1. Element Fluxes and Cycling in Marine Particles During VERTIGO 2004: Preliminary Results near Station ALOHA Thanks to: Captain and crew of R/V Kilo Moana, Science Party of KM0414, Lary Ball, Suilou Huang, Mak Saito, Matt Charrette, Meagan Gonneea, Brian Guest, NSF-OCE, WHOI Post-doctoral Scholar Program (esp. John Farrington, Janet Fields and Christine Charrette), Penzance Endowed Discretionary Fund. Carl Lamborg, Ken Buesseler, Jim Valdes, Tom Trull, Jim Bishop, Karen Casciotti, Steve Pike, John Andrews, Steve Manganini, Chanda Bertrand and Dave Schneider WHOI ICPMS Facility

2. Introduction to VERTIGO Our Interests in Element Fluxes and Cycling VERTIGO 2004 (North Central Pacific Ocean) Methods Fluxes How Accurate? Solubilization of Poisoned Trap Materials Remineralization. Unpoisoned Incubations Remineralization Time and Space Length Scales…Factors Affecting Flux Attenuation Summary/Implications

3. At the heart of VERTIGO is the question: What controls the efficiency of particle transport between the surface and deep ocean? There is an obvious mismatch between spatial patterns in primary production and the export of carbon to the deep ocean that indicates a complex suite of transformations must occur in the “twilight zone”, the region below the surface euphotic zone and the deep ocean. C flux to seafloor -benthic O 2 demand. Jahnke, 1996 C uptake in surface ocean-SeaWiFS global primary production. Behrenfeld & Falkowski, 1997

4. Sinking Marine Particles – detritus from the euphotic zone and lithogenic material Swimmers Conventionally studied using shallow “sediment” traps, at the base of euphotic zone (100-150 m)

5. The VERTIGO P.I.’s have identified two general mechanistic possibilities: 1.particle source characteristics are the dominant control on the efficiency of particle transport. 2.mid-water processing, either by zooplankton or bacteria, controls transport efficiency. and/or

6. The Twilight Zone is Undersampled! A compilation of all particle flux vs. depth data available from the last decade of JGOFS studies (redrawn from Berelson, 2001; not all shallow data plotted). Solid line is Martin curve for POC with b=-0.858. This is likely to be where a lot of the action is…but few data.

7. Our Interests in Element Fluxes and Cycling Fluxes for many elements other than C, N and P are not well known…especially in the top 500m. e.g., Fe flux data lacking…fundamental information for understanding micronutrient cycling, and efficacy of Fe fertilization… Multi-element determinations may provide multiple tracers to constraining rates of particle remineralization, variable sinking rates (particle dispersion), and sources. biomineral and crustal elements in particular, in conjunction with other fluxes… Additional tests on Th-derived approach to calculating POC fluxes. e.g., will (Fe/ 234 Th) part when combined with 234 Th deficits match collections in sediment traps?

8. SiteLat/Lon Chl avg (mg m -3 ) Shallow POC Flux (g m -2 y -1 ) f-ratio Deep POC flux (g m -2 y -1 ) bSi/C inorg deep trap (mole) Dust Flux (g m -2 y -1 ) ALOHA 22.75º N 158º W 0.117-220.150.51<1 (est.)~0.5 K2 47º N 160º E 0.5860.420.824.2~10 Time Series sites provide context, data.

9. Gadgets! CLAP Trap- Buesseler CLAP Trap- Buesseler NBST-Valdes MULVFS- Bishop MULVFS- Bishop Splitter MOCNESS-UNOLS/Steinberg IRS Trap-Trull

10. 2 tubes poisoned w/ HgCl 2 2 tubes preserved w/formalin 1 tube covered blank 1 tube preserved w/formalin biological i.d. work “Clap” Traps surface tethered, drogued arrays screen, combine, split, filter filters dried, stored frozen 1 Ag (d#1) or 1 nucl. (d#2) filtrate Consists of 10 tubes on each drifting array. Deployed at 3 depths: 150, 300 and 500m 2 tube Trull’s Gels screen, combine, split, filter filters dried, stored frozen 1 Ag (d#1) or 1 nucl. (d#2) filtrate screen, combine, split, filter filters dried, stored frozen 1 Ag (d#1) or 1 nucl. (d#2) filtrate 2 tubes aging expts. 1 st HgCl 2 ; 2 nd formalin NBSTs 3 deployed @ 150 m, 2 @ 300 m and 2 @ 500m. Consists of 5 tubes on each array.

11. From incubation experiments, one acquires the value of k, the remineralization rate constant Accuracy Issue: Solubilization of material in the sediment traps lowers estimate of flux. some also believe “interstitial fluids” are an important component of flux…becoming enriched during sinking. squeezed out during processing (e.g., Avan Antia). slope=F slope=F’

12. VERTIGO Poisoned Particulate Solubilization Experiments 1. brine/particle mixture collected from 2 combined sediment tubes designated for incubation experiments. experiments conducted with samples from 150, 300 and 500m. poisons change with deployment. 2. mixture split 8 ways on splitter, into 500 mL bottles. 4. at pre-determined times, incubation bottle filtered on 0.2 µm PC, with liquid subsamples for ICPMS and DOC. half PC filter washed onto Ag filter for PC/PN/PP/bSi. filters dried and frozen. t = 3d5d30d1d 3. splits combined. samples incubated at in-situ temperature

13. Incubations of Poisoned Trap Material (and DOC from brine)

14. k = 0.1 d -1 suggests correction of 15-27%. In general, modest corrections needed from in-trap remineralization. Poisoned Solubilization Rates

15. HOTS Primary Production June ’04: 531 mg C m -2 d -1 August ’04: 539 mg C m -2 d -1 f-ratio: 0.04 Deep Trap Limit (Karl, unpublished)

16. Though there’s variability in the absolute magnitude in the traps…the particles do not appear to be sorting very much…they index pretty well. The organic matter is decaying as one would expect. Makes up about 60% of attenuating mass. The zero OM endmember is 4 g m -2 y -1 …average dust flux is 0.5 g m -2 y -1. red=150m green=300m blue=500m open=NBST closed=CLAP

17. average dust Al flux red=CLAP blue=NBST

18. red=150m green=300m blue=500m open=NBST closed=CLAP

19. Vertical Flux BehaviorElements Decreasing with Depth Sr, P, Ca, Mg, Total Mass, Ni, Th, PC, PN Constant with DepthAl, Sc, Fe, Cu Increasing with DepthBa, Mn Hard to TellTi, V, Co, Zn, Cd, Pb Summary of Flux Measurements No statistically significant difference between poisons. Little difference between CLAP and NBST for most elements...suggests little hydrodynamic particle sorting and/or systematic under/oversampling.

20. The Martin Curve Paraphrasing Tom Trull from the VERTIGO website…it’s the Law, but is it a good Idea? Does it fit the data any better than other functional forms, for instance that proposed by Lutz et al. (2002) : If flux attenuation is completely due to in-situ remineralization, then degradation rates of unpoisoned material can be used to estimate sinking rates through comparison of remineralization length (time/space) scales… define remineralization length scale as e-folding scale (time or depth over which flux changes by 1/e):

21. The Martin Attenuation Curve is matched with exponential decay to zero, while Lutz Attenuation Curve is matched with exponential decay to a constant. Lutz Curve matches the data better (esp. if you include deep trap data)…but Martin Curve appears to require increasing bulk sinking rates, which is consistent with increasing importance of ballasting biomineral phases. Is Reality somewhere in between? sinking rate accelerates with depth! sinking rate is constant in relation to remineralization

22. t =0 1d2d VERTIGO Unpoisoned Particulate Degradation Experiments 1. quarter filter washed into incubation bottle using 0.2 µm filtered 500m water 2. water/particle mixture occasionally agitated, incubated at depth appropriate temperature in dark. 150m: 25 ºC; 300m: 15 ºC; 500m: 4 ºC 3. at particular times, incubation bottle agitated and aliquot removed by clean syringe. mixture is filtered on 0.2 µm PC, with liquid subsamples going for nitrification experiments ( 15 NH 4 + ), ICPMS and DOC. filters rinsed and dried for ICPMS. half PC filter washed onto Ag filter for POC. 3d5d

23. Unpoisoned Remineralization Rates More elements showed remineralization in these experiments than in the poisoned experiment, but not all…

25. Element Apparent sinking Rate (m d -1 ) Ba114 - 233 Mgslow - 294 Alundefined P14 - 43 Ca51- fast Scfast Mnslow Fefast CoSlow - 107 Niundefined - slow Sr77 - 219 Sinking Rates for Comparison of Remineralization Rates and Attenuation Lengths (deployment 1) For elements where attenuation and remineralization both seen, the analysis suggests sinking rates comparable to those observed directly…remineralization can explain the vertical profiles! For the others, analysis suggests constrained fast or slow rates…either approach is breaking down or perhaps other factor important (particle type, grazing) slow=attenuation in flux profile seen, but little remineralization on 5 day timescale. fast=vertical profile doesn’t show much attenuation, but some remineralization seen. Martin, Lutz give comparable results.

26. Summary/Implications Sediment traps were successfully used for trace level work for many elements. In the quiet conditions of the N. Pacific Gyre, NBSTs and tethered traps mostly compared well. Some differences, with tethered often higher. In-trap solubilization of most elements, as indicated by poisoned incubations, did not significantly alter flux estimates. shallow traps, deployed for short times, generally not as affected as deep traps as suggested by Antia and others. Though there appears to be something of a biological imprint on Fe cycling, Fe “remineralization length scales” are longer for Fe than C. no catalytic effect can be expected for Fe additions in removing CO 2. Sinking rates suggested by matching unpoisoned remineralization rates and vertical flux attenuation are, for many particle constituents, consistent with direct sinking rate measurements. this suggests that much of the control on the flux of this material was through mid-water remineralization processes. microbial and physical/chemical processes likely dominant. particle source/type and grazing less important.