Presentation on theme: "Installing the Server Software The first step in creating a MagicInfo Pro digital signage system is to install and configure the MagicInfo Pro Server."— Presentation transcript:
Installing the Server Software The first step in creating a MagicInfo Pro digital signage system is to install and configure the MagicInfo Pro Server software on a networked PC, that is present on the same network as the MagicInfo Pro display will be installed. An installation and documentation CD was provided with the display, inside the box. This CD will be needed for this step. Included on the setup USB memory stick is an installation program, named MagicInfoServer2500.exe. Running this will begin the installation process
Installing the Server Software The first step is to select the language the software will be installed using. Clicking OK will advance to the next step in the installation process.
Installing the Server Software The user will now be presented with the welcome screen for the installation. Clicking Next will advance to the user license acceptance screen. After checking the box for accepting the user license, clicking Next again will advance to the next step of the installation process.
Installing the Server Software This is a critical step. The user must now select an Administrator password for this MagicInfo Pro Server. To operate the MagicInfo Pro Server, the user will need to first log in to the software using this password, so ensure that it is recorded before moving forward. If the user forgets or loses this password, the server software will need to be reinstalled and reconfigured. Clicking Next will advance the installation.
Installing the Server Software Now the user can select which folder the server software will be installed into. Clicking the Change button will allow the user to specify the location. Clicking Next will advance to the next step.
Now the installation is ready to proceed. Clicking Install will install the program to the specified location. A bar will illustrate the installations progress. When the installation is complete, it will advance to the next step automatically. Installing the Server Software
Now the installation is complete. The program has been installed to the specified location, and a shortcut has been placed both in the Start Menu and on the Desktop. Clicking Finish will close the installation program. Now the MagicInfo Pro Server software is ready for use!