Download presentation
Presentation is loading. Please wait.
Published byShauna McGee Modified over 9 years ago
1
Select Organization Name Suggested Names –Council 331 an assembly of persons summoned or convened for consultation, deliberation, or advice. a body of persons specially designated or selected to act in an advisory, administrative, or legislative capacity: the governor's council on housing. –TPE331 Watchdog a watchful guardian: a self-appointed watchdog of the public morals. organized or functioning as a watchful guardian, esp. against illegal or unethical conduct –Others Suggestions
2
Select Mission Statement Suggested Statement –Provide an independent technical and operational maintenance forum to ensure the continuing quality and safety of the Honeywell/Garrett TPE 331 series turboprop engines. Other Suggestions
3
Election of Board Members Members Titles Annual Meetings Due’s $$?
4
Special Action Committees Appoint “Volunteers” –Function: Follow through on specific topics and report to membership. Action Items –Website setup and maintenance –Technical issues –Logistical problems (ie. part shortages) –FAA interaction (ie. SAIB’s, NPRM’s) –Others?
6
Typical 2 nd Stage Rotor Burst PN 868272-1
13
AD 2006-15-08 Woodward Fuel Control modification and Spline Inspection Committee follow up with FAA on AD re-write or SAIB Topics for Discussion
14
Continuing Failure of Idler Bearings PN 3103035-1, 3103585-1 Topics for Discussion
16
S.O.A.P. Sample Report Times On August 28th an oil sample was taken during routine maintenance and expedited to a Honeywell authorized independent laboratory in Mississauga, Ontario. Wearcheck Canada carried out the analysis on August 30th. I was notified by fax on September 6th at 10:12 that engine S/N: P-38328 had been flagged to “INSPECT THIS ENGINE IMMEDIATELY” due to a filter weight of 101.0 and major copper. Topics for Discussion
17
Clarification and discussion of 7000 hour maintenance program 9 year Service Bulletin requirements 72-0180, 72-0476 Topics for Discussion
18
7,000 hour service bulletin requirements SB 72-0180, R31
19
7,000 hour service bulletin requirements SB 72-0476, R27
20
Standardization of Traceability Sheet at H.S.I., OH or CAM from maintenance facilities Topics for Discussion
21
IRM Temporary Revisions 72-IR-10, 72-IR-15 Removal of Turbine Wheel Rivet Hole Repairs Topics for Discussion
22
Service Bulletins 72-0619 Maintenance Tips 1.To provide an engine with improved Negative Torque Sensing (NTS) operation by changing to a feathering valve that has a lower operating pressure. 2. To insure NTS lockout during reverse operation by changing the NTS orifice assembly dump rate to interface with feathering valve with lower operating pressure.
23
Service Bulletins 72-0619 Maintenance Tips PROBLEM! Interchanging of matched feather valve and NTS orifice with other engines for troubleshooting purposes
24
Service Bulletins 72-0957 Maintenance Tips Reason The engine manufacturer has determined that washers under bolt heads securing propeller shaft bearing outer race to gearbox housing are not required.
25
Service Bulletins 72-0957 Maintenance Tips PROBLEM! Aft propshaft bearing retaining bolts loosening Recommend reinstallation of locktab, PN MS9581-09
26
Other suggestions? Maintenance Tips
Similar presentations
© 2025 SlidePlayer.com Inc.
All rights reserved.