Presentation is loading. Please wait.

Presentation is loading. Please wait.

Seasonal Modeling (NOAA) Jian-Wen Bao Sara Michelson Jim Wilczak Curtis Fleming Emily Piencziak.

Similar presentations


Presentation on theme: "Seasonal Modeling (NOAA) Jian-Wen Bao Sara Michelson Jim Wilczak Curtis Fleming Emily Piencziak."— Presentation transcript:

1 Seasonal Modeling (NOAA) Jian-Wen Bao Sara Michelson Jim Wilczak Curtis Fleming Emily Piencziak

2 Accomplishments Preparation of gridded data sets for the entire summer of 2000 to initialize MM5 Refinement of the FDAA data preparation: 1.Elevation of each sigma level varies with observation sites. 2.Observations are interpolated from two adjacent data levels to a given model level. 3.An anisotropic spatial influence function is being implemented and tested. Observational data preparation for model evaluation: 1.Hand editted (level 1C) winds and RASS from 25 wind profilers for 60 days (3 August – 2 October, 2000) 2.Data from 1 June – 2 August remain to be editted 3.PBL depths for entire period, all profilers, have been calculated

3 PBL Depth Estimation

4

5 36km grid 95x91 12km grid 91x91 4km grid 190x190 All have 50 layers, with 22 in lowest 1km Subregions for Model Evaluation Wind profiler sites

6 A Major Issue to Settle What is the best model configuration for the seasonal simulations? Through: Evaluation of chemical model simulations Evaluation of major transport processes Comparison of the simulations using V6 and V7 Comparison of WRF and MM5

7 Chemical Model Evaluation MM5 runs of two 5 day periods ( Jul 24- Jul 29 and Aug 3- Aug 8 2000) were completed. Analysis and comparison of the above two runs with observations have been started.

8 Comparison of the Simulated and Observed Surface Winds for the Jul-Aug Case

9 ABL Height Comparisons (Colored contours are TKE, and dots indicate the observed ABL height)

10 Observed clouds vs Model Simulation

11

12

13 Solar Radiation Fluxes from Various Versions of Models for the Jul-Aug Case

14 Physics Configuration in MM5: the MYJ ABL and surface layer schemes the NOAH land surface model (LSM) the Dudhia short-wave, RRTM long-wave radiation schemes the Reisner microphysics parameterization the Grell convective scheme (only on the 36 and 12 km grids) Physics Configuration in WRF: the MYJ ABL and surface layer schemes the NOAH land surface model (LSM) the Dudhia short-wave, RRTM long-wave radiation schemes the Lin et al. microphysics parameterization the Kain-Fritsch convective scheme (only on the 36 km and 12 km grids) NCEP’s ETA 40-km isobaric analysis is used to initialize both WRF and MM5 at 1200 UTC 29 July 2000. Domain and Physics Configurations of MM5 and WRF

15 MM5 WRF 36 km Topography 4 km Topography 4 km Topography 36 km Topography 4 km Veg-Frac 4 km Veg-Frac 4 km Landuse 4 km Landuse MM5 WRF Differences of MM5 and WRF

16 Differences in the LSM Initialization MM5WRF Temperature at Soil Layer 1

17 Differences in the LSM Initialization MM5WRF Temperature at Soil Layer 2

18 Differences in the LSM Initialization MM5WRF Temperature at Soil Layer 3

19 Differences in the LSM Initialization MM5WRF Temperature at Soil Layer 4

20 Differences in the LSM Initialization MM5WRF Moisture at Soil Layer 1

21 Differences in the LSM Initialization MM5WRF Moisture at Soil Layer 2

22 Differences in the LSM Initialization MM5WRF Moisture at Soil Layer 3

23 Differences in the LSM Initialization MM5WRF Moisture at Soil Layer 4

24

25

26 Comparison of the simulated and observed areal averaged 2m temperatures and 10m winds

27 Comparison of the simulated and observed areal averaged 2m temperatures and 10m winds

28 Comparison of the simulated and observed areal averaged 2m temperatures and 10m winds

29 Comparison of the simulated and observed areal averaged 2m temperatures and 10m winds

30 WRFMM5WRF-mm5ics from 1200 UTC 29 July to 1200 UTC 2 August from 1200 UTC 29 July to 1200 UTC 2 August from 1200 UTC 29 July to 1200 UTC 2 August from 0000 UTC 30 July to 1200 UTC 2 August from 0000 UTC 30 July to 1200 UTC 2 August from 0000 UTC 30 July to 1200 UTC 2 August from 1200 UTC 30 July to 1200 UTC 2 August from 1200 UTC 30 July to 1200 UTC 2 August from 1200 UTC 30 July to 1200 UTC 2 August comparison of simulated forward trajectories

31 Conclusions Averaging meteorological input in time Optimizing “tunable” parameters through sensitivity experiments Improving cloud physics and cloud-radiation interaction Using MM5V3-6 for the seasonal modeling Undesirable noise in the FDDA run Uncertainties in the LSM Some differences in the simulated and observed clouds on cloudy days Recommendations

32 ETL CCOS Web Site www.etl.noaa.gov/programs/ modeling/CCOS/data www.etl.noaa.gov/programs/


Download ppt "Seasonal Modeling (NOAA) Jian-Wen Bao Sara Michelson Jim Wilczak Curtis Fleming Emily Piencziak."

Similar presentations


Ads by Google