Presentation is loading. Please wait.

Presentation is loading. Please wait.

Chapter 12: Vibrations and Waves Section 1: Simple harmonic motion Section 2: Measuring simple harmonic motion Section 3: Properties of waves Section 4:

Similar presentations


Presentation on theme: "Chapter 12: Vibrations and Waves Section 1: Simple harmonic motion Section 2: Measuring simple harmonic motion Section 3: Properties of waves Section 4:"— Presentation transcript:

1 Chapter 12: Vibrations and Waves Section 1: Simple harmonic motion Section 2: Measuring simple harmonic motion Section 3: Properties of waves Section 4: Wave interactions

2 Simple harmonic motion  Simple harmonic motion – vibration about an equilibrium position in which a restoring force is proportional to the displacement from equilibrium.  Simple harmonic motion Simple harmonic motion

3 Simple harmonic motion  Hooke’s Law Hooke’s Law F elastic = -kx  Two examples Mass on a spring Pendulum

4 Simple harmonic motion

5 Measuring simple harmonic motion  Amplitude: the maximum displacement from equilibrium.  Period (T): the time it takes to execute a complete cycle of motion.  Frequency (f): the number of cycles of vibration per unit time. f = 1/T or T = 1/f f = 1/T = 1/20s = 0.05Hz

6 Measuring simple harmonic motion  Calculating the Period Simple Pendulum  Calculating the Period Mass on a spring

7 Properties of waves  Two main classifications of waves Electromagnetic (will study later)  Visible light, radio waves, microwaves, and X rays  No medium required Mechanical (will study now): a wave that propagates through a deformable, elastic medium  Must have a medium  Medium: the material through which a disturbance travels

8 Properties of waves  Wave Types Pulse wave: a single, nonperiodic disturbance Periodic wave: a wave whose source is some form of periodic motion  Usually simple harmonic motion  Sine waves describe particles vibrating with simple harmonic motion

9 Properties of waves  Parts of a wave  Crest The highest point above the equilibrium position  Trough The lowest point below the equilibrium  Wavelength The distance between two adjacent similar points of the wave, such as crest to crest.

10 Properties of waves  Transverse Transverse A wave whose particles vibrate perpendicularly to the direction of wave motion Examples include: water waves and waves on a string  Longitudinal Longitudinal A wave whose particles vibrate parallel to the direction of wave motion Sometimes called compression waves Examples include: sound waves, earthquakes, electromagnetic waves

11 Properties of waves  Wave speed λ is wavelength  For all electromagnetic waves v = 3.00x10 8 m/s  For sound waves v = 340 m/s (approximately)

12 Wave interactions  Wave interference Constructive interference  Interference in which individual displacements on the same side of the equilibrium position are added together to form the resultant wave.  Add the two amplitudes to get total amplitude of two new waves

13 Wave interactions  Wave interference Destructive interference  Interference in which individual displacements on opposite sides of the equilibrium position are added together to form the resultant wave  Again add the two amplitudes together. The wave on bottom should be negative however.  Wave interference compare Wave interference compare

14 Wave interactions  Reflection Reflection Depends on the boundary

15 Wave interactions  Standing waves (the wave will appear to be standing still) Standing waves A wave pattern that results when two waves of the same frequency, wavelength, and amplitude travel in opposite directions and interfere  Node A point in a standing wave that always undergoes complete destructive interference and therefore is stationary  Antinode A point in a standing wave, halfway between two nodes, at which the largest amplitude occurs.

16 Wave interactions  Standing waves calculations Must be a node at each end of the string  In letter (b) we see that this is ½ a wavelength. Thus for the first standing wave, the wavelength equals 2L  In letter (c) we see a complete wavelength. Thus for the second standing wave, the wavelength equals L  In letter (d) we see 1½ or 3/2 of a wavelength Thus for the third standing wave, the wavelength equals 2/3 L

17 Wave interactions  Practice problem 1 A wave with an amplitude of 1 m interferes with a wave with an amplitude of 0.8 m. What is the largest resultant displacement that may occur?

18 Wave interactions  Practice problem 2 A 5 m long string is stretched and fixed at both ends. What are three wavelengths that will produce standing waves on this string?

19 Wave interactions  Practice problem 3 A wave with an amplitude of 4 m interferes with a wave with an amplitude of 4.1 m. What will be the resulting amplitude if the interference is destructive? If the interference is constructive?


Download ppt "Chapter 12: Vibrations and Waves Section 1: Simple harmonic motion Section 2: Measuring simple harmonic motion Section 3: Properties of waves Section 4:"

Similar presentations


Ads by Google