1. vGreen: A System for Energy Efficient Manager in Virtualized Environments G. Dhiman, G Marchetti, T Rosing ISLPED 2009

2. vGreen Multi-tiered software system for energy efficient computing and management in virtualized environments. Captures power and performance characteristics of virtual machines and develops policies for energy efficient VM scheduling. Performance and system level energy savings of 20% and 15%

3. Importance Power Consumption critical – because it impacts deployment (peak power delivery) – Affects operational costs (power supply, cooling) Current work treats overall CPU utilization of PM and its VM as indicator for power consumption and resource utilization Characteristics of co located VMs causes variation in power consumption at similar CPU utilization levels.

4. Solution technique vGreen – Understand and exploit relationship between architectural characteristics of VM and its performance and power consumption. – Architectural characteristics comprise of instructions per cycle, memory access – Based on client server model – Vgserv and vgnodes

5. vgserv and vgnodes Vgserv – Centralized server – Performs management decisions like scheduling and DVFS of VMs across PMs – Places VMs across vgnodes to improve overall performance Vgnodes – Physical Machines where VMs located – Perform online characterization of the VMs running on them and updates vgserv

6. Principle and methodology Nature of workload executed in each VM determines the power profile and performance of the VM, and thereby its energy consumption. VMs with different or same characteristics co-located in same VM Characteristics refer to CPU and memory utilization Two contrasting benchmarks mcf and perl used to implement heterogeneous characteristics

7. eon and mcf mcf – High Memory Accesses per cycle (MPC) – Results in increased cache conflict rate for multiple instances – Increased execution time eon – Has high Instructions per cycle but low MPC – Results in higher utilization of CPU resource

8. Comparison of mcf and eon

9. Conclusion from results Co-scheduling VMs with similar characteristics not beneficial from energy efficiency and power consumption point of view. mcf contributes to higher system energy consumption because of its longer running time. eon contributes to power imbalance as it consumes more power Running VMs with mcf and eon on both PMs result in high performance improvement and energy savings upto 20%

10. Power Management in Virtualized

11. Hierarchical Metrics

12. Explanation vgpolicy decisions based on value of different metrics, namely MPC, IPC and utilization of different VMs These metrics received as updates from vgnodes. Metrics evaluated and updated dynamically

13. Continued… vgxen estimates aggregate metrics (vMPC, vIPC, vutil) for each VM by adding up metrics of constituent VCPU and stores it and exports it to vgpolicy through vgdom vgnode. vgdom acts as interface for vgnode to vgserv and registers vgnode with vgserv.

14. MPC balance algorithm

15. Explanation Checks if nMPC of n1 greater than threshold MPC. Return if small otherwise find VM with minimum vMPC in n1 and migrate it to vgnode with lower nMPC for better balance. But migration should not result in the nMPC of new node exceeding threshold MPC. Same procedure for IPC. Utilization is balanced to ensure no overcommitted or underutilized node exists. VM consolidation of low utilization VM to idle VM

16. DVFS Vgpolicy issues command to scale v-f setting if it is more energy efficient than VM migration. Can be required if heterogeneous VMs are absent. Exploit characteristics of workload to find v-f setting that is best suited. mcf and eon run at 90% CPU utilization levels

17. Different frequency levels

18. MPC, IPC, DVFS MPC highest priority – Memory bottleneck impacts performance and energy efficiency IPC next – Balanced power consumption, results in uniform thermal profile and decreases cooling cost. Utilization for fair distribution of workload. DVFS when no benefits obtained from VM scheduling

19. Average Weighted Speedup Average Weighted speedup T e+i = time of execution of VM i with E+ T vgreeni = time of execution of VM i with vGreen T alonei = time of execution of VM i running alone on VM i

20. Mixed vs Same VM placement

21. Weighted Speedup and Energy Savings

22. Power Consumption

23. Conclusion vGreen has negligible runtime overhead Workload characterization achieves better performance and energy efficiency Reduces power consumption variance between two vgnodes by 80%