1. Ecosystem Measurement If you know WHY you’re measuring, then you’ll know WHAT to measure.

2. Types of data abundance density evenness biomass

3. Types of data, continued coverage = proportion or percent of ground covered over by a particular species (i.e. how much shade?)

4. Types of data, continued DBH = diameter at breast height (diameter of trunk at 1.5 m)

5. Types of data, continued dendrology = tree rings Usually collected from core samples Data: age of tree, climate conditions

6. Yikes!! Go out and measure every tree? No way!! Instead you choose an appropriate sampling method.

7. 4 sampling methods: 1. plot 2. transect 3. point-quarter 4. photogrammetry

8. Plot sampling AKA “quadrat” rectangle or square 1 m 2 to 100’s m 2 randomly selected replicated

9. Plot sampling is used to measure plant communities, sessile communities, soil fauna, animal burrows, benthos

10. Types of data from plot sampling species density, evenness, coverage, biomass (in aquatic systems)

11. Transect Sampling (3 types)

12. 1) Belt transect sampling long, narrow strip of terrain same type of data as plot sampling used to study contiguous communities or seres of ecological succession

13. 2) Line-intercept transect straight line through ecosystem (rope or tape-measure) any plant that touches the line is counted or the diameter of plant on line is measured data will give species density, evenness, and coverage

14. 3) Strip census transect The researcher walks on straight line through ecosystem counting visible animals or animal sign e.g. birds, butterflies, roadkill, scat, etc. There are mathematical techniques that will convert data into population densities, etc.

15. .... to review What is a plot sample? What are the 3 types of transect samples?

16. Point-quarter sampling “plotless” method has reliability issues: plants must have random distribution!!!

17. Point-quarter, continued Researcher randomly selects points within ecosystem & marks each with a flag. Each point represents center of compass with 4 quarters (N, W, S, E) quarter = quadrant (not quadrat)

18. Point-quarter, continued In each quarter, measure the distance from center point to center of nearest individual plant Only one plant per quarter is measured Combine the data (if reliable) to find species density, evenness & coverage

19. Photogrammetry “remote sensing”

20. Photogrammetry, continued photos taken from airplanes & matched to GPS digital or infra-red film

21. Photogrammetry is used to identify vegetation, soil & forest types, to measure tree height

22. Photogrammetry is used also for mapping potential tree harvest zones and access roads, for identifying riparian zones, for monitoring stream-channel shifts,

23. and to assess landslide risk, evaluate reforestation progress, and study health of individual trees (leaf density in crown).

24. ... to review Pros & cons of pt-1/4 sampling? Uses of photogrammetry?

25. Why sample? Ecological reasons 1. 2. 3. 4. Economic reasons 5. 6. 7. 8.