1. Chapter 1 1.1 Relations & Functions 1.2 Composition of Functions
1.3 Graphing Linear Equations
1.4 Writing Linear Equations
1.5 Equations of Parallel & Perpendicular Lines
1.7 Piecewise Functions
1.8 Graphing Linear Inequalities

2. 1.1 Relations & Functions
A relation is a set of ordered pairs. The domain is the set of abscissas ( x – values) of the ordered pair and the range is the set of ordinates (y – values) of the ordered pair.
Example: (2,4) (3,5) (4,6) (-1,1) (0, 2)
These ordered pairs represent the relation {y = x + 2}.
The domain values are: {x: -1, 0, 2, 3, 4}
The range values are: {y: 1, 2, 3, 4, 5, 6}

3. 1.1 Relations & Functions
Example: (2,4) (3,5) (4,6) (-1,1) (0, 2)
These ordered pairs represent the relation {y = x + 2}.
The domain values are: {x: -1, 0, 2, 3, 4}
The range values are: {y: 1, 2, 3, 4, 5, 6}
___x_____y___
0 2
2 4
3 5
4 6
The relation can also be expressed as a x-y table of ordered pair coordinates.

4. 1.1 Relations & Functions
Example: (2,4) (3,5) (4,6) (-1,1) (0, 2)
These ordered pairs represent the relation {y = x + 2}.
The domain values are: {x: -1, 0, 2, 3, 4}
The range values are: {y: 1, 2, 3, 4, 5, 6}
When graphing a relation, the graph may be a line, a conic section, a curve or series of curves, continuous or non-continuous. It only represents the ordered pairs that make the relation true.

5. 1.1 Relations & Functions
Function – A relation in which each element of the domain is paired with exactly one element in the range.
Is not a function
Is a function
Is a function

6. 1.1 Relations & Functions
Function – A relation in which each element of the domain is paired with exactly one element in the range.
Vertical Line Test – If every vertical line drawn on the graph of a relation passes through no more than one point of the graph then relation is a function.
Is a function
Is not a function

7. 1.1 Relations and Functions
Function Notation – A symbol is used to designate a relation as a function and to determine the range value from a specific domain value. f(x) , read f of x, or the function f evaluated at x. With each applied value of x inserted into the equation, a range value, f(x), results. This creates a collection of ordered pairs. x
f(x) x1
f(x)1 x2
f(x)2 x3
f(x)3 x4
f(x)4
(x1, f(x)1 ), (x2, f(x)2 ),
(x3, f(x)3 ), (x4, f(x)4 )

8. 1.1 Relations and Functions
Example:
f(x) = x 3 + 2x - 4 x
f(x) -1
- 7
- 4 1 2 8
(2,8)
(1,-1)
(-1, -7), (0, -4 ),
(1, -1 ), (2, 8 )
(0,-4)
(-1,-7)

9. 1.1 Relations and Functions
Special function concerns – If a function includes variables in a denominator, then values of the variable that create a 0 in the denominator must be excluded from the domain, as division by zero is undefined. Also, if a function has even root equation in the numerator or denominator, values that create a negative value are not included in the domain, as they create imaginary numbers.
f(x) = x x – 4 (x  4)
F(x) = √ x – x  3
Domain: {x: , x  3}
Domain: {x: , x  4}

10. 1.1 Relations and Functions
Homework from Textbook
Pages 10 – 11
Problems 17 – 51 odd problems

11. 1.2 Composition of Functions
Composition of Functions – When two unique functions are merged together with any algorithmic process or by evaluating a function by using the results of a second function as its domain.
Examples: (f + g)(x) = f(x) + g(x) sum
(f – g)(x) = f(x) – g(x) difference
(f · g)(x) = f(x) · g(x) product
( f/g)(x) = f(x) ÷ g(x) , g(x)  0 quotient
(f  g)(X) = f(g(x)) composite
The domain of f  g includes all of the elements x in the domain of g for which g(x) is the domain of f.

12. 1.2 Composition of Functions
The domain of a composite function is determined by the domains of f(x) and g(x).
To determine the domain of a composite function, begin by determining the domain of each function separately.
Any values for the inside function; g(x) in the relation f(g(x)) that are not defined will also be not defined in the composite.
Match the domain limitations of f(x) to the function g(x) to determine any other limitations.

13. 1.2 Composition of Functions
Example: f(x) = x2 – x + 3
g(x) = √ x – 1
Domain for f(x) (x  3)
Domain for g(x) (x  1)
Domain for f(g(x)) will include x  1 and the outcome of the relation
that merges √ x – 1  3.
Simplifying this equation we get that x – 1  9, and this lets us conclude that x 10. Therefore, the domain for the composite function f(g(x)) is {x: x  1 and x 10}.
Proof: (√ x – 1 – 3  0)  (√ x – 1 – 3)2  02 
x – √ x –  0; inserting 10 for x causes 0  0.

14. 1.2 Composition of Functions
Example: f(x) = x2 – x - 4
g(x) = √ x + 1
Domain for f(x) (x  4)
Domain for g(x) (x  -1)
Domain for f(g(x)) will include x  -1 and the outcome of the relation that merges √ x + 1  4.
Simplifying this equation we get that x + 1  16, and this lets us conclude that x 15. Therefore, the domain for the composite function f(g(x)) is {x: x  -1 and x 15}.
Proof: (√ x + 1 – 4  0)  (√ x + 1 – 4)2  02 
x √ x  0; inserting 15 for x causes 0  0.

15. 1.2 Composition of Functions
Example: f(x) = x2 – x - 4
g(x) = √ x + 1
Domain for f(x) (x  4)
Domain for g(x) (x  -1)
Domain for f(g(x)) will include x  -1 and the outcome of the relation that merges √ x + 1  4.
Simplfying this equation we get that x + 1  16, and this lets us conclude that x 15. Therefore, the domain for the composite function f(g(x)) is {x: x  -1 and x 15}.
Proof: (√ x + 1 – 4  0)  (√ x + 1 – 4)2  02 
x √ x  0; inserting 15 for x causes 0  0.

16. 1.2 Composition of Functions
The composite of a function with itself is called an iteration. It is the expression (f f)(x) or otherwise stated as f(f(x)). When xo is inserted into the function f(x), the answer is the first iterate; i.e., f(xo) = x1, the first iterate. If we evaluate f(x1), we get the second iterate, x2. This process can continue to the specified iterate needed for the problem.

17. 1.2 Composition of Functions
Example of an iteration.
Let f(x) = 2x -5 and xo = 4. Determine the 4th iterate of this function.
f(4) = 2(4) – 5 = first iterate 3
f(3) = 2(3) -5 = second iterate 1
f(1) = 2(1) – 5 = -3 third iterate -3
f(-3) = 2(-3) -5 = fourth iterate -11

18. 1.2 Composition of Functions
Homework from Textbook
Pages 17 – 18
Problems 11 – 27 odd problems

19. Graphing Linear Equations
Linear equations – these equations have a degree of 1 and take the general form of : Ax + By + C = 0, where A and B are not both 0 and where A, B, and C are real numbers. The graph for this type of equation is a line, hence the name linear.

20. 1.3 Graphing Linear Equations
Linear equations – Have a slope value that indicates the orientation of the line (increasing, decreasing, horizontal, or vertical) and the ratio of its change in height over its change in length.
(x1 , y1) 
y2 – y1
x2 – x1 y x
Slope, m = = y x 
(x2 , y2)

21. 1.3 Graphing Linear Equations
Forms for Linear Equations
Standard form Ax + By + C = 0; the value of slope, m = - A/B
Slope – Intercept form y = mx + b where m is the slope and b is the y-intercept value.
Slope is determined from the equation, from the intercept form, and from the standard form based upon what is known.

22. 1.3 Graphing Linear Equations
Types of Graphs of Lines
Positive
Slope
Negative
Slope
Slope = 0
Undefined
Slope

23. 1.3 Graphing Linear Equations
Linear functions – defined by the equation f(x) = mx + b where m and b are real numbers. If we insert values for x that cause f(x) to equal 0, we call these values zeroes of the function f. The zeroes of the function are also known as the x-intercepts of the function f. Each line has exactly one zero of the function value.

24. 1.3 Graphing Linear Equations
Linear functions can also take the form of f(x) = c, where c is a constant number. This is called a constant function and always creates a horizontal graph that is parallel to the x-axis.
f(x) = 3; for all x values that are inserted into the function, the function will always equal 3.

25. 1.4 Writing Linear Equations
Linear equations can be determined from several different methods depending on what information is given about the line.
When given a slope of a line, m1 and a point on that line, (x1, y1), we can combine this information to determine the equation of the line using the Point – Slope Method. This method uses the equation:
(y – y1) = m(x – x1) .

26. 1.4 Writing Linear Equations
Example: Find the equation of a line having a slope of m = 2 that passes through (-3, 6)
(y – y1) = m(x – x1)
(y – 6) = 2(x - -3) y – 6 = 2x + 6
In slope intercept form we get: y = 2x
In standard form we get: 2x – y = 0
For standard form, always put the x coefficient first and ensure that the coefficient is positive (+) and an integer.

27. 1.4 Writing Linear Equations
Example: Find the equation of a line having a slope of m = 2 and a y-intercept of 5
y = mx + b
y = 2x + 5
In slope intercept form we get: y = 2x + 5
In standard form we get: 2x – y +5 = 0
For standard form, always put the x coefficient first and ensure that the coefficient is positive (+) and an integer.

28. 1.3 Graphing Linear Equations 1.4 Writing Linear Equations
Homework from Textbook
Pages 24 – 25
Problems 13 – 39 odd
Page 30
Problems 11 – 23 odd

29. 1.5 Writing Equations of Parallel and Perpendicular Lines
Parallel Lines – Two nonvertical lines in a plane are parallel if and only if their slopes are equal and they have not points in common. If the lines have the same slope and have points in common they are said to coincide.
Lines of Coincidence
Parallel Lines
m1 = m2

30. 1.5 Writing Equations of Parallel and Perpendicular Lines
Example : 3x – 4y = 12 m1 = -(3/-4) = 3/4
9x – 12y = 72 m2 = -(9/-12) = 3/4
Put both equations into slope-intercept form.
y = 3/4 x – 3 and y = 3/4 x – 6.
They have the same slope, ¾, but different intercepts. This means the lines must be parallel to each other.

31. 1.5 Writing Equations of Parallel and Perpendicular Lines
Example : 15x + 12y = 36 m1 = -(15/12) = - 5/4
5x + 4y = 12 m2 = -(5/4) = - 5/4
Put both equations into slope-intercept form.
y = -5/4 x + 3 and y = -5/4 x + 3.
They have the same slope, ¾, and the same intercepts. This means the lines must coincide with each other.

32. 1.5 Writing Equations of Parallel and Perpendicular Lines
Perpendicular Lines – Two lines in a plane are perpendicular if and only if their slopes are opposite reciprocals. For slopes to be negative reciprocals m1  m2 = - 1.
m1  m2 = -1
Perpendicular Lines
Ex: m1 = ½ m2 = - 2

33. 1.5 Writing Equations of Parallel and Perpendicular Lines
Example: Write the standard form of the equation of the line that passes through the point (4,-7) and is parallel to the graph of 2x – 5y + 8 = 0
Solution: m1 =-( 2/-5) = 2/5. Since the line is parallel, its slope, m2 = 2/5. We can now use the point – slope method to determine the equation of our line.
(y – y1) = m(x – x1)  (y - -7) = 2/5(x – 4)  (y+7) = 2/5(x – 4)
5y + 35 = 2x – 8  2x – 5y = 43

34. 1.5 Writing Equations of Parallel and Perpendicular Lines
Example: Write the standard form of the equation of the line that passes through the point (4,-7) and is perpendicular to the graph of 2x – 5y + 8 = 0
Solution: m1 =-( 2/-5) = 2/5. Since the line is perpendicular, its slope, m2 = - 5/2. We can now use the point – slope method to determine the equation of our line.
(y – y1) = m(x – x1)  (y - -7) = - 5/2(x – 4)  (y+7) = - 5/2(x – 4)
2y + 14 = -5x + 20  5x + 2y = 6

35. 1.5 Writing Equations of Parallel and Perpendicular Lines
Homework from Textbook
Pages 36 – 37
Problems 13 – 33 odd problems