1. Computer Systems TexPREP Summer Camp Computer Science

2. All those parts of a computer that you can see and touch. Programs (set of instructions) and data. Computer System Hardware Computer System Software www.coolnerds.com/Newbies/Hardware/hardware.htm

3. Hardware http://www.antonine-education.co.uk/ict_as/ict_module_2/topic_8/computer_architecture.htm Computer

4. Hardware The two most important components of a computer are: computer CPU: Central Processing Unit Memory: typically RAM (Random Access Memory) They are connected by the system bus and are located on the motherboard.system busmotherboard

5. CPU The CPU is the “brain” of the computer.CPU It gets an instruction from main memory and then executes it. If the instruction needs some data, it gets the data from main memory in order to process it. After executing the instruction, if there is a result that needs to be saved, it stores the result on main memory. These steps are repeated for each instruction in the program. The speed of the processor is expressed in Gigahertz (GHz).

6. Memory There are different types of memory in a computer system. Main memory (RAM): where programs and data must be loaded in order to be processed. Main memoryRAM ROM: where the boot (startup) program is stored. ROM Cache: very high speed memory used to improve the performance of the system. Cache The amount of memory is typically expressed in Megabytes (MB), Gigabytes (GB), or Terabytes (TB). RAM and Cache are volatile, that is, they lose their content when the power is turned off. ROM is not volatile. Their access time is in the order of nanoseconds (0.000000001 seconds)access time

7. System Clock The components of the computer must interact in a synchronized way. A system clock is used to control the timing of all computer operations.system clock It generates regular “ticks” (electronic pulses) that set the operating pace of the components. Its speed is expressed in Megahertz (MHz) or Gigahertz (GHz).

8. Peripheral devices Storage devices: used to store data and programs permanently (non volatile). For example: hard drive, flash drive, cd drive, etc. Storage devices Input devices: used to enter data and instructions (programs, commands, etc.) into the computer. For example: keyboard, mouse, microphone, scanner, etc. Input devices Output devices: used to get information from the computer. For example: monitor, printer, speakers, etc. Output devices

9. Storage devices The three main technologies are: Magnetic: used on hard disks, tape, etc. Magnetic Optical: used on CDs (ROM, R, RW), DVDs (R, RW, RAM), etc. Optical Solid state: used on flash drives, memory cards, etc. Solid state

10. Hard drive http://www.pctechguide.com/31HardDisk_Construction.htm

11. laser diode prism light- sensing diode 0 1 lens pitland disc label Optical Discs Discovering Computers 2006, Course Technology, p. 367 Fig. 7-20 Step 1. Laser diode shines a light beam toward disc. Step 2. If light strikes a pit, it scatters. If light strikes a land, it is reflected back toward diode. Step 3. Reflected light is deflected to a light-sensing diode, which sends digital signals of 1 to computer. Absence of reflected light is read as digital signal of 0.

12. Adapter Cards Also known as expansion boards, are used to increase the capabilities of a computer.expansion boards They must be inserted in expansion slots and their respective device drivers installed before they can be accessed by the system. There are different technologies: PCI, AGP, etc.PCIAGP

13. Motherboard http://www.washington.edu/lst/help/computing_fundamentals/troubleshootingxp/hardware

14. Adapter Cards examples video adapters graphics accelerators sound cards accelerator boards NIC - network interface card

15. Graphics Adapter Card http://salestores.com/stores/images/images_747/P65MDDE128LPUF.jpg

16. Units of measurement KILO: 1,000 or 10 3 MEGA: 1,000,000 or 10 6 GIGA: 1,000,000,000 or 10 9 TERA: 1,000,000,000,000 or 10 12

17. Inside the computer… Everything is discrete (digital), not continuous (analog) – i.e, it must be represented using a discrete (number) value Problem: How do we put the analog world “inside” the digital computer? Solution: Devise ways to represent real-world, analog data in digital forms Digital Representation

18. Computers have storage units called binary digits or bits The computer operates with voltage through what amounts to microscopic switches that are either “On” (1) or “Off” (0) Low Voltage = 0 High Voltage = 1 all bits have value 0 or 1 What do computers work with internally?

19. Representing Numbers Binary number system

20. Representing Characters ASCII (American Standard Code for Information Interchange) and Unicode