1. TOC-1 ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved. April 28, 2009 Inventory #002598 CFX 12.0 Introduction to CFX

2. CFX 12.0 Introductory Training TOC-2 ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved. April 28, 2009 Inventory #002598 Training Manual Inventory Number: 002598 1 st Edition ANSYS Release: 12.0 Published Date: April 28, 2009 Registered Trademarks: ANSYS ® is a registered trademark of SAS IP Inc. All other product names mentioned in this manual are trademarks or registered trademarks of their respective manufacturers. Disclaimer Notice: This document has been reviewed and approved in accordance with the ANSYS, Inc. Documentation Review and Approval Procedures. “This ANSYS Inc. software product (the Program) and program documentation (Documentation) are furnished by ANSYS, Inc. under an ANSYS Software License Agreement that contains provisions concerning non-disclosure, copying, length and nature of use, warranties, disclaimers and remedies, and other provisions. The Program and Documentation may be used or copied only in accordance with the terms of that License Agreement.” Copyright © 2009 SAS IP, Inc. Proprietary data. Unauthorized use, distribution, or duplication is prohibited. All Rights Reserved.

3. CFX 12.0 Introductory Training TOC-3 ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved. April 28, 2009 Inventory #002598 Training Manual Agenda: Day 1 8:30 – 8:40Welcome 8:40 – 9:00Introduction to CFD 9:00 – 9:45CFX GUI and Workflow Demo 9:45 – 10:45Workshop 1: Mixing Tee 10:45 – 11:00Break 11:00 – 11:45Domains and Boundary Conditions 11:45 – 12:30Workshop 2: NACA Airfoil 12:30 – 1:30Lunch 1:30 – 2:15Workshop 3: Room Study 2:15 – 3:00Solver Settings 3:00 – 3:15Break 3:15 – 4:00Workshop 4: Porous Domains 4:00 – 4:45Post-processing 4:45 – 5:00Review of Day

4. CFX 12.0 Introductory Training TOC-4 ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved. April 28, 2009 Inventory #002598 Training Manual Agenda: Day 2 8:30 – 9:00Interfaces, Sources and AV’s 9:00 – 9:30Transient Flows 9:30 – 10:30Workshop 5: Centrifugal Pump 10:30 – 10:45Break 10:45 – 11:15Turbulence 11:15 – 11:45Heat Transfer 11:45 – 12:15CFX Expression Language 12:15 – 1:15Lunch 1:15 – 2:00Workshop 6: Electronics Cooling 2:00 – 2:45Moving Zones 2:45 – 3:30Workshop 7: Tank Flushing 3:30 – 3:45Break 3:45 – 4:15CCL and Solver.out File 4:15 – 4:45Overview of Advanced Physics 4:45 – 5:00Review of Day

5. CFX 12.0 Introductory Training TOC-5 ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved. April 28, 2009 Inventory #002598 Training Manual Technical Support ANSYS, Inc. and ASDs provide a wide range of technical support, training, and consulting services. – Your Support Provider (ASD): ________________________ Visit www.ansys.com and select the Customer Portal linkwww.ansys.com – Provides access to technical support, software downloads, service packs, knowledge base… – TECS (Technical Enhancements and Customer Support) maintenance is required to obtain support and software updates – Coming soon, search a library of example cases, tutorials, best practice guides… Can also access support through phone / e-mail – Technical Support Phone: ______________________________ – Technical Support Email: ______________________________

6. CFX 12.0 Introductory Training TOC-6 ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved. April 28, 2009 Inventory #002598 Training Manual Customer Portal Registration Visit the Customer Portal and select the “Not yet a member?” link to create an account

7. CFX 12.0 Introductory Training TOC-7 ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved. April 28, 2009 Inventory #002598 Training Manual Manuals The manuals you have contain all of the material presented in the slides and the workshops The files used during the workshops are available on request The lecture appendices contain additional useful topics that will generally not be covered during the training In addition to the seven scheduled workshop, three additional workshops are provided – These can be completed if time is available, or used as alternative workshops