Presentation is loading. Please wait.

Presentation is loading. Please wait.

Work Measurement and Standard Setting

Similar presentations


Presentation on theme: "Work Measurement and Standard Setting"— Presentation transcript:

1 Work Measurement and Standard Setting
MGMT E Operations and Logistics Management Work Measurement and Standard Setting Homework Assignment Due October 30th

2 Problem 1 A work operation consisting of three elements has been subjected to a stopwatch time study. The observed times (OTs) are: Job Element ‘A’ = .18 minutes Job Element ‘B’ = .68 minutes Job Element ‘C’ = .50 minutes For a particular worker, the performance ratings are: Job Element ‘A’ = % Job Element ‘B’ = 110 % Job Element ‘C’ = % By union contract, the allowance time for the work operation is: personal time: 5% ; delay: 5% ; fatigue: 10% REQUIREMENT: 1. Determine the standard time for this particular worker.

3 Problem 2 The preliminary work sample of an operation indicates the following: Number of times the operator is observed working: 60 Number of times the operator is observed idle: 40 Total number of preliminary observations: 100 REQUIREMENT: What is the required sample size for a 99.73% confidence level with + / - 4 % precision?

4 Problem 3 At Micro Manufacturing, Inc. workers press semiconductors
into predrilled slots on printed circuit boards. The elemental motions for normal time used by the firm are as follows: Reach 6” for semiconductors…………………….40 TMU Grasp the semiconductor………………………… 10 TMU Move semiconductor to printed circuit board TMU Position semiconductor……………………………35 TMU Press semiconductor into slots…………………..65 TMU Move board aside……………………………………20 TMU Each time measurement unit (TMU) is equal to minutes. REQUIREMENT: Determine the normal time for this operation in minutes and in seconds.

5 Problem 4 Ace Manufacturing Company has just observed a job
in its laboratory in anticipation of releasing the job to the factory for production. The firm wants rather good accuracy for costing and labor forecasting. Specifically, it wants to provide a 99% confidence level and a cycle time that is within 3% of the true value. REQUIREMENT: 1. How many observations should it make? The data collected so far are as follows: Observation Time


Download ppt "Work Measurement and Standard Setting"

Similar presentations


Ads by Google