1. APPLICATION OF DIFFERENTIATION AND INTEGRATION
CHAPTER 4
APPLICATION OF DIFFERENTIATION AND INTEGRATION

2. APPLICATION OF DIFFERENTIATION

3. DISPLACEMENT, VELOCITY AND ACCELERATION
Derivatives are used to analyze the motion of an object in a straight line.
If t of x is the displacement of moving object from a fixed plane and t is time, then
Velocity: A rate of change of s with respect to t.
Acceleration: The rate of change of velocity (or speed) with respect to time.

4. Example 1:
A particle is moving in straight line and its distance, s, in metres from a fixed point in the line after t seconds is given by the equation, Find velocity and acceleration of particle after 3 seconds.
Solution:
displacement
velocity
acceleration

5. EXERCISE
Find the velocity of an object at any time t, given that its acceleration is with t = 2, given the initial velocity is 0. Ans : 40m/s
The height of a pebble dropped off a building at time t = 0 is at time t. The pebble strikes the ground at t = 3 seconds. What is the acceleration and velocity when its strikes the ground. Ans : v = m/s,
Suppose that denotes the position of a bus at time t. Find the velocity and acceleration.
Ans :

6. Related rates
Related rates means related rates of change, and since rates of change are derivatives, related rates really means related derivatives.
Process of finding a rate which a quantity changes by relating that quantity to other quantities.
Rate changes usually respect to time, t.
Procedure for Solving Related Rates Problems:
Draw a figure (if appropriate) and assign variables.
Find a formula relating the variables.
Use implicit differentiation to find how the rates are related.
Substitute any given numerical information into the equation in step 3 to find the desired rate of change.

7. Example (The Falling Ladder) :
A ladder is sliding down along a vertical wall. If the ladder is 10 metres long and the top is slipping at the constant rate of 10m/s, how fast is the bottom of the ladder moving along the ground when the bottom is 6 metres from the wall?

8. z y x

9. Example (Shrinking Balloon):
Gas is escaping from a spherical balloon at the rate of 2 cubes feet per minute. How fast is the surface area shrinking when the radius of the balloon is 12 feet?

10. shrinking

11. Example (Circular Cone) :
A water tank has the shape of an inverted circular cone with base radius 2m and height 4m. If water is being pumped into the tank at the rate of , find the rate at which the water is rising when the water is 3m deep.
Given : rate at which volume of water is being increased in the tank
Unknown : Rate at which the height of water changing.

13. Example (Cylinder): Suppose a right circular cylinder’s radius is expanding at the rate of 0.5cm/sec while its height is shrinking at the rate of 0.8cm/sec. How fast is the cylinder’s volume changing when its radius is 3cm and its height is 2 cm?

14. Exercise
1. A basin has the shape of inverted cone with altitude 100 cm and radius at the top of 50 cm. Water is poured into the basin at the constant rate of 40 cubic cm/minute. At the instant when the volume of water in the basin is cubic centimetres, find the rate at which the level of water is rising. Ans :0.1572cm/min

15. 2. The radius of a right circular cylinder is increasing at a rate of 2 in/min and the height is decreasing at a rate of 3 inch/min. At what rate is the volume changing when the radius is 8 inches and the height is 12 inches? Is the volume increase or decrease? Ans : 3. Gas escaping from a spherical balloon at the rate of How fast is the surface area changing when the radius is 14ft? Ans :

16. Sketching the graph
Example :Sketch the curve and find the points on the graph function
Find the stationary points,
Do first derivative test
Inflexion point,
Interval x
Sign
Conlcusion

17. 4. Second derivative test : 5. Finding maximum and minimum points
4. Second derivative test : 5. Finding maximum and minimum points *Equation using the inflexion, points of x take from stationary points.
Interval x
Sign
Conclusion

18. Exercise
Find the stationary point on the graph of the function below: Hence sketch the graph.

19. Area of region Area of a Region Bounded by the Curve and the Axis
1. Area under a curve – region bounded by the given function, vertical lines and the x- axis.

20. Steps in calculating the area under the curve f(x) : Sketch the area.
Determine the boundaries a and b.
Set up the definite integral.
Integrate.

21. Example :
Calculate the area bounded by and the x-axis.
Solutions :

22. 2. Determine a and b
Therefore the boundaries are a = 0 and b = 4.
3. Set up integral

23. 2. Area under a curve – given function, region bounded by the horizontal lines and the y – axis. Example : Find the area of region enclosed by Solutions : Transform f (x) to g (y)

24. Finding a and b
Integral

25. 3. Area between two curves
Universal formula for finding the area between two curves:
Using the vertical elements:
Using the horizontal elements:

26. Case 1
Case 2

27. Example :
Find the area of region enclosed by the following curves :
Solutions :
Sketch the graph
Intersection points (Finding a and b)

29. EXERCISES Find the area of region bounded by the given curves, Ans :
Calculate the area of segment from curve

30. 3. Find the area bounded by following curves : Ans :

31. volume
It is important whether you can visualize the whole solid. You just need to know what happen to a typical slice when you rotate it.
When rotate the typical slice, then will get two shapes :
- disk (volume, where r is the radius
Washer (volume, where R is the outer radius and r is the inner radius.
Volume Solid Generated by Region Bounded by the Curve and the Axis

32. Example : Find the volume of solid formed by the area bounded by the curves from x = 0 to x = 2 about the x – axis. Solution :

33. Example : Find the volume of solid formed by the area bounded by curves Solution :

34. Volume of Solid Generated by Region Bounded by the Two Curve
Revolving R about the x – axis
Revolving R about the y - axis

35. Example :
Calculate the volume of solid formed when the area bounded by the curves
Solution :
Sketch the graph.
Intersection point

36. 3. Integrate

37. Exercise
Calculate the volume of solid formed when the area bounded by the curves which is revolving at x-axis.
Ans :
2. Calculate the volume of solid formed when the area bounded by the curves which is revolving at y – axis.