vapor (in case required to)? Electrolyte leakage currently defined as liquid leakage. This poses possible difficulty for batteries using volatile electrolytes (e.g. Li-ion). How is liquid electrolyte leakage measured and distinguished from electrolyte lost due to vapors or evaporation of spilled electrolyte?