1. Chapter 15: Oscillations

2. COURSE THEME: NEWTON’S LAWS OF MOTION!
Chs : Methods to analyze dynamics of objects in Translational & Rotational Motion using Newton’s Laws!
Chs. 5 & 6: Newton’s Laws using Forces (translational motion)
Chs. 7 & 8: Newton’s Laws using Energy & Work (translational motion)
Ch. 9: Newton’s Laws using Momentum (translational motion)
Chs. 10 & 11: Newton’s Laws (rotational language; rotating objects).
Ch. 14: Newton’s Laws for fluids (fluid language)
NOW
Ch. 15: Methods to analyze the dynamics oscillating objects.
First, need to discuss (a small amount of) VIBRATIONAL LANGUAGE
Then, Newton’s Laws in Vibrational Language!

3. Simple Harmonic Motion
Vibration  Oscillation = back & forth motion of an object
Periodic motion: Vibration or Oscillation that regularly repeats itself. Motion of an object that regularly returns to a given position after a fixed time interval.
A special kind of periodic motion occurs in mechanical systems when the force acting on the object is proportional to the position of the object relative to some equilibrium position
If the force is always directed toward the equilibrium position, the motion is called simple harmonic motion
Simplest form of periodic motion: Mass m attached to an ideal spring, spring constant k (Hooke’s “Law”: F = -kx) moving in one dimension (x).
Contains most features of more complicated systems
 Use the mass-spring system as a prototype
for periodic oscillating systems

4. Spring-Mass System Equilibrium Position x = 0
Block of mass m attached to ideal spring of constant k. Block moves on a frictionless horizontal surface
When the spring is neither stretched nor compressed, block is at the
Equilibrium Position x = 0
Assume the force between the mass & the spring obeys “Hooke’s Law” Hooke’s Law: Fs = - kx
x is the displacement
Fs is the restoring force. Is always directed toward the equilibrium position
Therefore, it is always opposite the displacement from equilibrium

5. Block Motion (a) Block displaced right of x = 0
Possible Motion:
(a) Block displaced right of x = 0
Position x is positive (right)
Restoring force Fs to the left
(b) Block is at x = 0
Spring is neither stretched nor compressed
Force Fs is 0
(c) Block is displaced left of x = 0
Position x is negative (left)
Restoring force Fs to the right

6. Terminology & Notation
Displacement = x(t)
Velocity = v(t)
Acceleration = a(t)  Constant!!!!!!!
Constant acceleration equations from Ch. 2
DO NOT APPLY!!!!!!!!!!!
Amplitude = A (= maximum displacement)
One Cycle = One complete round trip
Period = T = Time for one round trip
Frequency = f = 1/T = # Cycles per second Measured in Hertz (Hz)
A and T are independent!!!
Angular Frequency = ω = 2πf = Measured in radians/s.

7. Repeat: Mass-spring system contains most features of more complicated systems
 Use mass-spring system as a prototype for periodic oscillating systems.
Results we get are valid for many systems besides this prototype system.
ANY vibrating system with restoring force proportional to displacement (Fs = -kx) will exhibit simple harmonic motion (SHM) and thus is a simple harmonic oscillator (SHO).
(whether or not it is a mass-spring system!)

8. Acceleration Force described by Hooke’s Law is the net force in
Newton’s 2nd Law
 The acceleration is proportional
to the block’s displacement
Direction of the acceleration
is opposite the displacement
An object moves with simple harmonic motion whenever its acceleration is proportional to its position and is oppositely directed to the displacement from equilibrium

9. The acceleration is not constant!
NOTE AGAIN!
The acceleration is not constant!
So, the kinematic equations can’t be applied!
From previous slide: - kx = max
If block is released from position
x = A, initial acceleration is – kA/m
When block passes through
equilibrium position, a = 0
Block continues to x = - A where
acceleration is + kA/m

10. Block Motion
Block continues to oscillate between –A and +A
These are turning points of the motion
The force is conservative, so we can use the appropriate potential energy U = (½)kx2
Absence of friction means the motion will continue forever!
Real systems are generally subject to friction, so they do not actually oscillate forever

11. Simple Harmonic Motion Mathematical Representation
Block will undergo simple harmonic motion model
Oscillation is along the x axis
Acceleration
Define:
Then a = -w2x. To find x(t), a function that satisfies this equation is needed
Need a function x(t) whose second derivative is the same as the original function with a negative sign and multiplied by w2
The sine and cosine functions meet these requirements

12. Simple Harmonic Motion Graphical Representation
A solution to this is
x(t) = A cos (wt + f)
A, w, f are all constants
A cosine curve can be used to give physical significance to these constants

13. Definitions w is called the angular frequency
x(t) = A cos (wt + f)
A  the amplitude of the motion
This is the maximum position of the particle in either the positive or negative direction
w is called the angular frequency
Units are rad/s
A & f: Determined by position & velocity at t = 0
If the particle is at x = A at t = 0, then f = 0
The phase of the motion is (wt + f)
x (t) is periodic and its value is the same each time wt increases by 2p radians

14. Period & Frequency
Period, T  time interval required for mass to go through one full cycle of its motion
Values of x & v for the mass at time t equal the values of x & v at t + T
Frequency, f  Inverse of period.
Number of oscillations that mass m
undergoes per unit time interval
Units: cycles per second = hertz (Hz)

15. Summary Period & Frequency
Frequency & period equations can be rewritten to solve for w. Period & frequency can also be written:
Frequency& period depend only on mass m of block & the spring constant k
They don’t depend on the parameters of motion A, v
The frequency is larger for a stiffer spring (large values of k) & decreases with increasing mass of the block

16. x(t), v(t), a(t) for Simple Harmonic Motion
Simple harmonic motion is one-dimensional& so directions can be denoted by + or – sign
Obviously, simple harmonic motion is not uniformly accelerated motion. CANNOT USE kinematic equations from earlier.

17. The acceleration is not constant! THESE ARE WRONG AND WILL GIVE
NOTE ONE MORE TIME!
The acceleration is not constant!
That is, the 1 dimensional kinematic equations for constant acceleration (from Ch. 2) DO NOT APPLY!!!!!!
THESE ARE WRONG AND WILL GIVE
YOU WRONG ANSWERS!!

18. THESE ARE WRONG AND WILL GIVE
TO EMPHASIZE THIS!
THROW THESE AWAY FOR THIS CHAPTER!!
THESE ARE WRONG AND WILL GIVE
YOU WRONG ANSWERS!!

19. Maximum Values of v & a
x(t) = Acos(wt + f)
v(t) = - wAsin(wt + f)
a(t) = - w2Acos(wt + f)
Sine & cosine functions oscillate between ±1, so we can easily find the maximum values of velocity and acceleration for an object in SHM

20. Graphs: General (b) Velocity v(t) as a function of time
The graphs show (general case)
(a) Displacement x(t) as a function of time
x(t) = Acos(wt + f)
(b) Velocity v(t) as a function of time
v(t) = - wAsin(wt + f)
(c ) Acceleration a(t) as as a function of time
a(t) = - w2Acos(wt + f)
The velocity is 90o out of phase with the displacement and the acceleration is 180o out of phase with the displacement

21. Example 1 x(0) = A; v(0) = 0 x(t) = Acos(wt + f)
v(t) = - wAsin(wt + f)
a(t) = - w2Acos(ωt + f)
Initial conditions at t = 0:
x(0) = A; v(0) = 0
This means f = 0
 x(t) = Acos(wt)
v(t) = - wAsin(wt)
Velocity reaches a maximum of
± wA at x = 0
a(t) = - w2Acos(wt)
Acceleration reaches a maximum
of ± w2A at x = A

22. Example 2 x(t) = Acos(wt + f) v(t) = - wAsin(wt + f)
a(t) = - w2Acos(ωt + f)
Initial conditions at t = 0
x(0) = 0; v(0) = vi
This means f = - p/2
 x(t) = Asin(wt)
v(t) = wAcos(wt)
a(t) = - w2Asin(wt)
The graph is shifted one-quarter cycle to the right compared to the graph of x (0) = A