Presentation is loading. Please wait.

Presentation is loading. Please wait.

MICRO AIR VEHICLE PROJECT Ryan Goldberg Tiffany Khong Brett Keenan Loryn Chen Harris Benjamin Dani Batlle Erica Edney.

Similar presentations


Presentation on theme: "MICRO AIR VEHICLE PROJECT Ryan Goldberg Tiffany Khong Brett Keenan Loryn Chen Harris Benjamin Dani Batlle Erica Edney."— Presentation transcript:

1 MICRO AIR VEHICLE PROJECT Ryan Goldberg Tiffany Khong Brett Keenan Loryn Chen Harris Benjamin Dani Batlle Erica Edney

2  The GWS Slow Stick is an electric park flyer made by Grand-Wing Servotech. Its simplicity and easy-to-fly characteristics make it a great airplane for beginners. Out of the package, the Slow Stick uses three channels: throttle, elevator, rudder.  Fitted with camera for surveillance

3  To build and test the MAV  Observe safety rules during building and testing  Learn how to assemble objects based on sketches  Learn how to optimize cost when building objects  Learn to create and assemble part on Creo Parametric 1.0  Fly plane (Figure-8 Patterns)

4  Flying Weight:11.9 to 15.5 oz  Fuel Type:Electric  Motor Size:EPS100C or EPS300C Power System  Overall Length:37.6 in  Plane Type: Park Flyers  Power Plant Size :300-400 Electric  Radio:3-channel  Recommended Environment: Outdoor  Wing Loading:3.39 oz/sq ft  Wingspan:36" - 48"

5  Maneuver using rudder and elevator  Front nose tip propeller  Optimal for low altitude  Hollow fuselage

6

7

8

9

10

11  6 Channel Transmitter- $31.70  Brushless Motor- $24.70  6.4 GHz reciever- $9.00  Battery- $6.00  GWS Slow Stick, No Power System- $28.00  ParkZone Night Vapor Trainer- $129.99

12 WEEK12345678910111213141516Task TASK Comp lete? Purchase Trainer ~~~~~~~~ YES Practice with Trainer ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ NO Purchase Parts ~~~~~~~~~ NO Assemble Plane ~~~~~~~~~~~~~~~ NO Preliminary Design ~~~~~~~~~~~~~~~ NO Upload Parts ~~~~~~~~~~~~~~ NO Flight Test Video ~~~~~~~~~~~~~~~~~~~~~~~~ NO Practice with Slowstick ~~~~~~~~~NO Final Presentation/Report ~~~~~~~~~NO

13  The goal of the project was to construct a Micro Air Vehicle based on the GWS Slow Stick Platform, with other parts designed in Creo Parametrics 1.0. A cost analysis and material list preparation made sure that the project followed the design specifications. The goal is to fly as many 8 paths around two pylons seperated by 50’ in 5 minutes.. For this, the plane must take off and land from the ground, be able to fly for the entire 5 minutes without needing to recharge the battery, and must stay within the boundary limits

14  http://www.horizonhobby.com/products/slo w-stick-arf-park-flyer-red-GWS1040#t http://www.horizonhobby.com/products/slo w-stick-arf-park-flyer-red-GWS1040#t  http://www.eagle- rc.com/modelreviews/slowstick.php http://www.eagle- rc.com/modelreviews/slowstick.php  http://www3.towerhobbies.com/cgi- bin/wti0001p?&I=LXHCJ2 http://www3.towerhobbies.com/cgi- bin/wti0001p?&I=LXHCJ2  http://www.rcuniverse.com/magazine/articl e_display.cfm?article_id=75 http://www.rcuniverse.com/magazine/articl e_display.cfm?article_id=75


Download ppt "MICRO AIR VEHICLE PROJECT Ryan Goldberg Tiffany Khong Brett Keenan Loryn Chen Harris Benjamin Dani Batlle Erica Edney."

Similar presentations


Ads by Google