1. PC Systems Building System Components Installation Procedures Sample PowerPoint Presentation

2. Chart of Events

3. System Components b Computer Case b Tool kit b Extra Screws b Floppy disk drive (FD) b Hard disk drive (HD) b Memory modules b Systemboard b BIOS Chip b Cooling Fan b Power Supply b Multi I/O Card b FD, HD cables

4. Device + Cable Connection Step 01 b Locate Hard Drive (HD) and connect HD cable HD cable has no slitHD cable has no slit Red strip on cable will face power connector on HDRed strip on cable will face power connector on HD b Locate Floppy Drive (FD) and connect FD cable FD cable has twistFD cable has twist Red strip on cable will face power connector on FDRed strip on cable will face power connector on FD

5. Systemboard Installation Step 02 b Place systemboard into case (do not screw in) Attach P8 + P9 power connectors to board –Black on Black b Secure systemboard in case, allowing no movement

6. Multi I/O Card Step 03 b Locate Multi I/O Card b Unlatch the cover on the expansion slot and remove b Place the Multi I/O Card into the bus slot on systemboard Press down and snap into bus slotPress down and snap into bus slot Screw cover into expansion slot + secure card into the busScrew cover into expansion slot + secure card into the bus

7. Insert Floppy + Hard Drive Step 04 b Locate FD and place the drive in the appropriate FD holder Use precision screws to hold in placeUse precision screws to hold in place b Locate HD and place the drive in the appropriate HD holder Use precision screws to hold in placeUse precision screws to hold in place

8. Connection of Cables Step 05 b Attach FD cable to Multi I/O card Red line at end of cable connects to Pin 1Red line at end of cable connects to Pin 1 b Attach HD cable to Multi I/O card Red line at end of cable connects to Pin 2Red line at end of cable connects to Pin 2

9. Power Cable Attachments Step 06 b Locate Power Supply inside PC Find power connector for 3 1/2” deviceFind power connector for 3 1/2” device –Connect the power connector to the FD (connector only fits in slot one way) Find power connector for 5 1/4” deviceFind power connector for 5 1/4” device –Connect the power connector to the HD (connector only fits in slot one way) b Make sure Main Power Cable is connected

10. Colored Connections Step 07

11. Finishing Step Step 08 b Type up steps followed b Type results of installation