1. Rbridges: Transparent Routing Radia Perlman radia.perlman@sun.com

2. Some info www.postel.org/rbridge – Has bunch of info, including how to join mailing list, the archives of mailing list, original INFOCOM paper and slides,... There is an internet draft coauthored by me, Joe Touch (touch@isi.edu), and Alper Yegin (alper.yegin@samsung.com), also posted on www.postel.org/rbridgealper.yegin@samsung.com www.postel.org/rbridge

3. Goals Glue a bunch of links together to appear to be a single LAN to IP nodes No configuration of internal switches Compatible with existing bridges Compatible with existing IP nodes (v4 and v6, endnodes and routers)

4. What’s wrong with bridges? They solve the problems on the previous slide But: – Routes not optimal – Temporary loops a disaster – Choice of meltdowns or conservative failover

5. Basic idea of transparent bridge Listen promiscuously Learn location of source address based on source address in packet and port from which packet received Forward based on learned location of destination When in doubt, forward

6. Station learning AC Q V X FG A V X,F F X,A,V

7. But loops are a disaster No hop count Exponential proliferation B1 B2 B3

8. Thus the Spanning Tree Algorithm I think that I shall never see A graph more lovely than a tree. A tree whose crucial property Is loop-free connectivity. A tree which must be sure to span So packets can reach every LAN. First the Root must be selected By ID it is elected. Least cost paths from Root are traced In the tree these paths are placed. A mesh is made by folks like me. Then bridges find a spanning tree. ………………………………Radia Perlman

9. Path from a to c 9 3 4 11 7 10 14 2 5 6 2,0,2 2,1,14 2,1,5 2,2,7 2,1,6 2,2,4 2,3,3 a c

10. Problems with Bridges Routes are not optimal (spanning tree) – STA cuts off redundant paths – If A and B are on opposite side of path, they have to take long detour path Temporary loops really dangerous – no hop count in header – proliferation of copies during loops – So, should be conservative in transition

11. Compare this to routing Routers have temporary loops, too Part of the life of distributed algorithms But IP has a hop count (TTL) An IP router only forwards in one direction And the router specifies the next recipient

12. Why bridges are slow to start forwarding Temporary loops might cause meltdown Can’t (except in certain special cases, like a port to an endnode) know if turning on a link might cause temporary loop Simple solution: wait before turning on link, so other bridges can turn off links first People want instant failover (but they don’t want meltdowns)

13. Bridge meltdowns They do occur (a Boston hospital) Lack of receipt of spanning tree msgs tells bridge to turn on link So if too much traffic causes spanning tree messages to get lost… – loops – exponential proliferation of looping packets

14. Why are there still bridges? Why not just use routers? – Bridges plug-and-play – Endnode addresses can be per-campus IP routes to links, not endnodes – So IP addresses are per-link – Need to configure routers – Need to change IP address if change links

15. Using bridges with IP Bridging is used to create a campus in which all nodes share the same prefix Looks to IP like a single link But bridging isn’t as good as routing – Suboptimal routes – Traffic concentration (onto spanning tree links) – Meltdowns – Slow failover

16. What we’d like: best of both worlds Keep transparency to endnodes and zero configuration Optimal paths Make temporary loops safe – Fast failover – No meltdowns

17. Rbridges Compatible with today’s bridges and routers Like routers, terminate bridged LAN Like bridges, glue LANs together to create one IP subnet (or for other protocols, a broadcast domain) Like routers, optimal paths, fast convergence, no meltdowns Like bridges, plug-and-play

18. Basic Rbridge idea Link state protocol among Rbridges (so know how to route to other Rbridges) “Somehow” learn location of endnodes (e.g., from data traffic, or ARP replies) Report attached endnodes in link state info Need to encapsulate pkts – To distinguish originating traffic from transit – To specify next recipient – To include a hop count

19. Rbridging R1 R2 R3 R9 R6 R7 R5 a c R8 R4

20. Encapsulation Header S=Xmitting Rbridge D=Rcving Rbridge pt=“transit” hop countoriginal pkt (including L2 hdr) Outer L2 hdr must not confuse bridges So it’s just like it would be if the Rbridges were routers Need special layer 2 destination address for unknown or multicast layer 2 destinations can be L2 multicast, or any L2 address provided it never gets used as a source address

21. Need spanning tree for flooding Need it for distributed ARP request Or for unknown layer 2 destinations (e.g., endnode knows the layer 2 address of the exit router) Don’t need to use the bridge spanning tree Instead, compute it from the link state database

22. Rbridges and Bridges R4R7R2 Seems like: R4R7 R2 Actually can be: bridged LAN

23. Example: IP nodes A and B A B RB1 RB2

24. Example: A and B, Rbridges don’t know B A issues ARP request for B RB1 doesn’t know, so issues distributed ARP request (flooded through spanning tree) Each Designated RBridge issues ARP request on its LAN RB2 receives a reply (B,b) RB2 reports (B,b) in its link state info

25. Example: A and B, RBridges DO know B A issues ARP request for “B” RB1 responds with an ARP reply (B=b) A transmits to “b” RB1 encapsulates RBridges forward towards “b”, replacing outer header on each hop, and decrementing outer hdr TTL RB2 decapsulates

26. Example: A and off-campus B A R RB1 RB2 B

27. A and off-campus B A will send to a router’s layer 2 address, say R’s layer 2 address = x RBridges have to send to that IP router If x is in the forwarding table, then RB1 encapsulates and forwards to x Else (x unknown), RB1 encapsulates and sends on spanning tree Each Designated RBridge decapsulates

28. Learning a layer 2 address Can learn from data packets Or if don’t want to for IP, listen to routing messages in order to learn layer 2 addresses of IP routers

29. Another optimization for IP Can have short endnode cache timer Designated RBridge “pings” to make sure local IP nodes still there

30. Non-IP Learn layer 2 address from data packets Flood packets for unknown destinations on spanning tree

31. New IS-IS TLVs For layer 2 only: MAC addresses that are locally connected For IP: (layer 3, layer 2) pairs, for proxy ARP

32. Other IS-IS changes Calculate a spanning tree deterministically and uniquely from link state database – pick router with smallest ID – calculate a tree with him as root – this is the tree to use for unknown layer 2 destinations, or ARP requests Make sure IS-IS instances don't mix (new L2 multicast to send IS-IS msgs?, maybe area address?)

33. Conclusions Looks to routers like a bridge – invisible, plug-and-play Looks to bridges like routers – terminates spanning tree, broadcast domain

34. Conclusions, cont’d Much better replacement for bridging – optimal paths – still plug and play and transparent – fast convergence – no meltdowns For IP – allows plug-and-play single-prefix campus