Presentation is loading. Please wait.

Presentation is loading. Please wait.

CLIC alignment studies OUTLINE CLEX Alignment of the components Impact of beam on sensors readings Long term stability of the supports (girders, DB quad)

Similar presentations


Presentation on theme: "CLIC alignment studies OUTLINE CLEX Alignment of the components Impact of beam on sensors readings Long term stability of the supports (girders, DB quad)"— Presentation transcript:

1 CLIC alignment studies OUTLINE CLEX Alignment of the components Impact of beam on sensors readings Long term stability of the supports (girders, DB quad) LAB: New sensors support Universal fiducial support New configuration of sensors CLIC Project Meeting 09/06/2015 Hélène Mainaud Durand on behalf of the CLIC pre-alignment team

2 2

3 3 CLEX  Configuration of sensors & components

4 4 CLEX  Alignment of the DB side components

5 CLEX  Alignment of the MB side components 5 Linear-regression (AS1 and AS2) Z (vertical) X (longitudinal) Z (vertical) AS1 AS2 3865-C2 3865-C1

6 Beam OFF Beam ON (DB and MB) 6 CLEX  Impact of beam

7 7 CLEX  Long term stability (DB)

8 8 CLEX  Long term stability (MB)

9 9 CLEX  Long term stability (DB quad support) Radial (µm) Vertical (µm) DBQ1 C1-9-4 C2-319 DBQ2 C1811 C2-3-14 Offsets measured after 3 months

10 10 LAB  Configuration of sensors & components -Alignment sensors are installed on the cradle -Misalignment between the cradle & the girder  Fiducialisation lost In situ fiducialisation: Sensors support on the girder

11 11 LAB  New sensors support

12 12 LAB  New sensors support Best-fit In µmRMS Max Girder Max Support Max Cradle Stability measurements 01/06/20153498 Measurements after warm up 02/06/20152486 Measurements after warm up 04/06/20153612 Measurements after 1 displacement of 800 microns 04/06/2015 48811 Measurements after several displacements 04/06/2015 351123 Measurements after loading 04/06/2014461119 Measurements after warm up + loads 08/06/2015 461312

13 13 LAB  Universal fiducial 1 unique support of fiducials for different means of measurements  Identification of potential companies  Patenting study by a patent attorney

14 14 LAB  New configuration of sensors RasDif RasNik

15 15 Perspectives  CLEX Implementation & validation of the active pre-alignment algorithm Various studies with beam: WPS sensors readings w.r.t WFM, optimization of the position with beam  LAB: End of the study: cradle w.r.t. girder Re-installation of oWPS (replacing NIKHEF sensors) Validation & test of motorized DBQ supports Fiducialisation, alignment of the components of type 0 -2  TT1: Relative comparison between NIKHEF laser based alignment systems and WPS systems

16 Thank you very much for your attention Special thanks to: Mateusz Sosin Vivien Rude Mathieu Duquenne Marek Gutt Mostowy Juha Kemppinen Guillaume Stern Nikkie Deelen 16


Download ppt "CLIC alignment studies OUTLINE CLEX Alignment of the components Impact of beam on sensors readings Long term stability of the supports (girders, DB quad)"

Similar presentations


Ads by Google