Presentation is loading. Please wait.

Presentation is loading. Please wait.

Combining Light & Sound Can ultrasound become the preferred modality for functional and molecular imaging? Shai Ashkenazi Biomedical Ultrasound Lab Dept.

Similar presentations


Presentation on theme: "Combining Light & Sound Can ultrasound become the preferred modality for functional and molecular imaging? Shai Ashkenazi Biomedical Ultrasound Lab Dept."— Presentation transcript:

1 Combining Light & Sound Can ultrasound become the preferred modality for functional and molecular imaging? Shai Ashkenazi Biomedical Ultrasound Lab Dept. Biomedical Engineering University of Michigan

2 Outline Imaging devices Imaging methods Imaging agents Photoacoustic
Ultrasound Photoacoustic Imaging agents

3 Ultrasound Imaging Array of Tx/Rx elements
Beam steering and focusing – time delayed channel excitation Receive – delay & sum Reflections – different density, speed of sound

4 Ultrasound Imaging Penetration depth (mm) Low MHz 10 – 20 MHz
100 Penetration depth (mm) Low MHz 10 – 20 MHz 10 > 20 MHz (UBM) Abnormal Thyroid Gland 1 0.01 0.1 1 Resolution (mm)

5 Opto-Acoustic Ultrasound Transducers

6 Optoacoustic US Transducers
Receive / Transmit Hi Q

7 Bell’s Photophone February 1880

8 Etalon detector – principle of operation
PD Array (camera) CW laser

9 Etalon detector – principle of operation
Ultrasound – Space/time load 2Kg Etalon PD Array (camera) CW laser

10 Piezo vs. Etalon Comparison of sensitivity
TRANS 2.7 2.9 Time (s) Amplitude Etalon 5.3 5.5 5.7 Time (s) Pulse-Echo ETALON

11 Optical Generation of Ultrasound
Water Black PDMS Clear PDMS Laser pulse High thermal expansion Optically absorbing

12 2D Gold Nanostructure 4.5 um PDMS layer 220 nm Glass Substrate 128 nm

13 Acoustic Signal

14 Spectrum

15 Acoustic Pressure Acoustic pressure increases linearly with optical input energy Thermal damage threshold: 25 uJ delivered to a spot size of 25 um Acoustic pressure at thermal damage threshold: 500 kPa at 10 mm

16 Integrated Device SU-8 protection layer PDMS layer Etalon 6 um 200 nm
Ultrasound Generation Beam Ultrasound Detection Beam

17 Pulse-echo Results

18 Optical Microring detectors

19 Resonance optics l Output = T + S T = - S (critical coupling)
S = 0 (off-resonance phase cancelation)

20 Experimental verification
16.5 18 Time (s) Ultrasound Transducer US Pulser a b c 1558 1563  (nm) Transmission Tunable Laser Photodetector

21 Wavelength dependence
Trans. Modulation a b c 1558 1563  (nm) Transmission 16.5 18 Time (s) 10 MHz Transducer

22 Array configurations 80 elements sharing 1 waveguide 2D Arrays
Demultiplexer and Photodetector array In Out λ1 λm λm+1 … λ2m λ3 … λ2 Fiber coupled optical circulator Demux and Photodetector array Tunable laser Miniaturization of high-Freq arrays for intravascular and “in-vivo” microscope application

23 Why Micro-Optics for Ultrasound Devices?
Micron size elements High frequency arrays > 30 MHz High SNR (size independent noise) Wide Bandwidth > 50 MHz Selectable sensitivity “Shiftable” dynamic range High BW signal comm. (80 Ch. on SMF using 100 GHz standard grid)

24 Applications – Smart Needle
High resolution ultrasound microscopy at the tip of a needle Guiding biopsy Reducing bleeding complications (e.g. in kidney biopsy) 200 µm Receive r array Transmitter 2 mm Side viewing G23 0.64 mm

25 Photoacoustic Imaging
500 mm

26 PA imaging Receiver Laser pulse (~5 ns) Heat absorption
Temp. rise (~ 0.01 °C) Thermal expansion (strain ~ 10-5) Acoustic propogation Detection and Source reconstruction Receiver

27 Etalon for Photoacoustic imaging
PD Array (camera) CW laser Etalon

28 2D phantom imaging Photoacoustic image 100 mm 0.11mm Optical image

29 532 nm pulsed illumination
Nerve cord imaging 500 mm Nerve Cord In Lobster Tail 532 nm pulsed illumination Probe laser scan lines (4mm x 0.36mm aperture)

30 3D phantom imaging 50 µm Array size: 128x Element spacing: 30 um

31 Pig Coronary Artery 700 nm Axial Position (mm) Lateral Position (mm)

32 Photoacoustics agents for functional and molecular imaging

33 Gold Nanorods – Molecular probe for PAI

34 Au Nanorod – Spectrum

35 Bioconjugation Gold Nanorod Surfactant (CTAB) Antibody PAA

36 Cell Culture Setup AM OS UT SC CC BX Laser OPO

37 Photoacoustic Image – LNCaP Cells
-10 Conjugated Nanorods -20 -30 1 mm -40 -10 Unconjugated Nanorods -20 -30 -40

38 UltraSound-PhotoAcoustic (USPA) Imaging Combined Modality
Laser OPO US UA PH SYNC BX

39 Animal Imaging

40 Prostate Imaging

41 PEBBLES – Molecular Contrast

42 Conclusions Photoacoustics provides an exciting vehicle for molecular imaging PEBBLES can be detected at only 10 particles per cell with 100 nm particle diameter Nanorods can be detected at only 50 particles per cell with volume 50 times less than PEBBLE Both agents can be made much more efficient

43 Future research projects
Optical resonators for ultrasound sensing PA contrast for cancer detection Sensor dyes for functional PAI PA sensor for protease activity

44 Optical resonators for ultrasound sensing
Waveguide Bragg Grating Ultimate sensitivity for PAI applications – Acoustic noise limited Explore structures for optimal acousto-optic interaction Membrane interface Air-water interface

45 PA contrast for cancer detection
Real-time PA imager Small animals Clinical trials Stability-dynamics of nanoparticles in-vivo Cell targeting - Prostate Cancer - Thyroid cancer

46 Sensor dyes for functional PAI
Combine versatility of molecular probes with PAI Develop PA imaging of pH, Ca, O2, and other Study PA sensing mechanisms Absorption (change, spectral shift) Fluorescence quenching  PA increase Life time of non-radiative decay  change in PA shape Delivery agents - Dye embedded nanoparticles

47 Example - pH dye SNAFR-5F

48 PA sensor for protease activity
Abs

49 T H AN K S EECS Jay Guo ChungYen Chao Tao ling JingSung Chemistry
Raoul Kopelman Gwangseong Kim Tom Horvath Rodney Agayan Chemical Eng. Nick Kotov Ashish Agarwal Cancer Center Mark Day Kathleen Day

50 More slides

51 Fabrication Process I SiO2 polymer Si Laser Interference Lithography
glass Nanoimprint Lithography

52 Fabrication Process II

53 Experimental Setup Pulsed Laser Input Collimator ND filters Lens
Transducer Data Collection Amplifier

54 Pulse-echo Experiment
Reflector Ultrasound Generation Beam Data Capture Integrated Device Ultrasound Detection Beam Photodiode Amplifier PBS

55 Optical Absorption

56 50 MHz Test Signals Pulse-echo Optic modulation Spectra

57 Acoustic modulation Reflection x Wavelength y z

58 Stained live lobster nerve cord
PE Depth PA 2 mm Lateral DR = 32 dB

59 Phantom Image dB Detection sensitivity = 5 x 1010 particles/cc
-35 -25 -15 -5 5 mm dB Detection sensitivity = 5 x 1010 particles/cc = 50 particles/cell

60 PEBBLE with ICG

61 PEBBLE with ICG - Stability

62 PEBBLE with ICG - Spectrum

63 Photoacoustic Image – PEBBLES
Position (mm) 10 20 30 15 25 1010 1012 1011 Detection sensitivity = 1010 particles/cc = 10 particles/cell

64 Photoacoustic Image – LNCaP Cells
Position (mm) 1 -40 -30 -20 -10 Conjugated PEBBLES Unconjugated PEBBLES


Download ppt "Combining Light & Sound Can ultrasound become the preferred modality for functional and molecular imaging? Shai Ashkenazi Biomedical Ultrasound Lab Dept."

Similar presentations


Ads by Google