1. TigerSHARC processor and evaluation board Different capabilities Different functionality

2. 2 / 26 Concepts tackled Differences between “processor” and “evaluation board” Functionality present on TigerSHARC evaluation board TigerSHARC is NOT a microcontroller.  A/D and D/A added simply to give evaluation board “something to process” The “project” for the term.  Learn about TigerSHARC processor architecture  Learn basics of how assembly code and architecture interact  Set up a project (mainly in) in “C++” to capture a signal  Do some signal processing in “C++”  Work through optimizing “one” subroutine into assembly code using more and more parallel processor features

3. 3 / 26 TS201S Evaluation board contains 2 processors P0 (DSPA) and P1 (DSPB) TWO TS201S processors Error messages when linking about P0 and P1 mean problems with code on specific processor

4. 4 / 26 Evaluation board – Link Ports Designed for “star” Configuration – Up to 8 processors working together P0 to P7 (selectable by switches on back of evaluation board (Never tried – Don’t destroy link ports)

5. 5 / 26 JTAG debug ONLY AVALIABLE IN 3 rd floor labs ICT318 TigerSHARC (some stations). ICT320 Blackfin (some stations). Some boards available for home use of USB connector. Lower speed communication rates than JTAG (factor of 20 - 100). Discuss deposit issues for home loan. Audio connectors. Max input voltage around 1 V p-p with no DC. Too great a voltage destroys the board Use MPEG or other players Keep Volume down Damage and distortion issues

6. 6 / 26 Buttons and LEDs split between processors Much “stuff” on the board shared between processors (but NOT all) Will be using IRQ lines IRQ0 –button switch on panel IRQ1 – digital signal from light sensor Demonstrate “SIMPLE” dual processing

7. 7 / 26 Evaluation Board Architecture P0 P1

8. 8 / 26 Two processor operations in ENCM515 Lab. 1, 2 and 3  During TESTS only 1 processor will be used as we check the functionality of various functions written in C++ (Lab. 1), partially optimized assembly code (Lab. 2), highly optimized but not ultimate optimization of assembly code (Lab. 3). Other processor is halted  WARNING: Make sure that you “run” the processor that you loaded the code into – my favourite “defect”  When running the code, one processor is “idle” Lab. 4  Plans to have the work load split between two processors.  CONCEPTS only (to say we can do it). Essentially processor 1 takes data, processor processes it – same code as other Labs.

9. 9 / 26 Processors can share EXTERNAL memory Memory allocation depends on ID # Processors can access each other’s INTERNAL memory and registers

10. 10 / 26 Note – labeled processor A and B rather than processor 0 and 1

11. 11 / 26 Note – labeled processor A and B rather than processor 0 and 1 Will be using IRQ lines IRQ0 –button switch on panel IRQ1 – digital signal from light sensor Demonstrate “SIMPLE” dual processing

12. 12 / 26 How to use the evaluation board capability Read a lot in the hardware manual Modify some of the example programs provided in C:\Program Files\Analog Devices\VisualDSP 4.5\TS\Examples\ADSP-TS201 EZ-Kit Lite and then read a lot in the hardware manual

13. CONCEPT OF ENCM515 LABS Signal processing demonstrated through the development of algorithms for an improved doctors “stethoscope” and associated equipment. Demonstration rather than commercial exploitation of TigerSHARC’s highly parallel processing capability.  Basically looking for something reasonably easy, but non-trivial, to hang the lectures and laboratories on. 13 / 26

14. TSL230R-Based Pulse Oximeter A small section of plastic electrical conduit houses both the TSL230R sensor and the red and IR LEDs. The TSL230R registers the amount of light passing through the inside diameter of the conduit, which, in this case, is through a patient’s finger. Adapted from www.circuitcellar.com/library/ print/1204/Bachiochi173/4.htm 14 / 26

15. What to we expect to see? As blood flows through the circulatory system, it changes density because of the heart’s pumping pressure. This change also changes the absorption rate of light, effectively modulating the light absorption. The total light absorption is a combination of modulated and constant absorption, which is similar to a small AC noise riding atop a DC voltage. Adapted from www.circuitcellar.com/library/ print/1204/Bachiochi173/4.htmwww.circuitcellar.com/library/ 15 / 26

16. How we far will go in the laboratory is your choice Study the absorption relationship of oxygen levels in the blood for the red and IR wavelengths. Notice how the oxygen level affects the absorption rate at the red wavelength while it remains almost constant at IR wavelengths. Adapted from www.circuitcellar.com/library/ print/1204/Bachiochi173/4.htm 16 / 26

17. Details from Circuit Cellar Article The TSL230R’s frequency output displayed on my oscilloscope shows a slow frequency jitter marked by the vertical cursors. The output frequency shifts with the varying amount of light absorption because of the blood pulsing within the light’s path. Adapted from www.circuitcellar.com/library/ print/1204/Bachiochi173/5.htm 17 / 26

18. Period of light sensor from article – can we do better? This Excel chart displays imported sample values over time. Samples of the output frequency (30 samples per second formatted in microseconds) were sent out the serial port and captured to a file by HyperTerminal. Adapted from www.circuitcellar.com/library/ print/1204/Bachiochi173/7.htm 18 / 26

19. Labs. Check article for how “determine heart rate” was handled in original article. Can we pick out a more accurate heart beat / signal using a DSP convolution / correlation approach?  These are numerical methods involving much memory use, adds and multiplications. Typical DSP stuff.  Straight forward optimization show TigerSHARC capability 19 / 26

20. 20 / 26 ECE-ADI-Project Was asked to develop (as part of Analog Devices University Ambassadorship) to develop demonstration programs and place on the web Have now developed  SHARC – ADSP-21061 (Previous 515) Audio project utilities  Blackfin – ADSP-BF533 (Current ENCM415, ENCM511 in 2008) Audio project utilities, Video Project utilities  Blackfin – ADSP-BF533 (Current ENCM491 – Nygren) Real time operating systems  TigerSHARC – ADSP-TS201 (Current ENCM515, ENCM619.23)  Embedded Test Driven Development Environment (E-TDD) Blackfin, TigerSHARC, SHARC, Microsoft studio Find at http://www.enel.ucalgary.ca/People/Smith/ ECE-ADI-Project/Index/index.htm

21. 21 / 26 Laboratory 1 – Written in C++ Review of interrupts Set up light sensor to come in on TigerSHARC FLAG? Line.  Use internal timer to read values – WAIT TILL READY approach to check when light output sensor changes. Set up light sensor to come in on TigerSHARC IRQ? Line  Read internal timer each time interrupt occurs, Interrupt approach to check when light output sensor changes. Timing data stored in an array – convert to frequency – light intensity Develop correlation algorithm -- 6 lines of code in C++  Done in time domain Use highly custom TigerSHARC FFT algorithm to do correlation  Done in frequency domain  Understand how FFT uses TigerSHARC architecture “later in the course” Use results to find heart beat – output information.

22. 22 / 31 Standard development method Waterfall method Heavy on documentation, light on testing TLD -- IDAA Test Last Development (if done at all)

23. 23 / 26 TESTS EXPRESS DESIGN INTENT TDD approach to develop C++ code CUSTOMER DEVELOPER Work with customer to check that the TESTS PROPERLY EXPRESS WHAT CUSTOME WANTS DONE Iterative process with customer “heavily involved” – “Agile” methodology.

24. Some embedded stuff on test driven development in the literature Examine in more detail as part of “individual” presentation? 24 / 26

25. 25 / 26 Rule #1 of assembly code programming Don’t use assembly code programming What speed improvements occur when you turn on the “C++ optimizer” – use Embedded Unit “Timing features”? Later, NOT IN THIS LAB, we will look at the code in detail to understand how the compiler is taking advantage of TigerSHARC processor to get code optimization.  For now we will “look” at that code and say “oh my!” Speed improvements when we use the “C++” optimizer

26. 26 / 26 Concepts tackled Differences between “processor” and “evaluation board” Functionality present on TigerSHARC evaluation board Software development process  Waterfall versus “Agile” lifecycle Concepts behind Lab. 1  Simply a simply C++ framework to “get some (non- trivial) data” for the TigerSHARC to process