1. Yokogawa Indonesia ＜ Document Number> Copyright © 2004, Yokogawa Indonesia ACCREDITATION OF CALIBRATION LABORATORY STANDARD LAB CENTER

2. Copyright © 2004, Yokogawa Indonesia YIN-CMK Accreditation Definition Approve officially by a national accreditation body to fulfill conformity with some regulation For test and calibration laboratory must fulfill ISO/IEC 17025-1999 or SNI 19-17025-2000 “Persyaratan Umum Kompetensi Laboratorium Pengujian dan Kalibrasi”

3. Copyright © 2004, Yokogawa Indonesia YIN-CMK Aim Increase reliability and competency of an organization to operate management system and laboratory technical competence To get national or international approval (publish a certificate)

4. Copyright © 2004, Yokogawa Indonesia YIN-CMK NATIONAL ACCREDITATION BODY OF INDONESIA Assist National Standardization Agency of Indonesia (BSN) Function : to accredit testing/calibration laboratories, certification bodies, technical inspection bodies and other accreditation in the field of standardization Actively participates in APLAC, ILAC, APMP, IAF, PAC, etc

5. Copyright © 2004, Yokogawa Indonesia YIN-CMK ISO/IEC 17025 : 1999 1Scope 2Normative references 3Terms and definitions 4Management requirements 4.1Organization and management 4.2Quality system 4.3Document control 4.4Request, tender and contract review 4.5Sub-contracting of tests and calibrations 4.6Purchasing services and supplies 4.7Service to the client 4.8Complaints 4.9Control of nonconforming testing and/or calibration work 4.10Corrective action 4.11Preventive action 4.12Records 4.13Internal audits 4.14Management reviews

6. Copyright © 2004, Yokogawa Indonesia YIN-CMK ISO/IEC 17025 : 1999 5. Technical requirements 5.1General 5.2Personnel 5.3Accommodation and environmental conditions 5.4Test and calibration methods including sampling 5.5Equipment 5.6Measurement traceability 5.7Sampling 5.8Handling and transportation of test and calibration items 5.9Assuring the quality of test and calibration results 5.10Reporting the results

7. Copyright © 2004, Yokogawa Indonesia YIN-CMK Who can be accredited by KAN ? Testing/Calibration laboratories who meet these requirements : has law legacy satisfy the terms and condition for laboratory which are issued by KAN willing to pay accreditation fee to KAN

8. Copyright © 2004, Yokogawa Indonesia YIN-CMK Accreditation Requirements Testing/calibration laboratory must fulfill these requirement :  has Quality Management System and technical competence, which comply with SNI 19-17025-2000 or ISO/IEC 17025-1999  comply with the procedure and condition, which is published by KAN  has joined inter-laboratory comparison test which is managed by KAN or other institution that has good reputation in managing inter-laboratory comparison program

9. Copyright © 2004, Yokogawa Indonesia YIN-CMK Assessment Assessment is consist of two stage, that is :  Sufficiency Audit  Field Assessment Assessment is conducted by two or more assessor, that is :  Head of Assessor  Technical Assessors

10. Copyright © 2004, Yokogawa Indonesia YIN-CMK Field Assessment  Assessor will assess laboratory’s management system and technical competence  Assessor will give non-conformities report which has agreed by both side  Laboratory will make corrective action report at least 3 months after assessment

11. Copyright © 2004, Yokogawa Indonesia YIN-CMK Non-Conformities 1 st Category ‘very serious’ non-conformities 2 nd Category ‘less serious’ non-conformities 3 rd Category ‘minor’ non-conformities

12. Copyright © 2004, Yokogawa Indonesia YIN-CMK Accreditation  All assessment report will be investigated by Technical Committee  Investigation report will be reviewed in KAN’s meeting.  KAN’s meeting will decide whether to accept the laboratory accreditation or not

13. Copyright © 2004, Yokogawa Indonesia YIN-CMK ACCREDITATION PERIOD Accreditation Certificate Validity is until 4 years Six month before the certificate un-valid, laboratory must be re-accredited by KAN

14. Copyright © 2004, Yokogawa Indonesia YIN-CMK Surveillance  KAN will survey the laboratory to make sure that laboratory competence is still appropriate with KAN accreditation criteria  Surveillance is perform twice during the accreditation validity

15. Copyright © 2004, Yokogawa Indonesia YIN-CMK REVOCATION OF ACCREDITATION Revocation of Laboratory Accreditation can happen if :  Laboratory fail in surveillance program  There’s non-conformity in category 1  Correction report can’t be done in time  Laboratory has break the terms and condition of KAN Accreditation criteria  Laboratory still published certificate, scope not accredited by KAN, with KAN’s logo on it

16. Copyright © 2004, Yokogawa Indonesia YIN-CMK THE END STANDARD LAB CENTER YOKOGAWA INDONESIA WISMA ALDIRON DIRGANTARA 2 ND FLOOR, SUITE 202-209 AND 231-238 JL. JEND. GATOT SUBROTO KAV.72 JAKARTA 12780