1. FSC402H FORENSIC SCIENCE AND THE EXPERT December 2, 2003

2. Forensic Issues  Continuity  Quality Assurance  Accreditation  Expert Testimony

3. Continuity Continuity, Chain of Custody The procedures in place that account for the integrity, identification, and security of each specimen by tracking its handling and storage from its receipt to final disposition.

4. Continuity  Seals  Secure  Identity  Security  In transit  In storage  Receipt  Disposition

5. Continuity  Seals  Secure  Prevents tampering of the item  Provides a unique identifier of the item  Identity  Provides a unique identifier of the item

6. Continuity  Security  In transit  transferred from site to site by a staff member  transfer between areas (eg. CRO to toxicology) is from staff member to staff member  In storage  locked rooms  sealed containers

7. Continuity  Receipt * Record all information*  signs of tampering  item type, seal type, identifier #, attribution  initiate chain of custody  dates  initials  placement of integrity seals if not present

8. Continuity Disposition  disposal – biological samples  return to submitter – non-biologicals  under secure seal * MUST BE RECORDED

9. Quality Assurance  Those planned and systematic actions necessary to provide sufficient confidence that a laboratory's product or service will satisfy given requirements for quality.  Lab wide  Whole system

10. Quality Assurance Quality Control  Internal activities or activities according to externally established standards used to monitor the quality of analytical data and to ensure that it satisfies specified criteria.  e.g. quality control standard – a standard of known concentration to be tested in the method in question  may be internal or external

11. Quality Assurance Includes:  Use of validated procedures  Review of all results and reports  technical  administrative  Accreditation  Continuing Education

12. Quality Assurance Includes:  Use of proficiency testing  Comparative testing - analytical  Internal quality control samples - analytical  External quality control samples - analytical  Evaluation of Scientist  expert testimony  evaluation of reports

13. Quality Assurance Validation of Technical Procedures Quantitative ProceduresQualitative Procedures- specificity - accuracy - precision - linear range - limit of quantitation- limit of detection- ruggedness

14. Quality Assurance Specificity  ability to measure analyte in the presence of other compounds expected to be found in the matrix Ruggedness  can the method be duplicated  different days  different individuals

15. Quality Assurance Accuracy  closeness to the true value or expected value Precision  closeness to each other

16. Quality Assurance Limit of Quantification  lowest value accurately and precisely measured Limit of Detection  lowest value that can be distinguished from from background Linear Range  range over which standard curve is accurately and precisely linear

17. Accreditation PURPOSE To demonstrate that an organization has policies in place to  Assure quality  Detect deficiencies  Take corrective action

18. Accreditation PURPOSE To demonstrate that an organization’s management, operations, personnel, procedures, equipment, physical plant, security and health and safety procedures meet established standards

19. Accreditation SAY WHAT YOU DO DO WHAT YOU SAY

20. Accreditation ASCLD/LAB American Society of Crime Laboratory Directors Laboratory Accreditation Board

21. Accreditation  100% Essential  e.g. written or secure electronic chain of custody  70% Important  e.g. existence of a quality manual  50% Desired  e.g. general cleanliness/good housekeeping

22. The Expert Witness