1. Multiview Drawings
Warm Ups

2. Warm Up – 3/4/14
Identify the following line types A B C D

3. Warm Up – 3/5/14
Identify the following as oblique, orthographic multiview, or isometric

4. Warm Up – 3/6/14
From the given isometric, sketch a multiview (top, front, and side). Do not dimension

5. Warm Up – 3/7/14
From the given isometric, sketch a multiview (top, front, and side). Do not dimension

6. Warm Up – 3/10/14
From the given isometric, sketch a multiview (top, front, and side). Do not dimension

7. Warm Up – 3/11/14
From the given isometric, sketch the orthographic

8. Lesson – 3/11/14 From the given orthographic, sketch the isometric 3 72 2 2

9. Warm up – 3/18/14
Identify the following as isometric, orthographic, or oblique

10. Warm up – 3/19/14
Identify the following as isometric, orthographic, or oblique

11. Warm up – 3/20/14
In a 3rd angle projection (the American way of showing a multiview), label what would go in each space

12. Warm up – 3/21/14
Sketch the front, side, and top for this isometric

13. Warm up – 3/24/14
What is the difference between related and adjacent views?
A multiview drawing is made up of ________________ projections
What is the degree measurement between the 3 axes of an isometric view?

14. Agenda – 3/24/14 Print Multiview1 in Inventor
Make up any other missing assignments
Multiview Review packet

15. Warm up – 3/25/14
What three views are most commonly used in multiviews?
Lines that are NOT parallel to the isometric axes are called ___-isometric
If you include the height on your front view, should you include it on your side view?

16. Agenda – 3/25/14 TODAY Inventor Make up any other missing assignments
Multiview Review packet
Wednesday
Finish review packet
Go over review pack
Thursday-Friday
Multiview Test

17. Warm up – 3/26/14
When you have a circular hole visible in your front view, what kind of line should form a crosshairs inside the circle?
Dimetric, Trimetric, and Isometric are all different kinds of THIS type of view
An oblique view is a specific type of this kind of axonometric view

18. Warm up – 3/27/14 What does the word “isometric” mean?
Give an example of adjacent views
Give an example of related views
If the height of your front view is 4 inches, what is the height of your side view?

19. Warm up – 3/28/14 REVIEW THIS UNIT’S WARM UPS, THEN TURN THEM IN
TURN IN ACTIVITY LOG
IF YOU HAVE FINISHED YOUR REVIEW PACKET (THAT INCLUDES #18), TURN IT IN (IF IT’S NOT FINISHED, LEAVE IN YOUR HANGING FOLDER)
CLEAR YOUR DESK. YOU ONLY NEED A PENCIL (OR PEN, JUST DON’T MESS UP)