1. Energy
Kinetics
Reaction Kinetics
CA State Standard 8
Chapter 17

2. Isaacs TEACH 
collision theory 5:12
potential energy diagrams 6:54
rate of reaction and rate laws 11:14 (continue watching through the accelerated class section!)
factors that affect reaction rate 10:38 (continue watching through the accelerated class section!)
reaction mechanisms (and rate limiting step) 4:31
Crash Course Chemistry:  Chemistry's Demolition Derby - 9:57 This also introduces/reviews some equilibrium concepts!

3. Bozeman Science
Rate Law 8:43 (Don’t worry about finding slope of curves – beyond what you need to know) – watch this one before the one on the Rate Constant
rate of Reactions 6:24 (you do NOT need to know anything about Beers Law!)
of Reaction 8:02 Review of Chapter 16 material (calorimetry, Hess’s law)
Rate Constant 6:52 (a bit more in depth starting about halfway through the video) If you’re going to skip a video, this one would be it!

4. Average reaction rate = -∆ quantity ∆t
Reaction Rates
change in concentration of reactants per unit time as a reaction proceeds.
Average reaction rate = -∆ quantity ∆t
Chemical kinetics is the area of chemistry that deals with reaction rates and reaction mechanisms.

5. Collision theory states that in order for reactions to occur between substances their particles must collide with sufficient energy and with a favorable orientation.

7. Exothermic Reaction pathway

8. Endothermic reaction pathway

9. Activation energy :
minimum energy required to transform the reactants into an activated complex.

10. Activated complex
transitional structure that results from an effective collision and that persists while old bonds are breaking and new bonds are forming.

11. Factors affecting reaction rate:
For homogeneous reactions Nature of reactants: the types of reactants involved (i.e. ions vs. molecular substances; gases vs. liquids or solids)

12. Concentration: the higher the concentration of one or more of the reactants results the faster the reaction rate.

13. Temperature
An increase in temperature increases the number of particles that have enough energy to form the activated complex. In general, for every 10 K (10˚C) rise in temperature, there is a doubling of the rate.

14. Catalysts
substances that change the rate of the reaction without being consumed. Homogeneous catalysts are of the same phase as the reactants while heterogeneous catalysts are of a different phase as the reactants.

16. Enzyme animation:

17. For heterogeneous reactions:
surface area is also important. (i.e. wood chips vs. a log)

18. Reaction Mechanisms
step-by-step sequence of reactions by which the overall chemical change occurs

19. Rate-determining step.
The slowest step in multiple step chemical reaction. This can be determined experimentally or you would be given this information.

20. Intermediates
Species that appear in some steps but not in the net ionic equation.

21. Two possible mechanisms
I2  2I-
2I- + H2  2HI
I2 + H2  2HI
I2  2I- I- + H2  H2I H2I + I-  2HI I2 + H2  2HI
I- and H2I are both intermediates

22. Reaction Rate Laws
A rate law is an equation that relates reaction rate and concentrations of reactants. It is specific for reactions at specific temperatures.

23. Example: R = k[A][B] Single step reaction.
Suppose A + B  2C. One particle of A and B is involved in each collision. So, doubling the concentration of either A or B will double the collision frequency, thus doubling the reaction rate. Therefore the rate law is
R = k[A][B]

24. Example continued R = k[C] 2
If the reaction is reversible, 2C A + B, then two molecules of C must decompose to form one each of A and B. Thus the rate law is
R = k[C] 2

25. Reaction order
The exponents to which the concentration terms are raised (define how the rate is affected by the concentration of that reactant), and their sum is the overall reaction order. The value of these exponents is always determined experimentally.

26. zero-order
changing the concentration of one reactant has no effect on the rate, then it is zero-order for that reactant

27. 1st order
rate depends on the concentration of a single reactant raised to the first power
A products
Rate = k[A]

28. 2nd order
rate depends on the reactant concentration raised to the second power or on the concentrations of two different reactants, each raised to the first power
Rate = k[A]2

29. Determine values for m and n
General form for a rate law expression
Rate = k [A]m[B]n
Determine values for m and n

30. Example problem
The initial rate of a reaction A + B  C was measured for several different starting concentrations of A and B, with the results given here:

31. Experiment number
[A] (M)
[B] (M)
Initial rate
(M/s) 1
0.100
4.0 x 10-5 2
0.200 3
16.0 x 10-5
Using these data, determine (a) the rate law for the reaction; (b) the magnitude of the rate constant; (c) the rate of the reaction when
[A] = M and [B]= M.

32. Solution part A
Looking at experiment 1 and 2 keeping [A] constant, doubling [B]; no effect on rate. Order of B is 0 (n=0). Looking at experiments 1 and 3 keeping [B] constant, doubling [A]; rate increased by a factor of 4, i.e. [A]2 (m=2).
rate = k[A]2

33. Solution part B [A]2 = 4.0 x 10-5 M/s (0.100 M)2 = 4.0 x 10-3 M-1s-1
k = rate
[A]2
= 4.0 x 10-5 M/s
(0.100 M)2
= 4.0 x 10-3 M-1s-1

34. Solution part C
Rate = k[A]2
(4.0 x 10-3 M-1s-1)(0.050 M)2
= 1.0 x 10-5 M/s

35. Isaacs TEACH 
collision theory 5:12
potential energy diagrams 6:54
rate of reaction and rate laws 11:14 (continue watching through the accelerated class section!)
factors that affect reaction rate 10:38 (continue watching through the accelerated class section!)
reaction mechanisms (and rate limiting step) 4:31

36. Bozeman Science
Rate Law 8:43 (Don’t worry about finding slope of curves – beyond what you need to know) – watch this one before the one on the Rate Constant
rate of Reactions 6:24 (you do NOT need to know anything about Beers Law!)
of Reaction 8:02 Review of Chapter 16 material (calorimetry, Hess’s law)
Rate Constant 6:52 (a bit more in depth starting about halfway through the video) If you’re going to skip a video, this one would be it!

37. Brightstorm videos:
3:04
Reaction rates factors  
9:38
Reaction rate problems. Excellent! Look at primarily the second problem (which is quite involved)