1. G-IDSS Global Isuzu Diagnostic Service System

2. Background of G-IDSS Adoption
Necessity of Isuzu Own Scan Tool for the Next Term
GM decided to develop a PC-based scan tool. As a result, Tech2 does not have a priority for further development. Also, the development of the PC-based scan tool is slow and Isuzu cannot depend on their development schedule.
→ Discontinuation of GM joint development
Adoption of electronic control devices much accelerated for enhanced emission control and safety control.
→ Higher skill level is required for repairing.
Numbers of scan tool and other surrounding device are required due to high performance control module protocols and OEM vehicles.
New Scan Tool ⇒ evolving to the overall service tool
Carry-over of current functions: Tech 2 functions (data display, data download & upload, programming)
Connection to internet: Data correction & information distribution
Linking with manuals
MIMAMORI/ DRM data downloading & analyzing
Others……….

3. Changes of Scan Tool and Related Equipments
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
Tech 1 →
Checker Ⅲ
Tech 2 ☆
32MB card
TIS2000
SPS
24V adopter (THA-1)
24V adaptor (THA-10)
CAN-di module
NA-IDSS
G-IDSS
CSS-NET

4. G-IDSS Functions
Diagnostics of each system => Equivalent or enhanced as compared to Tech 2
Programming of control modules => Equivalent to SPS
Download of Mimamori/ DRM data
Wiring diagram: ETM (Electrical Troubleshooting Manual)
Linking between scan tools and workshop manuals
Latest data distribution by updating software via the internet
<For Future Development>
Wireless connection between interface box and PC
Electrical service bulletin
Remote repair support
Dealer management system
Wireless PC
Server
Internet
USB cable or LAN
Interface box
Smart Cable

5. Connections & Communication
Download cable for DRM
G-IDSS server
G-IDSS installed PC
RS232 cable for BCM
Smart cable
USB cable, wired LAN or wireless LAN
Interface box
C&E and Bus (internal parts of THA-1)

6. (except shipping charge)
Prices
Items
Remarks
Price
Notebook PC
Purchased separately.
Interface box
Data convertor between vehicle and PC.
\133,000
(except shipping charge)
Smart cable
DLC cable
USB cable
Cable between PC and interface box
Annual license fee
By order form
\ 100,000/ year (CV or TF)
\ 120,000/ year (CV & TF)
Interface box: \126,000
Smart cable: \6,500
USB cable: \500

7. Required specification Recommended specification
Required PC Spec./ Recommended PC Spec.
Required specification
Recommended specification
CPU
Intel/ AMD Single core 1GHz or higher
Dual core 2GHz or higher
Memory
512 MB or higher
2GB or higher
Wireless function
Not available
Available (802.11b/g)
Monitor
1024 x 768 (XGA) or larger 
HD drive
40 GB or higher
80 GB or higher
DVD drive
External drive can be connected OS
Windows XP or newer
PC type
Normal laptop PC
Solidly-built laptop PC
(NEC ShieldPRO/ Panasonic Toughbook/ Dell Latitude E6400)

8. Internet Environments
Access to the Internet is necessary to use G-IDSS.
Web authentication is required for G-IDSS installation (The serial numbers of PC and G-IDSS have to be registered with the G-IDSS server first, and then G-IDSS can be started and used.)
Web authentication is required for control module programming. (hardware key function)
Updating G-IDSS to reflect the latest data
Availability of the latest data by regular update
Addition of production vehicle data
Addition and changes in service data, such as workshop manuals
Addition and changes in scan tool software
Update of ECU software
Update of G-IDSS software
Update of interface box software

9. Interface Box Communication between PC and interface box
Wired (USB or Ethernet)
WiFi ( b/g)
Communication between interface box and vehicle
16 pins DLC connection cable (12V or 24V)
3/10/20 pins connector connection cable (C&E, Bus)
Others
Auxiliary power input (DC12 or 24V)
Physical size
130 x 190 x 45 (mm)

10. Programming power output (currently unused) Trigger and RS232 debug
AUX power input 12/24V
Wireless antenna
Protocol Tx and Rx communication
USB detection
Heartbeat blink
USB port
LAN cable port
Smart cable port
Firmware debugging only
Wired Ethernet power
Wired Ethernet communication
Protocol connected
Unused

11. Smart Cable DLC Cable between interface box and vehicle
24V adaptor is unnecessary
3/10/20 pins connector (internal parts of THA-1) can be connected.
Some protocols (NRZ for kick-drive & cab air suspension) can be switched automatically. (Function of THA-1)

12. G-IDSS Installation Instructions
NOTE: Logon your PC with administrator privileges before installing the IDSS.
Insert the Isuzu Diagnostic Service System (IDSS) SETUP DISC into the DVD drive on the PC.
NOTE: The IDSS DVD has a feature that will begin the installation process upon inserting the DVD in the DVD Drive.
2. You will be reminded to ensure the IDSS Interface Device is not connected to the PC during installation.
3. Follow the on screen installation instructions.
Language selection screen
Preparing setup screen
G-IDSSを使用するPCのスペックは市販のPCであれば、十分に使用できるものです。
いすゞとしての推奨スペックはCPUがDual core 2 2GHz以上、ワイヤレスラン機能、ハードディスクが60GB以上です。
また、サービスの現場での使用を考慮し、防塵、防水機能を持った堅牢タイプのPCをお勧めします。
例えば、Dell、Panasonic、NECのPCです。
License agreement screen

13. Destination location screen
Registration
You must register the program before you can use it. A registration key is assigned to each IDSS disc. This registration key can only be used once.
NOTE: You must be connected to the internet to complete
registration.
If you are connected to the internet, registration will take place and your IDSS program will be registered.
4. Once the registration is complete follow the on screen
installation instructions:
Installation startup screen
G-IDSSを使用するPCのスペックは市販のPCであれば、十分に使用できるものです。
いすゞとしての推奨スペックはCPUがDual core 2 2GHz以上、ワイヤレスラン機能、ハードディスクが60GB以上です。
また、サービスの現場での使用を考慮し、防塵、防水機能を持った堅牢タイプのPCをお勧めします。
例えば、Dell、Panasonic、NECのPCです。

14. Instillation status screen
Finish screen
5. Click the Finish button.
6. Make sure the interface device is not connected to the computer. Then, click the OK button. The device drivers will begin installation. The device drivers will automatically install.
Device drivers installation
G-IDSSを使用するPCのスペックは市販のPCであれば、十分に使用できるものです。
いすゞとしての推奨スペックはCPUがDual core 2 2GHz以上、ワイヤレスラン機能、ハードディスクが60GB以上です。
また、サービスの現場での使用を考慮し、防塵、防水機能を持った堅牢タイプのPCをお勧めします。
例えば、Dell、Panasonic、NECのPCです。

15. Update
7. Once the device drivers are installed, the web updater will display. Click the OK button to check for any updates.
The Web Updater configuration window will open and any updates will automatically be installed.
Once your system is up to date the window left will appear.
NOTE: If the PC is not connected to the internet you will receive an error message.
G-IDSSを使用するPCのスペックは市販のPCであれば、十分に使用できるものです。
いすゞとしての推奨スペックはCPUがDual core 2 2GHz以上、ワイヤレスラン機能、ハードディスクが60GB以上です。
また、サービスの現場での使用を考慮し、防塵、防水機能を持った堅牢タイプのPCをお勧めします。
例えば、Dell、Panasonic、NECのPCです。

16. Hardware Connections
Before IDSS can be used to diagnose a vehicle, the following system components must be connected together:
Laptop PC that has IDSS program installed
IDSS Interface Device
Smart cable
USB cable
Connect the USB Cable to the computer
Connect the USB Cable to the IDSS Interface Device
Connect the Smart Cable to the IDSS Interface Device
Connect the Smart Cable to the vehicle
When the USB is connected to the computer it will launch the Found New Hardware Install Wizard.  Follow the on screen installation instructions:
G-IDSSを使用するPCのスペックは市販のPCであれば、十分に使用できるものです。
いすゞとしての推奨スペックはCPUがDual core 2 2GHz以上、ワイヤレスラン機能、ハードディスクが60GB以上です。
また、サービスの現場での使用を考慮し、防塵、防水機能を持った堅牢タイプのPCをお勧めします。
例えば、Dell、Panasonic、NECのPCです。

17. Recent Service Bulletin
G-IDSS Main Screen
Vehicle Selection
1. Selecting vehicle from drop down menus.
2. Selecting vehicle from entered VIN. 1 2
3. Selecting vehicle from programmed VIN in ECM.
4. Selecting vehicle from recently used model. 3
Web Updater
Updating IDSS
Recent Service Bulletin
30 most recent service bulletins
G-IDSSを使用するPCのスペックは市販のPCであれば、十分に使用できるものです。
いすゞとしての推奨スペックはCPUがDual core 2 2GHz以上、ワイヤレスラン機能、ハードディスクが60GB以上です。
また、サービスの現場での使用を考慮し、防塵、防水機能を持った堅牢タイプのPCをお勧めします。
例えば、Dell、Panasonic、NECのPCです。 4

18. Help File & Version Information
Clicking the Help icon, then selecting “Help File” from the drop‐down menu will open a help file.
Help file is user’s guide for generally using the IDSS.
Clicking the Help icon, then selecting “About G-IDSS” from the drop‐down menu will open a window containing the current Scan Tool, Service Information and Firmware versions, Release Date, Dealer Code and Serial Number.
G-IDSSを使用するPCのスペックは市販のPCであれば、十分に使用できるものです。
いすゞとしての推奨スペックはCPUがDual core 2 2GHz以上、ワイヤレスラン機能、ハードディスクが60GB以上です。
また、サービスの現場での使用を考慮し、防塵、防水機能を持った堅牢タイプのPCをお勧めします。
例えば、Dell、Panasonic、NECのPCです。

19. G-IDSS Overview (TOC)
Once the Load Vehicle, Search for VIN or Request VIN button has been selected, a new window will open with the Table of Contents (TOC) on the left and an active toolbar on the top.
The following functions may be accessed, for the selected vehicle:
Service Information
Diagnostics
Controller Programming
Utility Functions
TOC provides a structured view of all IDSS options.
The TOC may be viewed or hidden by two selection methods:
Click the TOC icon on the toolbar.
Click the TOC arrows located between the two panes.
The icon on the toolbar and the arrows on the vertical split bar perform the same functions to minimize and restore the TOC.
G-IDSSを使用するPCのスペックは市販のPCであれば、十分に使用できるものです。
いすゞとしての推奨スペックはCPUがDual core 2 2GHz以上、ワイヤレスラン機能、ハードディスクが60GB以上です。
また、サービスの現場での使用を考慮し、防塵、防水機能を持った堅牢タイプのPCをお勧めします。
例えば、Dell、Panasonic、NECのPCです。

20. Toolbar
Status: Connection status with interface box and vehicle. Color will change from gray to yellow when connections are established.
Print: Prints the screen currently viewing
Table of contents: Minimize or restore the TOC view
DRM: Launches the DRM data download application
MIMAMORI: Launches the Mimamori data download application
Utility functions: View saved snapshot, freeze frame and other function
Controller programming: Performs calibration updates to ECU
Diagnostics: View scan tool data for the vehicle selected
Service information: View service information for the vehicle selected
Home: Return to the main screen

21. Service Information (Workshop Manual Mechanical Section)
IDSS contains service information for the vehicle selected. Navigate through the TOC by clicking on titles to find information you would like to view.
When a title in the TOC is selected, the associated information will display on the right side.
Scroll down to view all text and graphics for the title selected.
G-IDSSを使用するPCのスペックは市販のPCであれば、十分に使用できるものです。
いすゞとしての推奨スペックはCPUがDual core 2 2GHz以上、ワイヤレスラン機能、ハードディスクが60GB以上です。
また、サービスの現場での使用を考慮し、防塵、防水機能を持った堅牢タイプのPCをお勧めします。
例えば、Dell、Panasonic、NECのPCです。

22. Service Information (Workshop Manual Control Section)
G-IDSSを使用するPCのスペックは市販のPCであれば、十分に使用できるものです。
いすゞとしての推奨スペックはCPUがDual core 2 2GHz以上、ワイヤレスラン機能、ハードディスクが60GB以上です。
また、サービスの現場での使用を考慮し、防塵、防水機能を持った堅牢タイプのPCをお勧めします。
例えば、Dell、Panasonic、NECのPCです。

23. Service Information (Workshop Manual Control Section) Link to Scan Tool
When you click the "Enhanced Diagnostics" icon, a new window will open. This window will display "live" values from the vehicle for all parameters discussed in the diagnostic chart.
This window will also display DTC status for the vehicle module diagnosed by that chart.
G-IDSSを使用するPCのスペックは市販のPCであれば、十分に使用できるものです。
いすゞとしての推奨スペックはCPUがDual core 2 2GHz以上、ワイヤレスラン機能、ハードディスクが60GB以上です。
また、サービスの現場での使用を考慮し、防塵、防水機能を持った堅牢タイプのPCをお勧めします。
例えば、Dell、Panasonic、NECのPCです。

24. Electrical Schematics (1/3)
IDSS contains electrical schematics/ ETM for the vehicle selected. Navigate through the TOC by clicking on titles to find information you would like to view.
When a title in the TOC is selected, the associated information will display on the right side. Scroll down to view all text and graphics for the title selected.
The Schematics section lists all schematics for the vehicle.
G-IDSSを使用するPCのスペックは市販のPCであれば、十分に使用できるものです。
いすゞとしての推奨スペックはCPUがDual core 2 2GHz以上、ワイヤレスラン機能、ハードディスクが60GB以上です。
また、サービスの現場での使用を考慮し、防塵、防水機能を持った堅牢タイプのPCをお勧めします。
例えば、Dell、Panasonic、NECのPCです。

25. Electrical Schematics (2/3)
Click on the image displayed to open it in an image viewer.
When the image viewer opens it has a toolbar at the top.
The toolbar allows the user to select desired actions or functions from within the viewer.
Navigation: Directional navigation of the viewer
Zoom: Zoom in/ zoom out on the viewer
Magnifier/ Fit to page: Magnifier function and fit to page formats the image into a single page frame size
G-IDSSを使用するPCのスペックは市販のPCであれば、十分に使用できるものです。
いすゞとしての推奨スペックはCPUがDual core 2 2GHz以上、ワイヤレスラン機能、ハードディスクが60GB以上です。
また、サービスの現場での使用を考慮し、防塵、防水機能を持った堅牢タイプのPCをお勧めします。
例えば、Dell、Panasonic、NECのPCです。
Previous: Moves to the previous or next frame
Search: Searches for and highlights text within the image

26. Electrical Schematics (3/3)
There are linked areas within the ETM image viewer that when selected will open a window with information pertaining to that area of the ETM.
G-IDSSを使用するPCのスペックは市販のPCであれば、十分に使用できるものです。
いすゞとしての推奨スペックはCPUがDual core 2 2GHz以上、ワイヤレスラン機能、ハードディスクが60GB以上です。
また、サービスの現場での使用を考慮し、防塵、防水機能を持った堅牢タイプのPCをお勧めします。
例えば、Dell、Panasonic、NECのPCです。

27. Diagnostic Function (Scan Tool)
When you select the Diagnostics option from the TOC, IDSS will attempt to connect to the vehicle.
If all IDSS Interface Device and vehicle connections are ok, IDSS will connect to the vehicle and display current vehicle information.
Once a connection to the vehicle has been established, the following functionality is accessible:
DTC(s)
Data List
Actuator Test
Programming
Special Functions
Module Information
G-IDSSを使用するPCのスペックは市販のPCであれば、十分に使用できるものです。
いすゞとしての推奨スペックはCPUがDual core 2 2GHz以上、ワイヤレスラン機能、ハードディスクが60GB以上です。
また、サービスの現場での使用を考慮し、防塵、防水機能を持った堅牢タイプのPCをお勧めします。
例えば、Dell、Panasonic、NECのPCです。
If there is an update required for the IDSS Interface Device, IDSS will detect that an update is available and will perform the update the first time it is connected to a vehicle.
If an update is required, the screen left will appear and the update will begin:
Do not disconnect the interface device while it is being programmed.

28. Diagnostic Function (Scan Tool > DTC)
The DTC area in IDSS will provide the following information:
DTCs set for all communicating modules including:
Current and History.
DTC information for each communicating module.
Clear DTC functions for all modules and each specific module　Freeze Frame / Failure Record information for DTCs that are currently set.
The DTC Description screen will display DTC information for all DTCs set. When a new DTC is set, it will be added to the DTC Description table under the applicable module.
G-IDSSを使用するPCのスペックは市販のPCであれば、十分に使用できるものです。
いすゞとしての推奨スペックはCPUがDual core 2 2GHz以上、ワイヤレスラン機能、ハードディスクが60GB以上です。
また、サービスの現場での使用を考慮し、防塵、防水機能を持った堅牢タイプのPCをお勧めします。
例えば、Dell、Panasonic、NECのPCです。

29. Diagnostic Function (Scan Tool > DTC) Link to Workshop Manual
G-IDSSを使用するPCのスペックは市販のPCであれば、十分に使用できるものです。
いすゞとしての推奨スペックはCPUがDual core 2 2GHz以上、ワイヤレスラン機能、ハードディスクが60GB以上です。
また、サービスの現場での使用を考慮し、防塵、防水機能を持った堅牢タイプのPCをお勧めします。
例えば、Dell、Panasonic、NECのPCです。

30. Diagnostic Function (Scan Tool > Live Data)
IDSS Data List functionality includes the following:
Live Data
Requested DTCs
Zoom View
Graph
Quick Snap
Snapshot
You can view Live Data information for a module by selecting the Data List title in the TOC.
Information for each data list is displayed on a tab along with a Search tab. Click each tab to view the data list information.
G-IDSSを使用するPCのスペックは市販のPCであれば、十分に使用できるものです。
いすゞとしての推奨スペックはCPUがDual core 2 2GHz以上、ワイヤレスラン機能、ハードディスクが60GB以上です。
また、サービスの現場での使用を考慮し、防塵、防水機能を持った堅牢タイプのPCをお勧めします。
例えば、Dell、Panasonic、NECのPCです。

31. Diagnostic Function (Scan Tool > Live Data > Request DTC & Zoom Window)
Request DTCs
The requested DTCs information is displayed in the upper right corner of the data list page. DTCs set will display in the list.
Click on the DTC title to go to the DTC Info screen for the DTC selected.
Zoom Windows
When you click the Zoom Window within a parameter a new window will open. This window will display "live" values from the vehicle. Multiple parameters can be selected for viewing.
G-IDSSを使用するPCのスペックは市販のPCであれば、十分に使用できるものです。
いすゞとしての推奨スペックはCPUがDual core 2 2GHz以上、ワイヤレスラン機能、ハードディスクが60GB以上です。
また、サービスの現場での使用を考慮し、防塵、防水機能を持った堅牢タイプのPCをお勧めします。
例えば、Dell、Panasonic、NECのPCです。

32. Diagnostic Function (Scan Tool > Live Data > Graph)
G-IDSSを使用するPCのスペックは市販のPCであれば、十分に使用できるものです。
いすゞとしての推奨スペックはCPUがDual core 2 2GHz以上、ワイヤレスラン機能、ハードディスクが60GB以上です。
また、サービスの現場での使用を考慮し、防塵、防水機能を持った堅牢タイプのPCをお勧めします。
例えば、Dell、Panasonic、NECのPCです。
When you click the Graph icon within a parameter a new window will open. This window will display "live" values in graph form.
The IDSS graph function can be used as follows:
Data List information can be graphed "Live" when viewing a data list on vehicle.
Snapshot information can be graphed.
Each graph parameter will display in a different color.
The graph colors can be changed.

33. Diagnostic Function (Scan Tool > Live Data > Quick Snap)
The Quick Snap function allows the user to capture data and review it. The user starts and ends the data collection period by using the Quick Snap button.
Click the Quick Snap button to trigger and start recording frames.
Click the Stop Snapshot button to stop recording frames.
Upon completing of collecting the data, the Quick Snap view will appear.

34. Diagnostic Function (Scan Tool > Live Data > Snapshot)
The Snapshot function allows the user to capture data and review it. The user starts and ends the data collection period by using the Snapshot button.
Click the Snapshot button and a Snapshot Setup window will display.
Click the Continue button to open the Snapshot viewer or click the Return button to return to live data.
Click the Trigger button to start recording frames.
Click the Stop Snapshot button to stop recording frames.

35. Utility Function
Utility Functions allows you to access previously saved information. You can access the following types of files by selecting Utility Functions from the TOC:
Manage Saved Snapshot files
Manage Saved Freeze Frame Failure Record files
Scan Tool Preview
Graph Colors
Table of Contents Colors

36. Utility Function (Manage Saved Snapshot File)
The Manage Saved Snapshot Files screen will display all the Snapshot files currently saved for viewing. Select the file you want to "manage" by clicking in the box in the far left column. Then click on one of the manage options. To select all files, click the box in the title row.
Open
Select the Snapshot you would like to open by clicking
in the box in the row.
2. Click the Open button.
3. The saved Snapshot viewer will open.
Import
Click the Import button; this will open the “Select the
DAT file to import” window.
2. Select the file you want to import.
Export
Click the Export button; this will open the “Browse For
Folder” window.
2. Select the file you want to export.
Export to CSV
Click the Export to CSV (Comma Separated Variable)
button; this will open the “Browse For Folder” window.
Delete
1. Select the Snapshot you would like to delete by clicking
in the box in the far left column. You can select multiple
files to delete at once.
2. Click the Delete button.
3. You will be prompted to confirm the delete process.

37. Utility Function (Manage Saved Freeze Frame Failure Record)
The Manage Saved Freeze Frame Failure Record screen will display all the Freeze Frame Failure Record files currently saved for viewing. Select the file you want to "manage" by clicking in the box in the far left column. Then click on one of the manage options. To select all files, click the box in the title row.
Open
Select the Freeze Frame/Failure Record you would
like to open by clicking in the box in the row.
2. Click the Open button.
3. The saved Freeze Frame/Failure Record viewer will
open.
Import
Click the Import button, this will open the “Select the
FF2 file to import” window.
2. Select the file you want to import.
Export
Click the Export button; this will open the “Browse For
Folder” window.
2. Select the file you want to export.
Delete
Select the Manage Freeze Frame Failure Record
Files title you would like to delete by clicking in box in
the far left column. You can select multiple files to
delete at once.
2. Click the Delete button.
3. You will be prompted to confirm the delete process.

38. Utility Function (Scan Tool Preview)
The Scan Tool Preview function allows you to view Data Display and Output Control Test content, without vehicle data, for all vehicles supported by IDSS.
Click the Scan Tool Preview selection in the TOC and then use the drop‐down menus to select the vehicle you would like to view.
Once all vehicle information has been selected, choose to view the Data Display for that vehicle and click Continue. The data display or actuator tests for the vehicle you selected will display. You can select all data display and actuator test tabs and scroll to view all parameters included in each tab.

39. Controller Programming Function (1/4)
Controller Programming allows you to update and reprogram various vehicle controllers based on part numbers and/ or new available calibration files.
In order to access Controller Programming your dealership will need to have permission from Isuzu Motors. If you have not been granted permission, you may request it by selecting the “Request Programming Permission” button.

40. Controller Programming Function (2/4)
After selecting Controller Programming, choose the controller you wish to update. You will be asked to confirm the VIN.

41. Controller Programming Function (3/4)
This screen displays the current part number and update status. If an update is available, a new part number, “Calibration update found” and “Program” will be displayed.
If no updates are available, “No updates necessary” and “Overwrite” will be displayed.

42. Controller Programming Function (4/4)
During downloading, time in progress and estimated time remaining are displayed.
Once programming is completed, you will be taken to the following screen.

43. DRM Data Download (1/3)
As same manner with hardware connections, following components must be connected;
USB Cable to the computer
USB Cable to the IDSS Interface Device
Smart Cable to the IDSS Interface Device
Smart Cable to the DLC
Launch the DRM data download application on the toolbar icon, or from the shortcut
Select Download and applicable vehicle model.
Select your distributor code and country code.
Turn ON the ignition and press “Get Vehicle VIN” to retrieve the VIN from the ECM. If the IDSS application is opened, VIN cannot be retrieved. Close the application.
Input mileage from the odometer and the engine type.
Select the type of vehicle and type of freight.

44. DRM Data Download (2/3) Connect the DRM download cable
Turn OFF the ignition.
Disconnect the DRM harness connector, and connect the DRM download cable between the DRM and the disconnected DRM harness connector.
Unplug the smart cable from the DLC and connect to the DRM download cable.

45. DRM Data Download (3/3) Downloading
Leave the ignition switch OFF and press “Download DRM Data”. Once verify again the download cable connections.
Downloading starts after pressing “OK”, and progress bar appears. Until finish of complete download, it takes approximately 3 minutes.
Location of downloaded file
Press DAT. You will find the location of downloaded file. Location is G-IDSS folder in your computer hard drive > G-IDSS > DRM Download Data > Dated Folder.

46. Web Updater (1/2)
You will receive updates to IDSS through the internet.
The Web Updater is included in your PC’s startup processes.
If you leave your PC on and connected to the internet, the updater will run automatically at midnight.
If you want the updater to run automatically you must do the following:
You must be logged on to your PC
Your PC cannot be in standby mode
Manual Updating
At any time, You can open the Web Updater by clicking on the "Internet Updater" button in the IDSS Application. If you are connected to the internet, IDSS will check for updates and download them to your PC.
Connect to the internet.
Launch IDSS (double click on the IDSS icon).
Click on the Internet Updater icon from the IDSS Main Screen.
Close IDSS (click on the orange X in the upper right corner of IDSS) if opened.
Click on Check Updates Now in the Web Updater box.
If no updates are available, text will appear saying "Your system is up to date. No updates are available.”
If there are updates available, the updates will automatically be loaded to the PC after you click the Check Updates Now button.
After the updates have been downloaded to the PC, select "Install Updates". The updates will then be installed to the IDSS application.

47. Web Updater (2/2) Automatic Updating
Click the "Internet Updater" button. The Web Updater configuration window will open.
From the drop‐down menu select Daily, Weekly or Monthly. This selection is when you will receive updates to IDSS through the internet.
Make sure to follow these guidelines for the automatic updates to occur:
The PC must be turned ON.
IDSS should be CLOSED, but this does not matter as if you’re using the system as it will prompt you to install the updates by first closing IDSS. You can also install the updates at a later time (box will reappear each time you launch IDSS until the updates have been installed).
The PC CANNOT be in standby or hibernation mode.
You MUST be connected to the internet.

48. Intentionally blank