14. MSE 630 Introduction to Solid State Physics Topics: Structure of Crystals classification of lattices reciprocal lattices bonding in crystals Vibrations and Waves in Crystals - Phonons Electrons in Crystals free electrons in metals electrons in periodic potentials semiconductors

15. Conductivity? Types? Metals, Semiconductors, Insulators, and Superconductors Atoms and Electrons Electronic Structure of materials The Bohr Model Quantum Mechanics –Schrodinger Wave Eqn –Atomic structure and Periodic Table –Bonding forces in materials

16. Ionic Bond – electron transfer and electrostatic attraction Non directional

17. Covalent Bond: electron sharing for stable outer shells Highly directional

18. Metallic bond: electron sharing between charged ion cores Non directional

19. The bond type influences the mechanical properties Both ionic and metallic bonds form close packed structures. Ions, though, have to maintain charge neutrality, so any deformation in ionic solids must be large enough to move the atoms back into registry. Metals do not have this restriction. Hence, ionic solids are brittle, while metals are ductile.

20. Other, weaker bonds Hydrogen bond: hydrogen acts as infinitesimal cation attracting two anions van der Waals bond: weak attraction between molecular dipoles

22. The structure of an ionic compound depends upon the ratio of the cation to the anion

23. The crystal lattice A point lattice is made up of regular, repeating points in space. An atom or group of atoms are tied to each lattice point

25. 14 different point lattices, called Bravais lattices, make up the crystal system. The lengths of the sides, a, b, and c, and the angles between them can vary for a particular unit cell.

26. Three simple lattices that describe metals are Face Centered Cubic (FCC) Body Centered Cubic (BCC) and Hexagonal Close Packed (HCP)

27. Whether a close packed crystal is FCC or HCP depends upon the stacking sequence of close packed planes

28. Diamond, BeO and GaAs are examples of FCC structures with two atoms per lattice point

29. Polymers are made up of repeating units “mers”, that make up a long chain. The chain may be cross-linked, or held together with van der Waals or hydrogen bonds

30. Structures may be crystalline, having repeating structure, or amorphous, having local structure but no long-range structure

31. Directions in a crystal lattice – Miller Indices Vectors described by multiples of lattice constants: ua+vb+wc e.g., the vector in the illustration crosses the edges of the unit cell at u=1, v=1, c=1/2 Arrange these in brackets, and clear the fractions: [1 1 ½] = [2 2 1]

32. Negative directions have a bar over the number e.g., Families of crystallographically equivalent directions, e.g., [100], [010], [001] are written as, or, in this example,

33. Directions in HCP crystals a 1, a 2 and a 3 axes are 120 o apart, z axis is perpendicular to the a 1,a 2,a 3 basal plane Directions in this crystal system are derived by converting the [u′v′w′] directions to [uvtw] using the following convention: n is a factor that reduces [uvtw] to smallest integers. For example, if u′=1, v′=-1, w′=0, then [uvtw]=

34. Crystallographic Planes To find crystallographic planes are represented by (hkl). Identify where the plane intersects the a, b and c axes; in this case, a=1/2, b=1, c=∞ Write the reciprocals 1/a, 1/b, 1/c: Clear fractions, and put into parentheses: (hkl)=(210)

35. If the plane interesects the origin, simply translate the origin to an equivalent location. Families of equivalent planes are denoted by braces: e.g., the (100), (010), (001), etc. planes are denoted {100}

36. Planes in HCP crystals are numbered in the same way e.g., the plane on the left intersects a 1 =1, a 2 =0, a 3 =-1, and z=1, thus the plane is

37. 3 tend to be densely packed. have several reasons for dense packing: -Typically, only one element is present, so all atomic radii are the same. -Metallic bonding is not directional. -Nearest neighbor distances tend to be small in order to lower bond energy. have the simplest crystal structures. We will look at three such structures... METALLIC CRYSTALS

38. 11 Example: Copper Data from Table inside front cover of Callister (see next slide): crystal structure = FCC: 4 atoms/unit cell atomic weight = 63.55 g/mol (1 amu = 1 g/mol) atomic radius R = 0.128 nm (1 nm = 10 cm) -7 THEORETICAL DENSITY, 

39. 15 Charge Neutrality: --Net charge in the structure should be zero. --General form: Stable structures: --maximize the # of nearest oppositely charged neighbors. IONIC BONDING & STRUCTURE

40. 16 Coordination # increases with Issue: How many anions can you arrange around a cation? COORDINATION # AND IONIC RADII

41. The Reciprocal Lattice and Waves in Crystals We use the reciprocal lattice to calculate wave behavior in crystals because sound, optical and electrical properties pass through the crystal as waves Because crystals are periodic, properties throughout the crystal will be the same as those surrounding any lattice point, contained in a volume known as a “Brillion Zone”

42. X-ray diffraction and crystal structure X-rays have a wave length, Å. This is on the size scale of the structures we wish to study X-rays interfere constructively when the interplanar spacing is related to an integer number of wavelengths in accordance with Bragg’s law:

43. Because of the numbering system, atomic planes are perpendicular to their corresponding vector, e.g., (111) is perpendicular to [111] The interplanar spacing for a cubic crystal is: Because the intensity of the diffracted beam varies depending upon the diffraction angle, knowing the angle and using Bragg’s law we can obtain the crystal structure and lattice parameter

44. The Reciprocal Lattice To analyze the atomic structure and resulting properties of crystals, we introduce the concept of the “reciprocal lattice” A reciprocal lattice vector is defined as G = 1 b 1 + 2 b 2 + 3 b 3 Where 1, 2, 3 are integers and b 1, b 2 and b 3 are primitive vectors in the reciprocal lattice

45. Why do we need reciprocal space? Because waves or vibrations can be made up of a series of waves of other frequencies, i.e., expressed as a Fourier Series: We want G∙r to equal 2  at boundaries. Therefore

46. Wave reflection in reciprocal space The reciprocal lattice vector, G =  k

47. Calculating the reciprocal lattice We construct the axis vectors b 1, b 2 and b 3 of the reciprocal lattice using the following formulas:

48. First brillion zone in a 2-D lattice

49. BCC primitive lattice vectors:FCC primitive lattice vectors:

51. Brillion Zones BCC Brillion Zone FCC Brillion Zone Brillion Zones are the same as Wigner-Seitz cells in reciprocal space