Presentation is loading. Please wait.

Presentation is loading. Please wait.

Click to add Text Automated Worm Fingerprinting Sumeet Singh, Cristian Estan, George Varghese and Stefan Savage Department of Computer Science and Engineering.

Similar presentations


Presentation on theme: "Click to add Text Automated Worm Fingerprinting Sumeet Singh, Cristian Estan, George Varghese and Stefan Savage Department of Computer Science and Engineering."— Presentation transcript:

1 Click to add Text Automated Worm Fingerprinting Sumeet Singh, Cristian Estan, George Varghese and Stefan Savage Department of Computer Science and Engineering University of California, San Diego Presented at : Operating System Design & Implementation (OSDI) 2004 Ramanarayanan Ramani (Ram)

2 Overview Why Automated Systems Detecting Worms Characterize Worms Worm Containment Worm Behavior Identify Worm Signatures Earlybird System Design Statistics Conclusion

3 Why Automated Systems Identify worm – Manually characterize Signature – Update Antivirus & Network filters Code Red worm took 14 hours to infect Slammer took 10 minutes – no time to manually identify signature Need automatic worm signature identification & secure networks

4 Detecting Worms Network Telescopes : Monitor request to large unused, yet routable address space Can Identify random scan worms Cannot identify Hit-list or Email worms Cannot characterize the signature

5 Detecting Worms Using Honeypots Not allow any malicious incoming traffic Unwanted outgoing traffic : may be due to worm : identify malicious code performing this Use malicious code to identify signature Takes long time & requires manual signature identification

6 Detecting Worms Host-based behavioral detection Analyze patterns of system calls. (e.g.) Route Received packet to be sent Identify suspicious activity Expensive to manage Needs to employed in every system separately

7 Characterize Worm Characterization is the process of analyzing and identifying a new worm or exploit Create a priori vulnerability signatures Can only be applied to vulnerabilities that are already well-known and well- characterized manually

8 Characterize Worm First Automated System : Used by IBM for virus Allow to infect “Decoy” programs Identify invariant strings in Infected objects to characterize viruses Assumes the presence of a known instance of a virus and a controlled environment to monitor

9 Characterize Worm Honeycomb system of Kreibich and Crowcroft Host-based intrusion detection system Automatically generates signatures by looking for longest common subsequences among sets of strings found in message exchanges. Very slow

10 Characterize Worm Kim and Karp's Autograph system Autograph also uses network-level data to infer worm signatures Employ Rabin fingerprints to index counters of content substrings Use white-lists to set aside well known false positives Has extensive support for distributed deployments Relies on a pre filtering step that identifies flows with suspicious scanning activity

11 Worm Containment Mechanism used to slow or stop the spread of an active worm Host quarantine String-matching Connection throttling

12 Worm Behavior Behave quite differently from the popular client-server and peer-to-peer applications Have some common behavior patterns across worms – useful to identify and characterize them

13 Worm Behavior Content invariance Some or all of the worm program is invariant across every copy Some worms make use of limited polymorphism - encrypting each worm instance independently and/or randomizing filler text But still some portion is invariant

14 Worm Behavior Content prevalence Worms are designed foremost to spread - the invariant portion of a worm's content will appear frequently on the network as it spreads or attempts to spread

15 Worm Behavior Address dispersion Packets containing a live worm will tend to reflect a variety of different source and destination addresses This range increases when there is a major outbreak

16 Identify Worm Signatures ProcessTrafc(payload,srcIP,dstIP) 1 prevalence[payload]++ 2 Insert(srcIP,dispersion[payload].sources) 3 Insert(dstIP,dispersion[payload].dests) 4 if (prevalence[payload]>PrevalenceTh 5 and size(dispersion[payload].sources)>SrcDispTh 6 and size(dispersion[payload].dests)>DstDispTh) 7 if (payload in knownSignatures) 8 return 9 endif 10 Insert(payload,knownSignatures) 11 NewSignatureAlarm(payload) 12 endif

17 Identify Worm Signature This method is called Content Sifting Too much data to be handled in high speed networks Too many substrings need to be stored Too much time taken to process one packet

18 Earlybird System Design Scan network & process packets Identify repeating substrings along with list of the source & destination If repetition is over threshold, set substring to be signature & ask network security system to block packets with respective signature

19 Estimate Content prevalence Finding the packet payloads that appear at least x times among the N packets sent during a given interval Uses multi-stage filters with conservative update to dramatically reduce the memory footprint of the problem Append the destination port and protocol to the content before hashing Detecting repeating strings with a small fixed length B Compute a variant of Rabin fingerprints for all possible substrings of a certain length Each packet with a payload of s bytes has s - B +1 strings of length, so the memory references used per packet – very high

20 Estimating address dispersion Address dispersion is critical for avoiding false positives Count the distinct source IP addresses and destination IP addresses associated with each piece of content suspected of being generated by a worm Use approximate counting of distinct addresses using Bitmaps Direct Bitmaps : 32-bits. Hash Addresses to One bit and set that bit For a threshold of 30 distinct addresses – 20 bits set Ability to estimate the actual values of each counter is less

21 Estimating address dispersion Earlybird technique – Scaled Bitmaps Accurately estimates address dispersion using five times less memory Sub-sampling the range of the hash space (e.g.) To count up to 64 sources using 32 bits, one might hash sources into a space from 0 to 63 yet only set bits for values that hash between 0 and 31 - ignoring half of the sources We track a continuously increasing count by simply increasing this scaling factor whenever the bitmap is filled

22 Estimating address dispersion Once the bitmap is scaled to a new configuration, the addresses that were active throughout the previous configuration are lost and adjusting for this bias directly can lead to double counting So we use multiple bitmaps to store history – here we use 3

23 Estimating address dispersion

24 UpdateBitmap(IP) 1 code = Hash(IP) 2 level = CountLeadingZeroes(code) 3 bitcode = FirstBits(code << (level+1)) 4 if (level base and level < base+numbmps) 5 SetBit(bitcode,bitmaps[level-base]) 6 if (level == base and CountBitsSet(bitmaps[0]) == max) 7 NextConguration() 8 endif 9 endif ComputeEstimate(bitmaps,base) 1 numIPs=0 2 for i= 0 to numbmps-1 3 numIPs=numIPs+b ln(b/CountBitsNotSet(bitmaps[i])) 4 endfor 5 correction= 2(2^base - 1) / (2^numbmps - 1). b ln(b/(b - max)) 6 return numIPs 2base=(1 – (2 ^ (-numbmps)))+correction

25 CPU scaling Processing each packet payload as a single string is easy But when applying Rabin fingerprints, the processing of every substring of length B can overload the CPU during high traffic load – too much processing A packet with 1,000 bytes of payload and B = 40, requires processing 960 Rabin fingerprints To reduce processing time – sample the packets which are processed Randomly sampling substrings to process could cause us to miss a large fraction of the occurrences of each substring

26 CPU Scaling Instead use value sampling and select only those substrings for which the fingerprint matches a certain pattern – like last six bits are 0 The probability of detecting a worm with a signature of length x Probability of tracking a worm with a signature of 100 bytes is 55%, but for a worm with a signature of 200 bytes it increases to 92%, and for 400 bytes to 99.64%

27 Complete System

28 Program Loop ProcessPacket() 1 InitializeIncrementalHash(payload,payloadLength,dstPort) 2 while (currentHash=GetNextHash()) 3if (currentADEntry=ADEntryMap.Find(currentHash)) 4 UpdateADEntry(currentADEntry,srcIP,dstIP,packetTime) 5 if ( (currentADEntry.srcCount > SrcDispTh) and (currentADEntry.dstCount > DstDispTh) ) 6 ReportAnomalousADEntry(currentADEntry,packet) 7 endif 8 else 9 if ( MsfIncrement(currentHash) > PravalenceTh) 10 newADEntry=InitializeADEntry(srcIP,dstIP,packetTime) 11 ADEntryMap.Insert(currentHash,newADEntry) 12 endif 13 endif 14 endwhile

29 Statistics Implementation is written in C The aggregator also uses the MySql database to log all events Used popular rrd-tools library for graphical reporting PHP scripting for administrative control

30 Content prevalence threshold Using a 60 second measurement interval and a whole packet CRC, over 97 percent of all signatures repeat two or fewer times and 94.5 percent are only observed once Using a finer grained content hash or a longer measurement interval increases these numbers even further

31 Address dispersion threshold After 10 minutes there are over 1000 signatures with a low dispersion threshold of 2 Using a threshold of 30, there are only 5 or 6 prevalent strings meeting the dispersion criteria

32 Garbage Collection When the timeout is set to 100 seconds, then almost 60 percent of all signatures are garbage collected before a subsequent update Using a timeout of 1000 seconds, this number is reduced to roughly 20 percent of signatures

33 Positives Automatic Detection, Characterization & Containment Low processor time consumed Low memory consumption Identify new worms and produce signatures – even E-Mail worms

34 Problems Can’t identify worms with very less or no invariant portion Can use compression modules like zip to confuse Earlybird Vulnerabilities in IPSec, SSL & VPN can’t be secured Attempt to evade our monitor through traditional IDS evasion techniques – like IP spoofing Stealth worm difficult to identify Purposely create worm defense to disallow some service by spreading similar packets

35 Suggestions Uncompress Packets & Identify original contents Need to have system as firewall for Secure protocols Use triggering data across time scales (In paper) or maintain history of slowly repeating data Check working of worm – see if it is really a worm in infected systems

36 Click to add Text Questions


Download ppt "Click to add Text Automated Worm Fingerprinting Sumeet Singh, Cristian Estan, George Varghese and Stefan Savage Department of Computer Science and Engineering."

Similar presentations


Ads by Google