1. Open Discussion 2005 National Pressure Equipment Conference February 9-11, 2005 K. T. Lau, Ph.D., P.Eng. Chief Inspector and Administrator ABSA and Province of Alberta

2. 2005/02/09 2005 NPEC - Open Discussion "Pressure Equipment Safety"2 Welcome and BEST WISHES For a Successful Conference

3. 2005/02/09 2005 NPEC - Open Discussion "Pressure Equipment Safety"3 Pressure Equipment “The story of the pressure vessel industry is the story of all industry and how technology has been harnessed by dedicated people working together”* “The importance of pressure equipment from the time of the industrial revolution through the future cannot be overemphasized”** * L. Puckrin - Foreword of “Pressure Under Control – Celebrating 100 Years of Boiler & Pressure Vessel Safety in Albert” 1997 ** K. Lau - “Pressure Equipment Safety in Canada” - National Board Bulletin Spring 1997

4. 2005/02/09 2005 NPEC - Open Discussion "Pressure Equipment Safety"4 A Brief Look at The Importance of Pressure Equipment to Alberta

5. 2005/02/09 2005 NPEC - Open Discussion "Pressure Equipment Safety"5 Natural Resources linking to Pressure Equipment Alberta, the oil and gas producing province of Canada in 2002 - 70% (oil) & 80% (gas) Over 1/3 of Canadian petrochemical plants and refineries Over 90% of Canadian gas processing facilities Highest per capita of pressure equipment usage in North America

6. 2005/02/09 2005 NPEC - Open Discussion "Pressure Equipment Safety"6 There is a “Cost” “Unfortunately, there is a long history of pressure equipment safety problems. The first technical paper published by England’s Institute of Mechanical Engineers addressed this problem in 1848, and was entitled ‘Boiler Explosion at Dudley’ “Improperly operated or maintained, pressure vessels can fail catastrophically, kill and injure workers and others, and cause extensive damage even if the contents are benign”

7. 2005/02/09 2005 NPEC - Open Discussion "Pressure Equipment Safety"7 Yes, it did happen in Alberta

8. 2005/02/09 2005 NPEC - Open Discussion "Pressure Equipment Safety"8 How can we all help The topic areas of the Conference Regulations and Incidents Welding NDE

9. 2005/02/09 2005 NPEC - Open Discussion "Pressure Equipment Safety"9 The Many Challenges The three areas are only parts of the Overall Equation of Pressure Equipment Safety

10. 2005/02/09 2005 NPEC - Open Discussion "Pressure Equipment Safety"10 The many aspects of Pressure Equipment Safety There are many many aspects to pressure equipment safety You will find various subject matter experts presenting throughout this conference A look at three related subjects of interest

11. 2005/02/09 2005 NPEC - Open Discussion "Pressure Equipment Safety"11 ASME Section VIII Div. 2 Pressure Vessels More Div. 2 manufacturers in Alberta compared with the rest of Canada Long history of use of Div. 2 vessels Largest user-province of Div. 2 vessels in Canada Significant increase of use of Div. 2 vessels in recent years

12. 2005/02/09 2005 NPEC - Open Discussion "Pressure Equipment Safety"12 ASME Section VIII Div. 2 Pressure Vessels All such equipment has fatigue consideration as part of the design Certified “User’s Design Specification” controls the design and construction Operation must be reviewed to comply with design parameters Equipment must be assessed to the same parameters (as highlighted in letter from B. McWhirter of ABSA)

13. 2005/02/09 2005 NPEC - Open Discussion "Pressure Equipment Safety"13 Welders and Welding Examiners Long and proud history and tradition of excellency on welding in Alberta A system emulated by others Reciprocity of acceptance of welders established with other jurisdictions

14. 2005/02/09 2005 NPEC - Open Discussion "Pressure Equipment Safety"14 Welders and Welding Examiners Qualified and registered procedures Competent and qualified welders Proven quality programs Certification of Welding Examiners

15. 2005/02/09 2005 NPEC - Open Discussion "Pressure Equipment Safety"15 NDE Radiography, CC 2235 and ASME VIII Div. 2 Radiography and advancements ASME CC 2235 with the use of UT in place of RT Proposed use of UT in the re-write of ASME VIII Div. 2 to be published in the near future

16. 2005/02/09 2005 NPEC - Open Discussion "Pressure Equipment Safety"16 Pressure Equipment Safety Touched on three areas impacting pressure equipment safety More interesting and enlightening presentations coming next

17. 2005/02/09 2005 NPEC - Open Discussion "Pressure Equipment Safety"17 Where do we go from here ? Together, we can do even better -You look good - -We look good - Lets do it together & Look for a successful conference