Presentation is loading. Please wait.

Presentation is loading. Please wait.

Lecture 3 Section 2.5 Dependent Sources. Characteristics Dependent sources establish a voltage or current whose value depends on the value of a voltage.

Published byCaroline Richardson Modified over 8 years ago

Similar presentations

Presentation on theme: "Lecture 3 Section 2.5 Dependent Sources. Characteristics Dependent sources establish a voltage or current whose value depends on the value of a voltage."— Presentation transcript:

1 Lecture 3 Section 2.5 Dependent Sources

2 Characteristics Dependent sources establish a voltage or current whose value depends on the value of a voltage or current else where in the circuit. You cannot specify the value of a dependent source unless you know the value of the voltage or current on which it depends.

3 Dependent Sources

4 BJT Example (2) Class: ES231 Circuit: Audio amplifier

5 BJT Example (2) Bipolar Junction Transistor=BJT A BJT can be modeled by a voltage Controlled current source.

6 A Simple Voltage Amplifier You will learn how to represent the amplifier using its small signal model. Let’s concentrate on the small signal model for now. 1.Assign Io 2.Apply KCL 3.Determine the Vout/V1

7 Example 1 Find v o

Download ppt "Lecture 3 Section 2.5 Dependent Sources. Characteristics Dependent sources establish a voltage or current whose value depends on the value of a voltage."

Similar presentations

1 Practical OP-AMP Circuits. 2 i i Integrator 3 Differentiator i i.

1 Practical OP-AMP Circuits. 2 i i Integrator 3 Differentiator i i.
ELECTRICAL ENGINEERING: PRINCIPLES AND APPLICATIONS, Fourth Edition, by Allan R. Hambley, ©2008 Pearson Education, Inc. Lecture 27 Bipolar Junction Transistors.

ELECTRICAL ENGINEERING: PRINCIPLES AND APPLICATIONS, Fourth Edition, by Allan R. Hambley, ©2008 Pearson Education, Inc. Lecture 27 Bipolar Junction Transistors.
Bipolar Junction Transistors: Operation, Circuit Models, and Applications AC Power CHAPTER 10.

Bipolar Junction Transistors: Operation, Circuit Models, and Applications AC Power CHAPTER 10.
C. Hutchens Chap 4 ECEN 3313 Handouts 1 Chapter 4 Bipolar Junction Transistors.

C. Hutchens Chap 4 ECEN 3313 Handouts 1 Chapter 4 Bipolar Junction Transistors.
Chapter 13 : Bipolar Junction Transistors 13-0 Introduction 13-1 Current and voltage relationships 13-2 Common –emitter characteristics 13-3 Load –line.

Chapter 13 : Bipolar Junction Transistors 13-0 Introduction 13-1 Current and voltage relationships 13-2 Common –emitter characteristics 13-3 Load –line.
The Bipolar Junction Transistor

The Bipolar Junction Transistor
Lecture 2 2.1 Sources 2.2 Ohm’s Law 2.4 Kirchhoff’s Laws.

Lecture Sources 2.2 Ohm’s Law 2.4 Kirchhoff’s Laws.
7.2 The Basic Gain Cell 7.3 The Cascode Amplifier

7.2 The Basic Gain Cell 7.3 The Cascode Amplifier
Bipolar Junction Transistors EE314. Chapter 13: Bipolar Junction Transistors 1.History of BJT 2.First BJT 3.Basic symbols and features 4.A little bit.

Bipolar Junction Transistors EE314. Chapter 13: Bipolar Junction Transistors 1.History of BJT 2.First BJT 3.Basic symbols and features 4.A little bit.
Lecture 71 Nodal Analysis (3.1) Prof. Phillips February 7, 2003.

Lecture 71 Nodal Analysis (3.1) Prof. Phillips February 7, 2003.
Module 2: Part 2 Basic BJT Amplifiers. Learning Objectives After studying this module, the reader should have the ability to: n Explain graphically the.

Module 2: Part 2 Basic BJT Amplifiers. Learning Objectives After studying this module, the reader should have the ability to: n Explain graphically the.
Lecture 261 Nodal Analysis. Lecture 262 Example: A Summing Circuit The output voltage V of this circuit is proportional to the sum of the two input currents.

Lecture 261 Nodal Analysis. Lecture 262 Example: A Summing Circuit The output voltage V of this circuit is proportional to the sum of the two input currents.
EE105 Fall 2007Lecture 4, Slide 1Prof. Liu, UC Berkeley Lecture 4 OUTLINE Bipolar Junction Transistor (BJT) – General considerations – Structure – Operation.

EE105 Fall 2007Lecture 4, Slide 1Prof. Liu, UC Berkeley Lecture 4 OUTLINE Bipolar Junction Transistor (BJT) – General considerations – Structure – Operation.
Department of EECS University of California, Berkeley EECS 105 Fall 2003, Lecture 18 Lecture 18: Bipolar Single Stage Amplifiers Prof. Niknejad.

Department of EECS University of California, Berkeley EECS 105 Fall 2003, Lecture 18 Lecture 18: Bipolar Single Stage Amplifiers Prof. Niknejad.
Lect4EEE 2021 Nodal Analysis Dr. Holbert January 28, 2008.

Lect4EEE 2021 Nodal Analysis Dr. Holbert January 28, 2008.
Lecture 271 More Nodal Analysis. Lecture 272 Where We Are Nodal analysis is a technique that allows us to analyze more complicated circuits than those.

Lecture 271 More Nodal Analysis. Lecture 272 Where We Are Nodal analysis is a technique that allows us to analyze more complicated circuits than those.
1 KMUTT: S. Srakaew CPE 221 Introduction What is “Electronics”? Electric circuit Connections of conductive wires and passive devices Electronics circuit.

1 KMUTT: S. Srakaew CPE 221 Introduction What is “Electronics”? Electric circuit Connections of conductive wires and passive devices Electronics circuit.
Lecture 2 2.1 Sources 2.2 Ohm’s Law 2.4 Kirchhoff’s Laws.

Lecture Sources 2.2 Ohm’s Law 2.4 Kirchhoff’s Laws.
Semiconductor circuit elements and dependent sources

Semiconductor circuit elements and dependent sources
Amplifier Circuit This amplifier circuit DC analysis.

Amplifier Circuit This amplifier circuit DC analysis.

Similar presentations

Ads by Google