1. Common Net-Spinning Caddisflies Vs. Regular Caddisflies
Trichoptera
Common Net-Spinning Caddisflies Vs Regular Caddisflies

2. Trichoptera
North of the Rio Grande there are ~1350 species represented in 147 genera, 22 families.
Habitat can range from slow moving lake waters to very fast rivers and streams with almost all habitats in those environments being populated.
Four main feeding types:
Shredders – Feed on living and/or decomposing plant matter.
Collectors – Filter debris or gather nearby fine organic particulates.
Scrapers – Feed on periphyton and/or fine organic particles.
Predators – Feed on whole animals or large parts.

3. Trichoptera
Basic morphology – Head, Thorax (3 segments), Abdomen (9 segments, the anal prolegs are interpreted as derivatives of the tenth segment).
Tolerance – (0-10) Ranges from
Tolerant ≥ 7.
Not very many tolerant genera.

4. Trichoptera 3 different types (based on case types).
Case maker - makes a case from organic debris or sediment. Can be fixed or portable (Most families).
Fixed retreat-makes cases or nets that are attached to a substrate of some type.
Free roaming – have no fixed retreat or portable case.

5. Trichoptera
Case makers – Make portable cases for protection and refuge. Cases can be made from sediment(sand, pebbles), organic matter(twigs, leaves) or shells.

6. Trichoptera Net Spinners – Three main families:
Polycentropodidae – 76 species in 7 genera, usually found on the bottom and prefer slower waters.
Philopotamidae – 42 species in 3 genera, attach nets to underside of rocks in areas with good flow.
Hydropsychidae – 144 species in 12 genera, found in fast flowing areas on top of rocks.

7. Trichoptera Common net spinners – Hydropsychidae
Dorsal plates (sclerites) on all three thoracic segments.
Branched gills on the ventral surface of the last two thoracic segments and most of the abdominal segments.
Usual have a setal tuft at the end of each anal proleg.

8. Trichoptera Common net spinners – Hydropsychidae (cont.)
One other family might be confused with these: Hydroptilidae – also known as micro-caddisflies.
2-6mm in length.
Three dorsal thoracic plates.
No gills on adbomen or thorax.
Case maker.

9. Trichoptera Common net spinners – Hydropsychidae Recap:
Have three dorsal plates (sclerites)on the thorax.
Have gills on the ventral side of the second and third thoracic segments and most of the abdominal segments.
(first instars may not have gills)
Usually have a tuft of setae on each anal proleg.
Might be confused with Hydroptilidae

10. Trichoptera
Comparison of images from the key
Case maker

11. Trichoptera
Comparison of images from the key
Free living

12. Trichoptera
Comparison of images from the key
Common net spinner