Presentation is loading. Please wait.

Presentation is loading. Please wait.

THERMOELECTRICITY. VINCENT ALAN HERAMIZ Introduction & History.

Similar presentations


Presentation on theme: "THERMOELECTRICITY. VINCENT ALAN HERAMIZ Introduction & History."— Presentation transcript:

1 THERMOELECTRICITY

2 VINCENT ALAN HERAMIZ Introduction & History

3 Introduction Early 19th century scientists, Thomas Seebeck and Jean Peltier, first discovered the phenomena that are the basis for today's thermoelectric industry. Seebeck found that if you placed a temperature gradient across the junctions of two dissimilar conductors, electrical current would flow. Peltier, on the other hand, learned that passing current through two dissimilar electrical conductors, caused heat to be either emitted or absorbed at the junction of the materials. It was only after mid-20th Century advancements in semiconductor technology, however, that practical applications for thermoelectric devices became feasible. With modern techniques, we can now produce thermoelectric modules that deliver efficient solid state heat-pumping for both cooling and heating; many of these units can also be used to generate DC power in special circumstances (e.g., conversion of waste heat). New and often elegant uses for thermoelectrics continue to be developed each day.

4 History In 1821 Thomas Johann Seebeck found that a circuit made from two dissimilar metals, with junctions at different temperatures would deflect a compass magnet. Seebeck initially believed this was due to magnetism induced by the temperature difference. However, it was quickly realized that it was an electrical current that is induced, which by Ampere's law deflects the magnet. More specifically, the temperature difference produces an electric potential (voltage) which can drive an electric current in a closed circuit. Today, this is known as the Seebeck effect. Seebeck Seebeck effect

5 History In 1834, a French watchmaker and part time physicist, Jean Charles Athanase Peltier found that an electrical current would produce heating or cooling at the junction of two dissimilar metals. In 1838 Lenz showed that depending on the direction of current flow, heat could be either removed from a junction to freeze water into ice, or by reversing the current, heat can be generated to melt ice. The heat absorbed or created at the junction is proportional to the electrical current. The proportionality constant is known as the Peltier coefficient. Peltier

6 History Twenty years later, William Thomson (later Lord Kelvin) issued a comprehensive explanation of the Seebeck and Peltier Effects and described their interrelationship. The Seebeck and Peltier coefficients are related through thermodynamics. The Peltier coefficient is simply the Seebeck coefficient times absolute temperature. This thermodynamic derivation lead Thomson to predict a third thermoelectric effect, now known as the Thomson effect. In the Thomson effect, heat is absorbed or produced when current flows in a material with a temperature gradient. The heat is proportional to both the electric current and the temperature gradient. The proportionality constant, known as the Thomson coefficient is related by thermodynamics to the Seebeck coefficient.

7 Introductory Video …to explain things further…


Download ppt "THERMOELECTRICITY. VINCENT ALAN HERAMIZ Introduction & History."

Similar presentations


Ads by Google