1. LHC IR UPGRADE - PHASE I CORRECTOR STATUS UPDATE N. Dalexandro, N. Elias, M. Karppinen, J. Mazet, J-C. Perez, D. Smekens, G. Trachez 03/02/10M. Karppinen TE-MSC-ML1 Q1 Q2aQ2bQ3CPD1QDX

2. Corrector Package (CP) 03/02/10M. Karppinen TE-MSC-ML2 CurrentIntegrated strength (field)Aperture MCXB (B 1 /A 1 )+/- 2.4 kA 1.5 Tm140 mm MQXS (A 2 )+/- 2.4 kA0.65 Tm @40 mm140 mm MQXSMCXH ~1 m~0.9 m MCXBV ~0.5 m MCXT (B 6 )+/- 120A0.075 Tm @ 40 mm140 mm MCXO (B 4 )+/- 120A0.035 Tm @ 40 mm140 mm MCXSO (A 4 )+/- 120A0.035 Tm @ 40 mm140 mm MCXSS (A 3 )+/- 120A0.055 Tm @ 40 mm140 mm MCXS (B 3 )+/- 120A0.055 Tm @ 40 mm140 mm IPIP IPIP MCXSS MCXS MCXSO MCXO MCXT ~0.5 m ~1 m

3. Correctors in Q2 Base-line (HV and VH) orbit corrector scheme allows controlling the orbit to a level 3 times larger that then BPM resolution. To reach the same level as the effective BPM resolution :  Provide 1.5 Tm (1.8 Tm) in H&V-plane in BOTH locations.  Feasibility study underway on combined H/V-corrector that meets the reliability requirements (Report by Mid-2010 + Model work..) An extra H/V pair means:  Magnet R&D, material R&D, design, component & tooling procurement  Additional powering and protections circuits 03/02/10M. Karppinen TE-MSC-ML3 7 m MCXBV (MCXBHV?) 1..1.3 m MQXC Q2aQ2bQ1 MQXC 10 m Q3 MQXC 10 m 1..1.3 m MCXBH (MCXBHV?) REF: S. Fartoukh, R. Tomas, J. Miles: “Specification of the Closed Orbit Corrector magnets for the NEW Inner Triplets”, sLHC Project Report 030

4. Radiation Environment (Q2a & CP) 03/02/10M. Karppinen TE-MSC-ML4 Courtesy of F. Cerrutti & A. Mereghetti EN-STI-EET, FLUKA-team

5. Radiation Environment (sLHC v2.0) Luminosity: 2 L 0 = 2 × 10 34 cm -2 s -1 & 1000 fb -1 Peak dose CP: ~50..65 MGy ø120 mm aperture, no shielding ~30..35 MGy ø140 mm aperture, no shielding ~10 MGy ø140 mm aperture, 10 mm SS Peak dose in Q2 (with 13 mm liner in Q1): ~28 MGy, ø120 mm aperture, no shielding ~ 8 MGy ø140 mm aperture, 10 mm SS 03/02/10M. Karppinen TE-MSC-ML5 Courtesy of F. Cerrutti & A. Mereghetti EN-STI-EET, FLUKA-team

6. Organization MCXB  DesignCERN  ModelCERN  Series (20 off)Special French Contribution/CERN? MQXS  DesignCERN  Model & R&DCERN & STFC  Series (5 off)Special French Contribution/CERN? MCXS and other Higher Order Correctors (TBC)  DesignCIEMAT  ModelCIEMAT  Series (5 off)Special French Contribution/CERN? Testing (cold)  at CERN  Plan B for Models: RAL, CEA (TBC) Cold mass integration and cryostat assembly at CERN 03/02/10M. Karppinen TE-MSC-ML6

7. Organization: STFC Involvement R&D on coated metallic end spacers for cos Ɵ coils (rad resistance, alternatively usable for thermal reaction of Nb3Sn Coils) Validation of porous all polyimide insulation for the 18 strand Rutherford cable Study of E-modulus of the insulated cable / dielectric properties Assembly of the models at CERN (short mech. model & model) 03/02/10M. Karppinen TE-MSC-ML7

8. NIT Funding 03/02/10M. Karppinen TE-MSC-ML8 Courtesy of S. Russenschuck

9. MCXB 4-Block Design 03/02/10M. Karppinen TE-MSC-ML9 Courtesy of L. Favre 1000 Field strength 1.5 Tm Operating temp 1.9 K Current 2.4 kA Inductance 10 mH New 4.37 mm cable & Polyimide insulation Self-supporting collars Single piece yoke Ø570 Ø140

10. Unit Integrated fieldTm6 Nominal fieldT4.0 Mag. lengthm1.50 Nominal currentA2438 Stored energykJ233 Self inductancemH78 Working point60% Cable width/mid-heightmm4.37 / 0.845 Total lengthm1.8..2 AperturemmØ140 Total masskg~2700 MCXB Initial 6-Block Design 03/02/1010M. Karppinen TE-MSC-ML

11. Unit Integrated fieldTm1.5 Nominal fieldT2.3 Mag. lengthm0.65 Nominal currentA2400 Stored energykJ28 Self inductancemH10 Working point50% Cable width/mid-heightmm4.37 / 0.845 Total lengthm~1 AperturemmØ140 Total masskg~2000 MCXB Single-Layer Design 03/02/1011M. Karppinen TE-MSC-ML

12. 18-Strand Cable Strand parameters Cu:Sc1.75 Strand diameter0.48mm Metal section0.181mm 2 No of filaments2300 Filament diam.6.0µm I(5T,4.2K)203*A jc3085*A/mm 2 Cable Parameters No of strands18 Metal area3.257mm 2 Cable thickness0.845mm Cable width4.370mm Cable area3.692mm 2 Metal fraction0.882 Key-stone angle0.67degrees Inner Thickness0.819mm Outer Thickness0.870mm Polyimide Insulation: 2 x 25µm + 55 µm Trial cabling length (~100 m) done! Insulation trials & characterization in progress.. 03/02/1012M. Karppinen TE-MSC-ML *) extracted strand March -09

13. Cable Insulation 03/02/10M. Karppinen TE-MSC-ML13

14. Cable insulation 03/02/10M. Karppinen TE-MSC-ML14

15. Conductor and Insulation Needs 03/02/10M. Karppinen TE-MSC-ML15 18-strand Cable MCXBMQSX Unit Cable Length32030m Total Cable Length7.21.2km Total Strand (+5%)136 22.7km Polyimide 25 µm61.2kg Polyimide 55 µm71.3kg ~250 km of strand in stock @CERN

16. MCXB 4-Block Design: FEA 03/02/10M. Karppinen TE-MSC-ML16 150 mm model to verify material properties and assembly parameters Courtesy of N. Elias

17. MCXB 3D (return end) 03/02/10M. Karppinen TE-MSC-ML17 ˜260 mm B1= 0.37 Tm x 2 + 2.28T x 0.34 m = 1.5 Tm ENDSSTRAIGHT b 3 = -0.04 units b 5 = -13.48 units b 7 = -9.11 units b 9 = -2.14 units b 11 = -0.82 units Design current = 2.4 kA Coil length = ˜0.84 m Total length = ˜1 m

18. MCXB 3D Harmonics 03/02/10 M. Karppinen TE-MSC-ML18 Integrated Field (2.4 kA) B1 1.5 Tm b3 0.20 unit b5 -3.59 unit b7 -4.46 unit b9-0.84 unit b11-0.41 unit a1 -22.71 unit a3 6.32 unit a5 -0.52 unit a7 -0.07 unit a9 0.03 unit a11 -0.02 unit

19. MCXB 4-Block Design Quench (3kA) 03/02/10M. Karppinen TE-MSC-ML19 Rd = 0.16 Ω Warm diode No heaters

20. MQXS Assembly 03/02/10M. Karppinen TE-MSC-ML20 Ø570 Ø140 900 Field strength 0.65 Tm Gradient 25.5 T/m Operating temp 1.9 K Current 2.4 kA Inductance 3.3 mH New 4.37 mm cable & Polyimide insulation Single layer coils Self-supporting collars Single piece yoke Courtesy of G. Villiger

21. MQSX Initial 2-Layer Design Unit Nominal gradientT/m 40 Mag. lengthm 0.5 Nominal currentA 1602 Stored energykJ 19.1 Self inductancemH 15 Working point <55% Cable width/mid-heightmm3.40 / 0.845 Cu/Sc 1.2 Total lengthm ~0.8 Aperturemm ø140 Total masskg ~500 03/02/1021M. Karppinen TE-MSC-ML

22. MQSX Single-Layer Base-Line Design Unit Nominal gradientT/m 21 Mag. lengthm 0.64 Nominal currentA 2400 Stored energykJ 8.8 Self inductancemH 3.0 Working point 44 % Cable width/mid-heightmm4.37 / 0.845 Cu/Sc 1.2 Total lengthm ~0.9 Aperturemm ø140 Total masskg ~500 03/02/1022M. Karppinen TE-MSC-ML

23. MQSX 3D (return end) 03/02/10M. Karppinen TE-MSC-ML23 ˜120 mm A2(40 mm)= 0.087 Tm x 2 + 1.02 T/m x 0.47 m = 0.65Tm ENDSSTRAIGHT a 6 = -0.39 units a 10 = 0.01 units a 14 = 1.35 units Design current = 2.4 kA Coil length = 0.7 m Total length = ~0.9 m

24. MQSX 3D harmonics 03/02/10M. Karppinen TE-MSC-ML24 Integrated Field (2.4 kA) A2 0.65 Tm a6 0.04 unit a10 0.25 unit a14 -1.37 unit b2 19.59 unit b6 0.49 unit b10 -0.08 unit b14 -0.01 unit

25. MQSX Single Layer Design Quench (3kA) 03/02/10M. Karppinen TE-MSC-ML25 Rd = 0.16 Ω Warm diode No heaters

26. MQXS Single-Layer Design: FEA 03/02/10M. Karppinen TE-MSC-ML26 Courtesy of N. Elias

27. Super-ferric MCSX Design report in progress This concept is no longer compatible with the requirements Updated scope of CIEMAT’s involvement being discussed 03/02/10M. Karppinen TE-MSC-ML27 Courtesy of Iker Rodriguez (CIEMAT)

28. Next steps… Optics studies => Confirm parameters & Lay-out (getting there..) Cabling & insulation trials and characterization (in progress..) Detailed fabrication design (magnet & tooling) (in progress..) Model magnet construction (MCXB, MQXS) Feasibility study of combined H-V orbit corrector (in progress..)  Material R&D, Trials, Magnet model..? Higher order correctors  Magnetic and mechanical designs(Feb -10.. Sep -10)  Material R&D (Mar -10.. Nov -10)  Conductor procurement (Aug -10.. Jul -11)  Model/prototype magnets construction (Jul -11..May -12) 03/02/1028M. Karppinen TE-MSC-ML

29. Milestones… (MCXB & MQXS) Parameter listOct-09..Jan-10 Magnetic and mechanical designNov-09 Fabrication drawingsMay-10 Trial coilsJul-10 Mechanical modelMay-10 & Jul -10 Model magnets completedDec-10 Technical specificationsMar-11 Industrial contractsJul-11 Pre-series magnetsJul-12 Series productionSep-12.. Dec-13 03/02/1029M. Karppinen TE-MSC-ML

30. Preliminary Cost-estimate 03/02/10M. Karppinen TE-MSC-ML30 Low Profile Costing, considering free material (SC cable, steel for collars, iron for laminations), and Contractors already equipped with curing press and collaring press.

31. Yet To Define… Integration & Parameters  Final optics, Orbit correction scheme, error tables  Bus-bar routing and X-sections  Cold-mass & Cryo-magnet integration  QPS design and lay-out Contractual  Scope of Special French contribution  Industrial procurement and/or in-house production  Testing Funding.. 03/02/10M. Karppinen TE-MSC-ML31