1. Static Electricity, Electric Forces, Electric Fields, Electric Potential Energy, Electric Potential, Capacitors

2. Electric Charges Electrons have a negative charge
Protons have a positive charge
Charge is measured in “coulombs”
“q” or “Q” in an equation is used for charge
1 electron has 1.6 x C of charge

3. Static Electricity
Static Electricity is the study of “charges at rest”.
Fundamental Rule of Charge
Opposite charges attract,
Like charges repel
3 methods of charging : friction, conduction, & induction
Conductors allow electrons to move freely, Insulators do not!

4. Methods of Charging
Charging by friction scrapes electrons off one object and places them on the other (the two objects will have equal and opposite charges)
Charging by induction requires no contact. A charged object is brought near a neutral object and the charges in the neutral object become polarized (opposites attract and likes repel) so that neutral object behaves as if it is charged (but really it still has same # of + & - charges, so still neutral)
Charging by conduction requires contact. A charged object comes in contact with a neutral object and charges are transferred between objects until they both have equal charge (charge equilibrium)

5. Electrostatic Forces (F) (measured in Newtons)
Given 2 charges of magnitude q1 & q2 separated by a distance d, the magnitude of the force that each of the charges exerts on the other is calculated by the relationship given by Coulomb’s Law. The direction of the force is determined by the fundamental law of charges (i.e. attraction or repulsion). The forces must be equal and opposite … Newton’s 3rd Law! q1 q2
Coulomb’s Law: F d + - F + + q1 q2
k = 9 x 109 N*m2/C2 This is known as “Coulomb’s constant”

6. Electric Fields (E) measured in Newtons per Coulomb
Electric fields are the “energy field” that surrounds any charged particle”
Any other charge in this field will experience a force.
Electric fields are vectors (mag. & dir.)
The direction of an Electric field is defined by the direction of the force on a “+” test charge placed in that field, thus Electric fields are always in a direction that is away from “+” and toward “-”.
Electric Field strength is measured in units of N/C (newtons per coulomb)

7. Electric Field due to a Point Charge
To calculate the Electric Field strength, E, at a point “x” a distance, d, from the charge, q, creating the electric field, use the following formula... + q x d - q
Field around a Field around a
Negative charge Positive charge

8. Force on a charge due to an Electric Field
If a charge, q, is placed at point “x” in the field where the Electric Field strength is E, it will experience a force F. F E + q d + Q

9. Electric Potential Energy (Uelec) measured in Joules
When two charges are placed near each other, they have the potential to start moving under the influence of the force between them. If they have the “potential” to have “kinetic energy” then according to the Law of Conservation of Energy, they must have Potential Energy when they are in that arrangement. To calculate the potential energy of this arrangement of charges… q1 q2 + - d
Remember: energy of any kind is always a scalar quantity…magnitude only!

10. Electric Potential (V) measured in Volts
Electric Potential (V) is defined as the Electric Potential Energy (Uelec) per unit of charge (q) at a given point in an Electric Field.
Electric Potential (V) is a scalar quantity, so…magnitude only but may be positive or negative based on the sign of the charge creating the field.
1 volt = 1 joule per coulomb (1 V=1 J/C)
To calculate the electric potential at a point in space due to a single point charge, use…
…where Q is the charge creating the field and q is any charge that might be at the point in space of interest.

11. Equipotential Lines Equipotential lines are “lines of equal energy”
All points on each line have the same electric potential (V)
Equipotential lines are usually parallel to the surface of the charge
They do not depend on the sign of the charge
Equipotential lines, each line has a different potential (V)
For a point charge, they are concentric circles. q

12. Uniform Electric Fields
Uniform Electric fields exist when there are equal and oppositely charged plates separated by a distance, d. Each charged plate has a different value of electric potential (V1 and V2), often determined by connecting the plates to the terminals of a battery. The individual values of electric potential (V) are not important but the potential difference between the plates (ΔV) is very important. The electric fields created by each charged plate combine such that total electric field that has a constant value (E) at all regions between them. The relationship between the potential difference, V, electric field, E, and distance, d is… - + E +Q -Q d V1 V2
ΔV = V1-V2
Note: This formula is ONLY valid for uniform fields!

13. Work done moving a charge through an Electric Field (W) - measured in Joules
If a charge is moving through an electric field, it experiences a force in the direction of the field that pushes it across equipotential lines. The charge moves through a distance, d, between its starting and final points and has a different potential (V) at the beginning and end, thus ΔV. Since there is a force moving an object through a distance, work is done on the charge. The following relationships apply. q V2 V1 + - + - + - V1 V2 + - + -

14. Capacitors A device used to store charge (energy)
Made of 2 conductors separated by an insulator
Each conductor carries an equal but opposite charge, q
Releases all charge (stored energy) in one big burst…think camera flash!

15. Capacitance (C) measured in farads
Capacitance is the quantity that describes the
ability of a capacitor to store energy in the
form of electric charge.
Or…The capacitance is the capacity of the
capacitor
Capacitance depends on the amount of charge
stored on each plate and the potential
difference between the plates.
It is measured in units of Farads (F), named for
Michael Faraday (a famous Physicist).
To calculate the capacitance, C, simply find the ratio of the charge stored on a single plate, Q, and the potential difference between the plates, ΔV.
Note: 1 Farad = 1 Coulomb / Volt
Also, a Farad is a very large unit so usually use μF (10-6), nF (10-9), or pF (10-12).

16. (parallel-plate capacitor)
An example of a simple capacitor:
(parallel-plate capacitor)
2 oppositely charged plates
To get more stored charge:
increase the size of the plates
decrease the plate separation
increase the voltage of the battery - + E + -
Insulator such as air, paper, plastic, or mylar
battery