Presentation is loading. Please wait.

Presentation is loading. Please wait.

O. Siegmund Brazed body Leak Checking The latest anode on the brazed body assembly seems to have only one leaky pin, others are better than ~10 -9 so the.

Published byFlora Harris Modified over 8 years ago

Similar presentations

Presentation on theme: "O. Siegmund Brazed body Leak Checking The latest anode on the brazed body assembly seems to have only one leaky pin, others are better than ~10 -9 so the."— Presentation transcript:

1 O. Siegmund Brazed body Leak Checking The latest anode on the brazed body assembly seems to have only one leaky pin, others are better than ~10 -9 so the process is close Brazed assembly – anode side Leaky pin

2 O. Siegmund 2 8.66” window with NiCr electrode in tank Large Tank Photocathode Shoot. All materials have been loaded for the large tank photocathode process and we are proceeding to the bake step 8.66” window on translation slider

3 O. Siegmund 3 Looking down translation system, alkali well in back Alkali Flange with Sb, in deposition well Large Tank Photocathode Shoot.

Download ppt "O. Siegmund Brazed body Leak Checking The latest anode on the brazed body assembly seems to have only one leaky pin, others are better than ~10 -9 so the."

Similar presentations

Bialkali Photocathode Development

Bialkali Photocathode Development
Liquid H 2 Absorber Production Contents (1)MICE Absorber Status (2)MICE Absorber Modification (3)Plan/Schedule (4)Summary MICE CM-23 in HARBIN Shigeru.

Liquid H 2 Absorber Production Contents (1)MICE Absorber Status (2)MICE Absorber Modification (3)Plan/Schedule (4)Summary MICE CM-23 in HARBIN Shigeru.
Sputter Stand Safety Specifics Electrical Hazards High Voltage : Electrical power is required for the high voltage supply, gauging, system controller and.

Sputter Stand Safety Specifics Electrical Hazards High Voltage : Electrical power is required for the high voltage supply, gauging, system controller and.
      H-13 

      H-13 
1 LAPD Team Meeting 10/14/09 O.H.W. Siegmund, Experimental Astrophysics Group, Space Sciences Laboratory, U. California at Berkeley Bialkali Photocathode.

1 LAPD Team Meeting 10/14/09 O.H.W. Siegmund, Experimental Astrophysics Group, Space Sciences Laboratory, U. California at Berkeley Bialkali Photocathode.
CLIC RF structure master schedule and CERN production 10.07.2010.

CLIC RF structure master schedule and CERN production
Existing fabrication facilities for PC's for imaging MCP detectors Dr. O.H.W. Siegmund Experimental Astrophysics Group Space Sciences Laboratory University.

Existing fabrication facilities for PC's for imaging MCP detectors Dr. O.H.W. Siegmund Experimental Astrophysics Group Space Sciences Laboratory University.
UIC – Physics Department Fast Timer Project Bob Dysert, Alan Bross - Fermilab November 18, 2005.

UIC – Physics Department Fast Timer Project Bob Dysert, Alan Bross - Fermilab November 18, 2005.
Christopher Nantista ML-SCRF Technology Meeting July 28, 2010 REPORT.

Christopher Nantista ML-SCRF Technology Meeting July 28, 2010 REPORT.
ALD 20µm Microchannel Plates

ALD 20µm Microchannel Plates
Report from NLCTA CERN Built T18’s 1.820 degC Vacuum Braze 2.1050 degC H2 Braze (SLAC procedure) - New T24s 1.CERN Built (cells pre-fired) 2.KEK/SLAC Built.

Report from NLCTA CERN Built T18’s degC Vacuum Braze degC H2 Braze (SLAC procedure) - New T24s 1.CERN Built (cells pre-fired) 2.KEK/SLAC Built.
ENGINEERING DESIGN AND FABRICATION OF PETS V. Soldatov¹, D. Gudkov¹, I. Syratchev², A. Samoshkin¹, G. Riddone², A. Olyunin¹, S. Atieh² 1 – JINR, Dubna,

ENGINEERING DESIGN AND FABRICATION OF PETS V. Soldatov¹, D. Gudkov¹, I. Syratchev², A. Samoshkin¹, G. Riddone², A. Olyunin¹, S. Atieh² 1 – JINR, Dubna,
How to Create a Mechanism in Pro Engineer 1.Start a new assembly 2.Add “Base” and make it the “Default”

How to Create a Mechanism in Pro Engineer 1.Start a new assembly 2.Add “Base” and make it the “Default”
Translation – movement along X, Y, and Z axis (three degrees of freedom) Rotation – rotate about X, Y, and Z axis (three degrees.

Translation – movement along X, Y, and Z axis (three degrees of freedom) Rotation – rotate about X, Y, and Z axis (three degrees.
Steps Towards 8”x8” Photocathode For The Large Area Picosecond Photodetector Project At Argonne Zikri Yusof (ANL) Collaborators: Klaus Attenkofer (ANL),

Steps Towards 8”x8” Photocathode For The Large Area Picosecond Photodetector Project At Argonne Zikri Yusof (ANL) Collaborators: Klaus Attenkofer (ANL),
8/8/20061 LATE TYPE EVAP At Rest 1. 8/8/20062 LATE TYPE EVAP Components 2.

8/8/20061 LATE TYPE EVAP At Rest 1. 8/8/20062 LATE TYPE EVAP Components 2.
Welding Processes.  The process of joining two or more pieces of like metal  Parts are heated enough to cause it to melt where they meet  When the.

Welding Processes.  The process of joining two or more pieces of like metal  Parts are heated enough to cause it to melt where they meet  When the.
O. Siegmund, J. McPhate UCB, SSL 1 8in Photocathode 2 nd Try 8” PC/Seal Test Chamber –

O. Siegmund, J. McPhate UCB, SSL 1 8in Photocathode 2 nd Try 8” PC/Seal Test Chamber –
      H-13 

      H-13 
Documentation review: Beam tube assembly Comments given by CERN to the technical file submitted by Niowave prior to release for fabrication 16/10/20141.

Documentation review: Beam tube assembly Comments given by CERN to the technical file submitted by Niowave prior to release for fabrication 16/10/20141.

Similar presentations

Ads by Google