Presentation is loading. Please wait.

Presentation is loading. Please wait.

Using Desire to Learn (D2L) Course Syllabus Due dates Course contents Email Assignments: Upload through Desire to Learn (D2L) – Case Studies.

Published byLillian Holland Modified over 8 years ago

Similar presentations

Presentation on theme: "Using Desire to Learn (D2L) Course Syllabus Due dates Course contents Email Assignments: Upload through Desire to Learn (D2L) – Case Studies."— Presentation transcript:

1 Using Desire to Learn (D2L) Course Syllabus Due dates Course contents Email Assignments: Upload through Desire to Learn (D2L) – Case Studies

2 Heat Transfer Conduction – What is a “k” value? Convection Radiation

3 Heat Transfer What would conduction, convection, and radiation have to do with fires and build design?

4 Combustion What is required for combustion to occur? What are the different classes of fuels? How can you use the different classes of fuels to prevent or extinguish fires?

5 Products of Combustion What are the major products of combustion?

6 Flame Spread Describe the implications of flame spread involving materials and interior finishes and life safety How do they determine flame spread of materials? Are there any “regulations” with regards to flame spread and materials?

7 NFPA 10 Standard for Portable Fire Extinguishers – Selection – Placement – Installation, Maintenance, Inspection – Hydrostatic Testing

8 OSHA Standards 1910.157: Portable Fire Extinguishers

Download ppt "Using Desire to Learn (D2L) Course Syllabus Due dates Course contents Email Assignments: Upload through Desire to Learn (D2L) – Case Studies."

Similar presentations

Three Types of Heat Transfer

Three Types of Heat Transfer
NFPA 10 Changes & Extinguisher Maintenance Definitions: – Clean agent – Maintenance – 30 day inspections.

NFPA 10 Changes & Extinguisher Maintenance Definitions: – Clean agent – Maintenance – 30 day inspections.
By Ryan C., Jack W. and Hannah S.. Conduction is heat getting transferred.

By Ryan C., Jack W. and Hannah S.. Conduction is heat getting transferred.
Fire Protection OSHA Part 1910 Subpart L.

Fire Protection OSHA Part 1910 Subpart L.
Heat is transferred in 3 ways: Conduction – touching the heat source Convection – being warmed by the heat coming in waves Radiation – being warmed by.

Heat is transferred in 3 ways: Conduction – touching the heat source Convection – being warmed by the heat coming in waves Radiation – being warmed by.
Building Construction A fire resistive rating (FRR) is given in minutes or hours and relates to how long it takes to burn through a given material. Expressions.

Building Construction A fire resistive rating (FRR) is given in minutes or hours and relates to how long it takes to burn through a given material. Expressions.
Fire Behaviour Chemistry of Combustion. Aim To provide students with information to give them an understanding of the behaviour of fire.

Fire Behaviour Chemistry of Combustion. Aim To provide students with information to give them an understanding of the behaviour of fire.
Fire Triangle FuelHeat Fire! Oxygen 1 st Stage: Incipient 1 st stage No visible flame Little smoke Is not yet self-sustaining According to the National.

Fire Triangle FuelHeat Fire! Oxygen 1 st Stage: Incipient 1 st stage No visible flame Little smoke Is not yet self-sustaining According to the National.
Site Planning and Layout  In the design phase of a facility, fire protection requirements are considered in the site layout  Water supply, traffic and.

Site Planning and Layout  In the design phase of a facility, fire protection requirements are considered in the site layout  Water supply, traffic and.
Roasting Marshmallow Heat Transfer Merritt, Stevie, Shade.

Roasting Marshmallow Heat Transfer Merritt, Stevie, Shade.
Fire Safety. The Stats Fire death statistics 1986-95 throughout the united states –2.1 Million Fires Reported Per Year –5,100 Average Civilian Deaths.

Fire Safety. The Stats Fire death statistics throughout the united states –2.1 Million Fires Reported Per Year –5,100 Average Civilian Deaths.
1. Introduction 1.1. Fire program management involves the identification, evaluation, and control of hazards which may result in a fire. 1.2. OSHA & Emergency.

1. Introduction 1.1. Fire program management involves the identification, evaluation, and control of hazards which may result in a fire OSHA & Emergency.
Welding, Subpart J OSHA 500 Course. Critical Hazards n Heat is a source of ignition in the various welding processes n Welding fumes can become a health.

Welding, Subpart J OSHA 500 Course. Critical Hazards n Heat is a source of ignition in the various welding processes n Welding fumes can become a health.
Heat Transfer.

Heat Transfer.
“Fire Extinguishers”.

“Fire Extinguishers”.
Fire prevention. All fires need fuel, air, and heat to spread 1a.

Fire prevention. All fires need fuel, air, and heat to spread 1a.
2012 International Fire Code Adopted as the minimum fire safety standard by the State of Wyoming City of Sheridan must adopt the minimum standard to retain.

2012 International Fire Code Adopted as the minimum fire safety standard by the State of Wyoming City of Sheridan must adopt the minimum standard to retain.
Fire Protection John Giefer. Statistics In the Drilling Industry In the Drilling Industry 25% of all inspections found violations of 1910.157 (21 inspections.

Fire Protection John Giefer. Statistics In the Drilling Industry In the Drilling Industry 25% of all inspections found violations of (21 inspections.
Control Rooms  Serve as operations centers for the control and monitoring of a service or process  Flight control rooms  Power generation control rooms.

Control Rooms  Serve as operations centers for the control and monitoring of a service or process  Flight control rooms  Power generation control rooms.
16.2: Heat and Thermodynamics

16.2: Heat and Thermodynamics

Similar presentations

Ads by Google