1. Chapter 2 part 2

2. Computer Processing Speeds Milliseconds - thousands of a second Microseconds - millionths of a second Nanoseconds - billionths of a second Picosecond - trillionths of a second MIPS - millions of instructions per second MHz - megahertz - millions of cycles per second

3. Speed factors Size of circuit paths (system buss) that connect internal components of a microprocessor Processing registers Memory cache Specialized co-processors

4. Peripheral Devices Necessary for input, output, storage Must be linked in some manner to the cpu Interface technology has yielded simpler more usable devices Mice, touch screens, light pens, voice Work with graphical user interface to allow easier access

5. Printed Output Inkjet printers - spray ink on page one line at a time. Low cost, quiet, versatile. Laser printers - Electrostatic process similar to a photocopy. Higher cost, faster, multi- purpose

6. Storage Trends VLSI - Very large scale integration. This allows more processing power in smaller processors Secondary storage getting cheaper for more capacity

7. Computer Storage Fundamentals Binary representation bit - Smallest level of a data element byte - a grouping of bits Two common types of bit arrangement –ASCII –EBCDIC

8. CONT. Storage capacities are measured in two general forms –Kilobytes - KB - one thousand bytes –Megabytes - MB - one million bytes –Gigabyte - GB - one billion bytes –Terabyte - TB - one trillion bytes

9. Media Access Two methods for accessing data or information stored on some type of media –Direct Access - Method used when the primary storage media is semiconductor (RAM), or direct access storage device (DASD). Direct Access and Random Access can be used interchangeably –In direct access, there is a unique identifier (address) that allows nearly immediate access

10. Media Access cont The second access method is Sequential Access –Associated with a slower retrieval of desired information or data. –Mediums are magnetic tape, digital audio tape, etc. –Records are stored one after the other and must be retrieved in order of storage

11. Semiconductor Memory Benefits to semiconductor memory are numerous Physically small Fast Resistant to temperatures There is one major disadvantage to this type of memory

12. Semiconductor Memory cont Semiconductor memory only works when uninterrupted power is being supplied Volatility is the main concern when relying on this type of memory Two basic forms for Semiconductor memory

13. Types of Semiconductor Memory RAM - Random Access Memory - Most widely used primary storage medium - this is considered “Read/Write memory” ROM - Read Only Memory - Can be read but not erased or overwritten - there are some variations that allow contrary actions

14. Magnetic Disk Storage Floppy disks - polyester film covered with iron oxide. Contained in a hard cover. Can be erased, saved multiple times. Generally have a capacity of 1.44 megabytes Hard Disk drives - Sealed module containing a disk, controller, read head. Can have a large range of capacity sizes from 520megabytes to several gigabytes

15. Magnetic Disk Storage cont RAID - Redundant Array of Independent Disks - multiple hard disks that provide fault tolerance and high capacity.

16. Magnetic Tape Still used as a form of permanent storage Generally used as ‘back up’ for more easily accessed media

17. Optical Storage Medium that requires an electronic read eye (laser) that reads encoding on a plastic disk High storage capacity Quick access (but less than RAM)

18. Optical Storage types CD-ROM - Capable of storing 600 megabytes on a single disk. Cannot be erased or overwritten CD-R - Compact Disk Recordable - Allows for disks to be encoded once using a special CD-R device (drive) CD-RW - Compact Disk rewritable - Can be overwritten using special drive

19. Optical Disk cont DVD - Digital Video Disk - can hold 3 to 8.5 gigabytes on a single disk WORM - Write Once Read Many - similar to CD-R

20. The End Of chapter 2 at least………………..