Presentation is loading. Please wait.

Presentation is loading. Please wait.

Doc.: IEEE 802.11-11/0871r0 Submission June 2011 Power Saving in Beam Beamforming for 11ad Date: 2011-06-16 Authors: Slide 1.

Published byEmery Marshall Modified over 8 years ago

Similar presentations

Presentation on theme: "Doc.: IEEE 802.11-11/0871r0 Submission June 2011 Power Saving in Beam Beamforming for 11ad Date: 2011-06-16 Authors: Slide 1."— Presentation transcript:

1 doc.: IEEE 802.11-11/0871r0 Submission June 2011 Power Saving in Beam Beamforming for 11ad Date: 2011-06-16 Authors: Slide 1

2 doc.: IEEE 802.11-11/0871r0 Submission June, 2011 Slide 2 Abstract:This document discusses the power saving in beacon beamforming Purpose:This document propose resolution for CID3205 and CID3208. Summary CIDPageClause CommentProposed Change 320533510.2.4.1Does the STA needs to wake up for every directional beacon ? That is not good for power consumption Create a power saving feature to listen to selected beacons only 32082949.35.5.4Please clarify "regular schedule". Does beacon transmission with multiple DBand antennas has a 16 regular schedule as well ? Clarify

3 doc.: IEEE 802.11-11/0871r0 Submission Beacon Transmission Currently, TXSS is performed during beacon transmission TXSS rotates beacon transmission through antenna sectors in random order in BTI during one or multiple beacon intervals TXSS can contain up to 128 sectors/antennas. However, most likely only up to 16 or 32 sectors are used. Stations acquire the best TX antenna sector/antenna by listening to one or multiple beacons through TXSS training (at BTI or SP) Power save stations periodically wake up to receive a beacon but does not know when the best sector/antenna occurs Power save station stays up longer than necessary to wait for the “good” beacons  this increases power consumption June, 2011 Slide 3

4 doc.: IEEE 802.11-11/0871r0 Submission PS STAs know the transmission schedule ? 9.35.5.4 Beamforming in A-BFT with multiple DBand antennas (P294L16): “A PCP/AP shall have an A-BFT every k BIs, where k is the value indicated by the N- BIs A-BFT subfield in the beacon interval control field. In an A-BFT, the PCP/AP shall receive in a quasi-omni antenna pattern using the DBand antenna indicated by the value of the DBand Antenna ID subfield within the ScS field transmitted in the DBand Beacon. A PCP/AP with multiple DBand antennas has a regular schedule of receiving through each DBand antenna. The PCP/AP shall switch RX DBand antenna every N A-BFT in Ant A-BFTs allocations, where N A-BFT in Ant is the value of the N A-BFT in Ant subfield within the beacon interval control field. Does this imply PCP/AP has a regular schedule of transmitting each beacon through each antenna as well ? And only one antenna should be used in a beacon ? - needs clarifications If this is the case, power save station can predict the schedule of the transmit antenna. However, power save station still cannot predict transmit sector schedule (thus, needs to stay awake longer during beacon reception). June, 2011 Slide 4

5 doc.: IEEE 802.11-11/0871r0 Submission Wake Up Duration for Power Save Stations Power save stations might need to be awake for all the BTI’s in a complete transmission of all sectors/antennas to receive a beacon This increase the power consumption and could be a significant impact on the standby time of the battery-based devices Lengthening the sleep period too long to save power can introduce latency June, 2011 Slide 5 BTI (TXSS) Beacon Interval Complete Transmission of all Sectors/Antennas Wake Up BTI (TXSS)

6 doc.: IEEE 802.11-11/0871r0 Submission Desired Low Power Operation Allow power save stations to predict the next time beacon will be transmitted through a selected sector/antenna. Power save stations wake up to receive the desired beacon and go back to sleep Reduces the wake up duty cycle (from up to 16 or 32 to 1) June, 2011 Slide 6 BTI (TXSS) Beacon Interval Complete Transmission of all Sectors/Antennas Wake Up Earlier possible beacon transmission time (Note: Receiver PLL can be turned on earlier to allow for sufficient time to settle) TBTT BTI (TXSS)

7 doc.: IEEE 802.11-11/0871r0 Submission Proposed Solution PCP may send the parameters of the random Sector ID pattern to enable the power save stations to predict the schedule of sector/antenna to be used June, 2011 Slide 7

8 doc.: IEEE 802.11-11/0871r0 Submission Random Antenna Sector ID Pattern Desired property: rotate through all antenna sector IDs in N beacon transmissions (N= total number of antenna sectors) to provides good spatial coverage and low latency June, 2011 Slide 8

9 doc.: IEEE 802.11-11/0871r0 Submission Random Sequence Generator 1 June, 2011 Slide 9 Sequence Generator 1 is shown in Figure and is defined as follows: Generate the sector IDs for subsequent DBand Beacons by advancing the Sequence Generator 1, which is initialized using Tap 1 and State 1 contained in the Antenna Sector ID Pattern element received from the PCP/AP. Advance the Sequence Generator 1 by one shift for each anticipated DBand Beacon transmission thereafter. After advancing the Sequence Generator 1, if the next state equals the initial state for the second time, overwrite the state with an all-zero state. The next state following the state following all zero-state uses the first 6 bits of the state of Sequence Generator 2 as the initial state. If the STA’s total number of sectors is not equal to the period of the Sequence Generator 1, ignore state(s) greater than or equal total number of sectors and continue advancing Sequence Generator 1 until the state is less than the total number of sectors. NOTE – The taps are selected from the set of sequences with maximal length property. 012345 012345 Tap 1 State 1 (= Sector ID ) Sequence Generator 1

10 doc.: IEEE 802.11-11/0871r0 Submission Random Sequence Generator 2 June, 2011 Slide 10 Sequence Generator 2 is shown in Figure and is defined as follows: Sequence Generator 2 is initiated with the value of the Tap 2 and State 2 fields contained in the Antenna Sector ID Pattern element received from the PCP/AP. Sequence Generator 2 is advanced by one shift when a new initial state is needed from Sequence Generator 1. NOTE – The taps are selected from the set of the sequences with maximal length property. 012345 012345 Tap 2 State 2 Sequence Generator 2 6 6 7 7

11 doc.: IEEE 802.11-11/0871r0 Submission Antenna Sector ID Pattern IE Antenna sector ID pattern Response IE June, 2011 Slide 11 Bits: 4 Type 6 Tap 1 8 Element ID The Element ID field is equal to the value for the Antenna Sector ID Pattern, specified in Table 8-53 (Element IDs). The Length field for this element indicates the length of the Information field. The Type field is set to 0 for Random Sequence Generator. Values 1 to 15 are reserved. The Tap 1 field indicates the taps for Sequence Generator 1. The State 1 field indicates the state for Sequence Generator 1. The Tap 2 field indicates the taps for Sequence Generator 2. The State 2 field indicates the state for Sequence Generator 2. 6 State 1 8 Tap 2 State 2 8 Length 8

12 doc.: IEEE 802.11-11/0871r0 Submission Changes in 10.2.4.1 (P335L15 Insert text) PCP/AP may transmit Antenna Sector ID pattern element to non-PCP/non-AP station during transmission of the power save configuration response, probe response, during the PS mode set up, or other management frame exchanges. June, 2011 Slide 12

13 doc.: IEEE 802.11-11/0871r0 Submission Changes in 10.2.4.1 (P335L23) - Active mode: A STA shall be in the Awake state, except that when in Active mode the STA can switch to Doze state in an Awake BI in the A-BFT and in all SPs/CBAPs in which the STA is allowed to Doze in as indicated in Table 51. During BTI, Each non-PCP/non-AP STA may only wake up to receive beacon(s) transmitted through the selected antenna sector ID(s), including the sector mostly recently transmitted to PCP/AP in the TXSS, using the information provided in the Antenna Sector ID pattern element. (P335L26) - Power Save (PS) mode: A STA alternates between the Awake and the Doze states, as determined by the rules defined in this subclause. During BTI in the awake state, Each non-PCP/non-AP STA may only wake up to receive beacon(s) transmitted through the selected antenna sector ID(s), including the sector mostly recently transmitted to PCP/AP in the TXSS, using the information provided in the Antenna Sector ID pattern element. June, 2011 Slide 13

14 doc.: IEEE 802.11-11/0871r0 Submission Changes in 10.2.4.1 (P335L41) Table 68 Power management states for an Awake BI BI portion | PPS PCP PS | non-PCP/non-AP STA –BTI: BTI | Awake | Awake or Doze June, 2011 Slide 14

15 doc.: IEEE 802.11-11/0871r0 Submission 8.5.16.4 Power Save Configuration Response – (P188L28) Table 37 Power Save Configuration Response frame Action field format –(Insert after P189L12) The Antenna Sector ID Pattern is defined in 8.4.2.xxx. June, 2011 Slide 15 Order Information 1 Category 2 Action 3 Dialog Token 4 Status Code 5 Wakeup Schedule element (optional) 6 Antenna sector ID Pattern (optional)

16 doc.: IEEE 802.11-11/0871r0 Submission 8.3.3.10 Probe Response frame format P110L12 June, 2011 Slide 16 40Multi-bandThe Multi-band element is optionally present if dot11MultibandActivated is true. 41DBand CapabilitiesThe DBand Capabilities element is present when dot11DBandCapable is true. 42DBand OperationThe DBand Operation element is present when dot11DBandCapable is true. 43Multiple MAC addressThe Multiple MAC addresses element is present when dot11MultipleMACActivated is true. 44Antenna Sector ID Pattern The Antenna Sector ID Pattern element is optionally present.

17 doc.: IEEE 802.11-11/0871r0 Submission Clarifications of Beacon Transmission DBand antenna (9.35.4 Beamforming in BTI, P289L12) When a PCP/AP has more than one DBand antenna, the TXSS shall cover all the sectors in all Dband antennas. A PCP/AP with multiple DBand antennas has a regular schedule of transmitting through each DBand antenna. Only one DBand antenna shall be used in a BTI. (9.35.5.4 Beamforming in A-BFT with multiple DBand antennas, P296L16) A PCP/AP with multiple DBand antennas has a regular schedule of receiving through each DBand antenna corresponding to the Dband antenna in which the beacon is transmitted through. June 2011 Slide 17

Download ppt "Doc.: IEEE 802.11-11/0871r0 Submission June 2011 Power Saving in Beam Beamforming for 11ad Date: 2011-06-16 Authors: Slide 1."

Similar presentations

Submission doc.: IEEE 802.11-12/1357r3 Nov. 2012 Slide 1 Dynamic TIM and Page Segmentation Date: 2012-11-08 Authors: Weiping Sun, Seoul National University.

Submission doc.: IEEE /1357r3 Nov Slide 1 Dynamic TIM and Page Segmentation Date: Authors: Weiping Sun, Seoul National University.
Doc.: IEEE 802.11-10/0883r1 Submission July 2010 Slide 1 Comment Resolution for “Spatial Reuse” Subgroup Date: 2010-07-14 Authors: Thomas Derham, Orange.

Doc.: IEEE /0883r1 Submission July 2010 Slide 1 Comment Resolution for “Spatial Reuse” Subgroup Date: Authors: Thomas Derham, Orange.
Doc.: IEEE 802.11-14/0509r3 Submission Proposed Resolution to CID 72, 119 and 128 Qian ChenSlide 1 May 2014 Date: 2014-05-21.

Doc.: IEEE /0509r3 Submission Proposed Resolution to CID 72, 119 and 128 Qian ChenSlide 1 May 2014 Date:
Submission doc.: IEEE 11-10/0259r0 March 2013 Jarkko Kneckt (Nokia)Slide 1 CID 266 & CID 281 Date: 2013-03-08 Authors:

Submission doc.: IEEE 11-10/0259r0 March 2013 Jarkko Kneckt (Nokia)Slide 1 CID 266 & CID 281 Date: Authors:
Doc.: IEEE 802.11-12/1054r0 Submission Sep. 2012 Santosh Pandey (Cisco)Slide 1 FILS Reduced Neighbor Report Date: 2012-09-07 Authors:

Doc.: IEEE /1054r0 Submission Sep Santosh Pandey (Cisco)Slide 1 FILS Reduced Neighbor Report Date: Authors:
Doc.: IEEE 802.11-13/1207r1 Submission September 2013 Matthew Fischer et al (Broadcom)Slide 1 CID 205 BSSID Color Bits Date: 2013-09-16 Authors:

Doc.: IEEE /1207r1 Submission September 2013 Matthew Fischer et al (Broadcom)Slide 1 CID 205 BSSID Color Bits Date: Authors:
Doc.: IEEE 802.11-13/0089r0 Submission Listen interval update Jan 2013 Slide 1 Date: 2013-01-13 Authors: Jinsoo Choi, LG Electronics.

Doc.: IEEE /0089r0 Submission Listen interval update Jan 2013 Slide 1 Date: Authors: Jinsoo Choi, LG Electronics.
Doc.: IEEE 802.11-15/0880r2 Submission Scheduled Trigger frames July 2015 Slide 1 Date: 2015-07-04 Authors: A. Asterjadhi, H. Choi, et. al.

Doc.: IEEE /0880r2 Submission Scheduled Trigger frames July 2015 Slide 1 Date: Authors: A. Asterjadhi, H. Choi, et. al.
Doc.: IEEE 802.11-12/0102r2 SubmissionLiwen Chu Etc.Slide 1 TGah Power Saving Date: 2012-01-16 Authors: Date: Jan, 2012.

Doc.: IEEE /0102r2 SubmissionLiwen Chu Etc.Slide 1 TGah Power Saving Date: Authors: Date: Jan, 2012.
Doc.: IEEE 802.11-12/0840r1 Submission AP Assisted Medium Synchronization Date: 2012-09-17 Authors: September 2012 Minyoung Park, Intel Corp.Slide 1.

Doc.: IEEE /0840r1 Submission AP Assisted Medium Synchronization Date: Authors: September 2012 Minyoung Park, Intel Corp.Slide 1.
Doc.: IEEE 802.11-13/0720r1 SubmissionSlide 1 Date: 2013-07-16 Presenter: Spatial Sharing Mechanism in 802.11aj (60GHz) July 2013 Francois Chin.

Doc.: IEEE /0720r1 SubmissionSlide 1 Date: Presenter: Spatial Sharing Mechanism in aj (60GHz) July 2013 Francois Chin.
Doc.: IEEE 802.11-13/0071r0 January 2013 Submission Channel indication in RAW/TWT Date: 2013-01-14 Authors: Merlin, Qualcomm Slide 1.

Doc.: IEEE /0071r0 January 2013 Submission Channel indication in RAW/TWT Date: Authors: Merlin, Qualcomm Slide 1.
Doc.: IEEE 802.11-07/2215r4 Submission August 2007 Ganesh Venkatesan, Intel CorporationSlide 1 Proposal –Radio Resource Measurement Capability Enabled.

Doc.: IEEE /2215r4 Submission August 2007 Ganesh Venkatesan, Intel CorporationSlide 1 Proposal –Radio Resource Measurement Capability Enabled.
Doc.: IEEE 802.11-08/0619r1 Submission May 2008 M. Benveniste (Avaya Labs) Scheduled service periods in wireless mesh Notice: This document has been prepared.

Doc.: IEEE /0619r1 Submission May 2008 M. Benveniste (Avaya Labs) Scheduled service periods in wireless mesh Notice: This document has been prepared.
Doc.: IEEE 802.11-14/0782r2 Submission Proposed Resolution to CID 120 Slide 1 July 2014 Qian Chen.

Doc.: IEEE /0782r2 Submission Proposed Resolution to CID 120 Slide 1 July 2014 Qian Chen.
Doc.:IEEE 802.11-12/0114r0 January 2012 Low Power Medium Access Date: 2012-1-16 Slide 1 Authors:

Doc.:IEEE /0114r0 January 2012 Low Power Medium Access Date: Slide 1 Authors:
Doc.: IEEE 802.11-12/1324r0 November 2012 Very Low Energy Paging Date: 2012-11-12 Authors: Slide 1 S. Merlin et al.

Doc.: IEEE /1324r0 November 2012 Very Low Energy Paging Date: Authors: Slide 1 S. Merlin et al.
Submission doc.: IEEE 11-11/1204r1 ZTE CorporationSlide 1 Power saving mechanism consideration for 802.11ah framework Date: 2011-09-18 Authors: Sept 2011.

Submission doc.: IEEE 11-11/1204r1 ZTE CorporationSlide 1 Power saving mechanism consideration for ah framework Date: Authors: Sept 2011.
Doc.: IEEE 802.11-13/0720r0 SubmissionSlide 1 Date: 2013-07-16 Presenter: Spatial Sharing Mechanism in 802.11aj (60GHz) July 2013 Francois Chin.

Doc.: IEEE /0720r0 SubmissionSlide 1 Date: Presenter: Spatial Sharing Mechanism in aj (60GHz) July 2013 Francois Chin.
Doc.: IEEE 802.15-09-0384-01-003c SubmissionSlide 1 Qualcomm 2/29/2016 Slide 1 Project: IEEE P802.15 Working Group for Wireless Personal Area Networks.

Doc.: IEEE c SubmissionSlide 1 Qualcomm 2/29/2016 Slide 1 Project: IEEE P Working Group for Wireless Personal Area Networks.

Similar presentations

Ads by Google