2. Inventory Skills Entering the Counts

3. What this tutorial covers—and doesn’t Inventory tasks 1. Record transfers 2. Report losses 3. Get organized 4. Print worksheet 5. Receiving 6. Count and record on worksheet 7. Enter the counts into WebSMARTT 8. Print – review – correct 9. Submit 10. Notify that you’re done. This tutorial covers only the detailed process starred below. See Inventory Step by Step for an overview of all tasks. Other detailed tutorials are available for the tasks shown in blue.

4. When to enter counts into WebSMARTT: On inventory day.

5. Before you begin... You’ll need the inventory worksheet on which you recorded the actual physical counts.

6. 1. Re-check receiving. Receiving must be complete before an inventory can be opened. To be sure you got it all, check here: See separate tutorial on Receiving if you need help with this step.

7. 2.Ask to have your inventory opened. Call 63568 or E-mail: grobert3@pps.k12.or.us.grobert3@pps.k12.or.us Allow at least ½ hour after your request before attempting to go to your inventory.

8. After your inventory has been opened... No more receiving until the inventory is complete and submitted. No more transfers until the inventory is complete and submitted. Do the steps in order.

9. 3. Click on the Inventory tab.

10. 4. Click on Physical Inventory.

11. You should see the following message: If you get a different message, it means your inventory is not yet open. Wait a few minutes, and try again.

12. 5. Click OK. Clicking OK closes the dialog box that hides part of the page. But as you can see below, there is still no place for you to enter the numbers. Continue to the next slide...

13. 6. Click Change. The Physical Inventory Entry page opens (with little boxes you can type the numbers in).

14. 7. Copy the counts from your worksheet.

15. 8. Save your work... When you are finished, or if you are interrupted, click the Confirm button (this saves your work).

16. 9. Print a copy of your work. Click the Print button. You won’t be able to print the same report after the inventory is submitted. Before submitting:

17. Printing your work, continued... Click the printer icon.

18. 10. Review carefully before submitting... Compare the worksheet with the printed report, to make sure you entered the numbers correctly. Changes cannot be made after the inventory is submitted.

19. Really??? You have 8 cases of foil pop-ups? Or did you mean 8 boxes? After submitting, changes are impossible CaseBox

20. If you need to make changes... Click the Change button. Enter the change Confirm again Print again Review again REPEAT til everything is correct. Before submitting:

21. What’s next... Submit the inventory. Notify that you have finished, according to instructions from your supervisor. See also the separate tutorial on Inventory Step-by-Step.