1. HYPACK MAX Training Seminar 2004 1 Advanced Survey Topics Multivessel & Specialty Drivers Demonstrations of operating with more than one vessel & specialty device drivers.

2. HYPACK MAX Training Seminar 2004 2 Case 9.a. Multiple Vessel Overview Setting up a demonstration with four vessels. PROJECT: SAMPLE SPECIAL SURVEY 2004 Configuration: FourBoat.INI

3. HYPACK MAX Training Seminar 2004 3 Remember This? Start HYPACK HARDWARE Click ‘Add Device’ Select Device Driver Specify Device Type Specify Options Recording Info Connection Info Specify Offsets Range/Az or Range/Range? Specify Station Coordinates Specific Device Setup More Devices? No Yes Yes More than 1 Vessel? Add Each Vessel Assign Devices To Vessels Test Each Device By Itself Test All Devices At Once StartSURVEY Device Driver Setup Multiple Vessel Device Testing Yes No No Case 9.a Case 5.c It’s time to learn how to set up multiple vessels!

4. HYPACK MAX Training Seminar 2004 4 Simplified… Set up a separate driver for every device on every vessel Add Each Vessel Assign Devices To Vessels Test Each Device By Itself Test All Devices At Once StartSURVEY Device Driver Setup Multiple Vessel Device Testing Case 9.a Case 5.c Hardware Program

5. HYPACK MAX Training Seminar 2004 5 Multiple Vessel Demo Open ‘Sample Special Survey 2004 Project. Open ‘Sample Special Survey 2004 Project. Start HARDWARE. Start HARDWARE. Click ‘File – Open Configuration’. Click ‘File – Open Configuration’. Select FourBoat.INISelect FourBoat.INI Exit HARDWARE. Exit HARDWARE. Start SURVEY. Start SURVEY. Let’s see how we did it. Let’s see how we did it.

6. HYPACK MAX Training Seminar 2004 6 Four Boat Setup - Drivers The first step is to set up all of the device drivers. The first step is to set up all of the device drivers. For our simulation, I have four boats. For our simulation, I have four boats. Boat1:Loop.XYZGENDEVALL.DLLBoat1:Loop.XYZGENDEVALL.DLL Boat2:Loop2.XYZGENDEVALL.DLLBoat2:Loop2.XYZGENDEVALL.DLL Boat3:Loop3.XYZGENDEVALL.DLLBoat3:Loop3.XYZGENDEVALL.DLL Boat4:Loop4.XYZGENDEVALL.DLLBoat4:Loop4.XYZGENDEVALL.DLL For each boat: For each boat: Click ‘Devices - Add Device’Click ‘Devices - Add Device’ Select GENDEVALL.DLL Select GENDEVALL.DLL Set Type to Position, Heading & Depth Set Type to Position, Heading & Depth Click ‘Connect’Click ‘Connect’ Set to ‘Data File’ Set to ‘Data File’ Pick XYZ file as listed above. Pick XYZ file as listed above. Click ‘Setup’Click ‘Setup’ Set as shown. Set as shown. More than 1 Vessel? Add Each Vessel Assign Devices To Vessels Multiple Vessels 11 22 33

7. HYPACK MAX Training Seminar 2004 7 Four Boat Setup: Create Vessels For each additional vessel: For each additional vessel: Click ‘Other Mobiles – Add’Click ‘Other Mobiles – Add’ Enter a name for the vessel.Enter a name for the vessel. Boat 2 Boat 2 Boat 3 Boat 3 Boat 4 Boat 4 Vessel names are added to the Other Mobiles list as your create each one.Vessel names are added to the Other Mobiles list as your create each one. 1 2 3

8. HYPACK MAX Training Seminar 2004 8 Four Boat Setup Assigning Drivers to Vessels Click ‘Other Vessels’ and Vessel Name Click ‘Other Vessels’ and Vessel Name Transfer devices assigned to the vessel by clicking on each device and then clicking the left arrow. Transfer devices assigned to the vessel by clicking on each device and then clicking the left arrow. You can assign multiple devices to each vessel.You can assign multiple devices to each vessel. 1 2 3

9. HYPACK MAX Training Seminar 2004 9 Driver Assignment Check You can check on the driver and vessel assignments by clicking on ‘Devices’. You can check on the driver and vessel assignments by clicking on ‘Devices’. Drivers assigned to any vessel other than the main (default) vessel will show their assignment:Drivers assigned to any vessel other than the main (default) vessel will show their assignment: ‘Device Name’ installed on ‘Vessel Name’ ‘Device Name’ installed on ‘Vessel Name’

10. HYPACK MAX Training Seminar 2004 10 Testing Devices Click ‘Test – Test All’ Click ‘Test – Test All’ Click ‘Window – Tile’ Click ‘Window – Tile’ You should be able to see each driver updating.You should be able to see each driver updating.

11. HYPACK MAX Training Seminar 2004 11 Multiple Vessels in SURVEY The Data Display window contains a complete list of items for each vessel. The Data Display window contains a complete list of items for each vessel. Vessel symbol color = Color of info in Data Display Window Vessel symbol color = Color of info in Data Display Window Right-click on a vessel to assign its symbol color, fill color, track parameters (visible, length, color) and label. Right-click on a vessel to assign its symbol color, fill color, track parameters (visible, length, color) and label.