Presentation is loading. Please wait.

Presentation is loading. Please wait.

Introduction to Josephson Tunneling and Macroscopic Quantum Tunneling

Similar presentations


Presentation on theme: "Introduction to Josephson Tunneling and Macroscopic Quantum Tunneling"— Presentation transcript:

1 Introduction to Josephson Tunneling and Macroscopic Quantum Tunneling
Marc Manheimer November 5, 1999

2 Outline Review of Josephson Tunneling.
Derivation of tilted washboard potential. Thermal lifetime (Fulton & Dunkleberger). Macroscopic Quantum Tunneling (Voss&Webb). More recent work. November 5, 1999

3 Basic Tunnel Junction i v NIN Tunneling November 5, 1999

4 NIS Tunneling November 5, 1999

5 SIS Tunneling November 5, 1999

6 SIS Tunneling No current flows at T=0 until the gap voltage is exceeded. It takes 2D1 to break a Cooper pair, and leave it at the Fermi level, and another 2D2 to bring it to the conduction band in the second metal. (D1+D2 per electron) The tunneling current is given by: November 5, 1999

7 The Wavefunction The superconducting condensate is described by a Schrodinger equation, with wavefunction: The phase of the wavefunction plays an important role in Josephson tunneling. November 5, 1999

8 Josephson Tunneling In 1962, Josephson predicted...
A zero voltage super current: An evolving phase difference, if a voltage is maintained across a junction: Oxide barrier Metal 1 Metal 2 November 5, 1999

9 Simple Derivation… Couple two superconductors…
Separate real and imaginary… Impose a voltage between the two superconductors… We get Josephson’s relationships with: Substitute the pair density… November 5, 1999

10 November 5, 1999

11 Josephson Energy One can derive the coupling free energy stored in the junction by integrating the electrical work done by a current source in changing the phase: With a convenient reference for f: November 5, 1999

12 RSJ Model Tilted Washboard Potential I + i v Icsinq R C _
November 5, 1999

13 Tilted Washboard Potential II
The Potential November 5, 1999

14 Mechanical Analogue Tilted Washboard Potential III q G mg
November 5, 1999

15 November 5, 1999

16 November 5, 1999

17 Fulton &Dunkleberger Measured the effect of thermal noise on the lifetime of the zero voltage state. They scanned junction current, lowering the potential barrier, until the junction made the transition into the finite voltage state. The thermal lifetime is given by: The probability of switching to the finite voltage state is: November 5, 1999

18 Fulton & Dunkleberger H(K) November 5, 1999

19 November 5, 1999

20 Desired System Properties for QMT
Metastable state separted from a continuum. Two macroscopically distinguishable states. Frequency of small oscillations high enough that Barrier height variable. Experimentally describable in classical terms. November 5, 1999

21 Voss & Webb Verify thermal switching at high T
As T®0, the switching rate becomes dominated by quantum tunneling. Caldeira and Leggett fix the parameters, at T=0. November 5, 1999

22 Misc Parameters For Voss & Webb: Ic=1.6mA Ic=160nA 2x1011sec-1
3.2x10-3eV ~35K 3.2x10-4eV ~3.5K For Fulton & Dunkleberger: November 5, 1999

23 Voss & Webb An interesting aside, is that V&W write the barrier as:
Also, V&W determined x=I/Ic by fitting to the exponential. November 5, 1999

24 Voss & Webb w/o zero point subtraction Incl zero point subtraction
November 5, 1999

25 Voss & Webb November 5, 1999

26 Note: Curves change with T in MQT regime, as Ic continues to change.
November 5, 1999

27 November 5, 1999

28 November 5, 1999

29 Finite Temperature MQT
Subsequnt to V&W, several groups developed a finite T model. MQT increases with T. Washburn, Webb, Voss & Faris, published a follow-on which verifies predictions. PRL54, p2712 (1985). Groups at Berkeley and SUNY/SB also verified predictions. November 5, 1999

30 WWV&F November 5, 1999

31 WWV&F November 5, 1999


Download ppt "Introduction to Josephson Tunneling and Macroscopic Quantum Tunneling"

Similar presentations


Ads by Google